Commit graph

16494 commits

Author SHA1 Message Date
Brian Norris
07aac648a1 tests: dbus: Add test for RemoveAllNetworks while connected
This likely passes today (at least without ASAN), but without the next
commit, it trips up a use-after-free bug, which ASAN can catch.

So consider this a regression test.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:36:18 +03:00
Brian Norris
4b0bf0ec6e tests: run-tests: Do not use sudo if already root
Among other things, sudo can disrupt environment variables that a caller
provides.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:33:00 +03:00
Brian Norris
4dbba548ae tests: Skip busctl tests when not available
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 20:31:43 +03:00
Georg Müller
2818e9ca90 wpa_supplicant: Do not retry scan if operation is not supported
When using NetworkManager to set up an access point, there seems to be a
race condition which can lead to a new log message every second.

The following message appears in AP mode:

    CTRL-EVENT-SCAN-FAILED ret=-95 retry=1

Normally, this log message only appears once. But then (and only then)
the race is triggered and they appear every second, the following log
messages are also present:

    Reject scan trigger since one is already pending
    Failed to initiate AP scan

This patch just disables the retry for requests where the operation is
not supported anyway.

Signed-off-by: Georg Müller <georgmueller@gmx.net>
2020-10-10 20:26:18 +03:00
Benjamin Berg
c0b88d1291 P2P: Limit P2P_DEVICE name to appropriate ifname size
Otherwise the WPA_IF_P2P_DEVICE cannot be created if the base ifname is
long enough. As this is not a netdev device, it is acceptable if the
name is not completely unique. As such, simply insert a NUL byte at the
appropriate place.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
2020-10-10 20:24:55 +03:00
Markus Theil
566ea1b7ce mesh: Set correct address for mesh default broadcast/multicast keys
wpa_drv_set_key() was called with a NULL address for IGTK and MGTK
before this patch. The nl80211 driver will then not add the
NL80211_KEY_DEFAULT_TYPE_MULTICAST flag for the key, which wrongly marks
this key also as a default unicast key in the Linux kernel.

With SAE this is no real problem in practice, as a pairwise key will be
negotiated in mesh mode, before the first data frame gets send. When
using IEEE 802.1X in a mesh network in the future, this gets a problem,
as Linux now will encrypt EAPOL frames with the default key, which is
also marked for unicast usage without this patch.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-10-10 20:19:09 +03:00
Jouni Malinen
48aebcc31b tests: D-Bus Roam
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-10-10 20:15:34 +03:00
Brian Norris
17d6ba4c9e DBus: Add "Roam" command support
Add D-Bus interface for ROAM command, imitating the existing wpa_cli
command.

Chromium OS has been carrying a form of this patch for a very long time.
I've cleaned it up a bit and documented it.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 19:59:17 +03:00
Jouni Malinen
6e757bba8a Use consistent spelling of "homogeneous"
The 'H' in HESSID was originally spelled "homogenous" in IEEE Std
802.11-2016 abbreviations and acronyms list, but that was changed in
REVmd to the significantly more common spelling "homonegeneous". Update
this older version to match the new spelling to be consistent throughout
the repository.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-10-10 18:34:59 +03:00
Yegor Yefremov
5b0ba21a03 doc: Fix typos
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-10-10 18:34:59 +03:00
Kevin Lund
cff545720e wpa_supplicant: Clear blacklist when SSID configs change
If the stored configurations for an SSID have changed, we can no longer
trust the current blacklist state of that SSID, since the updated
configs could change the behavior of the network. E.g., the BSS could be
blacklisted due to a bad password, and the config could be updated to
store the correct password. In this case, keeping the BSS in the
blacklist will prevent the user from connecting to the BSS after the
correct password has been updated.

Add the value was_changed_recently to the wpa_ssid struct. Update this
value every time a config is changed through wpa_set_config(). Check
this value in wpa_blacklist_get() to clear the blacklist whenever the
configs of current_ssid have changed.

This solution was chosen over simply clearing the blacklist whenever
configs change because the user should be able to change configs on an
inactive SSID without affecting the blacklist for the currently active
SSID. This way, the blacklist won't be cleared until the user attempts
to connect to the inactive network again. Furthermore, the blacklist is
stored per-BSSID while configs are stored per-SSID, so we don't have the
option to just clear out certain blacklist entries that would be
affected by the configs.

Finally, the function wpa_supplicant_reload_configuration() causes the
configs to be reloaded from scratch, so after a call to this function
all bets are off as to the relevance of our current blacklist state.
Thus, we clear the entire blacklist within this function.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
bbbb3c04ef wpa_supplicant: Add new blacklist tests
This change adds some barebones tests for new blacklisting functionality
to wpas_module_tests.c. The tests ensure some basic functionality for
the functions wpa_blacklist_is_blacklisted() and wpa_blacklist_update().

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
164b8dd8e4 wpa_supplicant: Add wpa_blacklist_update()
This change adds the function wpa_blacklist_update(), which goes through
all blacklist entries and deletes them if their blacklist expired over
an hour ago. The purpose of this is to remove stale entries from the
blacklist which likely do not reflect the current condition of device's
network surroundings. This function is called whenever the blacklist is
polled, meaning that the caller always gets an up-to-date reflection of
the blacklist.

Another solution to clearing the blacklist that was considered was
to slowly reduce the counts of blacklist entries over time, and delete
them if the counts dropped below 0. We decided to go with the current
solution instead because an AP's "problematic" status is really a binary
thing: either the AP is no longer problematic, or it's still causing us
problems. So if we see any more problems within a reasonable amount of
time, it makes sense to just keep the blacklist where it was since the
AP is likely still undergoing the same issue. If we go a significant
amount of time (semi-arbitrarily chosen as 1 hour) without any issues
with an AP, it's reasonable to behave as if the AP is no longer
undergoing the same issue. If we see more problems at a later time, we
can start the blacklisting process fresh again, treating this as a brand
new issue.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
d530110028 wpa_supplicant: Implement time-based blacklisting
wpa_supplicant keeps a blacklist of BSSs in order to prevent repeated
associations to problematic APs*. Currently, this blacklist is
completely cleared whenever we successfully connect to any AP. This
causes problematic behavior when in the presence of both a bad AP and
a good AP. The device can repeatedly attempt to roam to the bad AP
because it is clearing the blacklist every time it connects to the good
AP. This results in the connection constantly ping-ponging between the
APs, leaving the user stuck without connection.

Instead of clearing the blacklist, implement timeout functionality which
allows association attempts to blacklisted APs after some time has
passed. Each time a BSS would be added to the blacklist, increase the
duration of this timeout exponentially, up to a cap of 1800 seconds.
This means that the device will no longer be able to immediately attempt
to roam back to a bad AP whenever it successfully connects to any other
AP.

Other details:
The algorithm for building up the blacklist count and timeout duration
on a given AP has been designed to be minimally obtrusive. Starting with
a fresh blacklist, the device may attempt to connect to a problematic AP
no more than 6 times in any ~45 minute period. Once an AP has reached a
blacklist count >= 6, the device may attempt to connect to it no more
than once every 30 minutes. The goal of these limits is to find an
ideal balance between minimizing connection attempts to bad APs while
still trying them out occasionally to see if the problems have stopped.

The only exception to the above limits is that the blacklist is still
completely cleared whenever there are no APs available in a scan. This
means that if all nearby APs have been blacklisted, all APs will be
completely exonerated regardless of their blacklist counts or how close
their blacklist entries are to expiring. When all nearby APs have been
blacklisted we know that every nearby AP is in some way problematic.
Once we know that every AP is causing problems, it doesn't really make
sense to sort them beyond that because the blacklist count and timeout
duration don't necessarily reflect the degree to which an AP is
problematic (i.e. they can be manipulated by external factors such as
the user physically moving around). Instead, its best to restart the
blacklist and let the normal roaming algorithm take over to maximize
our chance of getting the best possible connection quality.

As stated above, the time-based blacklisting algorithm is designed to
be minimally obtrusive to user experience, so occasionally restarting
the process is not too impactful on the user.

*problematic AP: rejects new clients, frequently de-auths clients, very
poor connection quality, etc.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Kevin Lund
2fd35d9857 wpa_supplicant: Track consecutive connection failures
Within wpas_connection_failed(), the 'count' value of wpa_blacklist is
erroneously used as a tally of the number times the device has failed
to associate to a given BSSID without making a successful connection.
This is not accurate because there are a variety of ways a BSS can be
added to the blacklist beyond failed association such as interference
or deauthentication. This 'count' is lost whenever the blacklist is
cleared, so the wpa_supplicant stores an additional value
'extra_blacklist_count' which helps persist the 'count' through clears.
These count values are used to determine how long to wait to rescan
after a failed connection attempt.

While this logic was already slightly wrong, it would have been
completely broken by the upcoming change which adds time-based
blacklisting functionality. With the upcoming change, 'count' values
are not cleared on association, and thus do not necessarily even
approximate the "consecutive connection failures" which they were being
used for.

This change seeks to remove this unnecessary overloading of the
blacklist 'count' by directly tracking consecutive connection failures
within the wpa_supplicant struct, independent of the blacklist. This new
'consecutive_conn_failures' is iterated with every connection failure
and cleared when any successful connection is made. This change also
removes the now unused 'extra_blacklist_count' value.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Jouni Malinen
5653301409 tests: Prepare ap_blacklist_all for implementation change
The blacklist design will be modified in the following commits and that
would result in this validation step based on the older implementation
starting to fail. Remove this check to avoid such testing failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-10-10 18:34:59 +03:00
Yogesh Kulkarni
6d6310701b Fix STA mode default TXOP Limit values for AC_VI and AC_VO
commit f4e3860f ("Fix AP mode default TXOP Limit values for AC_VI
and AC_VO") corrects the default values of txop_limit from 93/46
to 94/47 for AP. STA would also need the same change.

Signed-off-by: Yogesh Kulkarni <yogesh.kulkarni@nxp.com>
Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-10-10 17:04:27 +03:00
Johannes Berg
dcc5288e5b gitignore: Add various things
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 13:06:53 +03:00
Johannes Berg
ce963433bd build: Allow overriding BUILDDIR from command line
You can now specify BUILDDIR= on the make command line,
e.g., in order to put that into a tmpfs or similar.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 13:06:53 +03:00
Johannes Berg
b3313939b7 tests: Use new build system for the tests
I had previously kept that building in the sources, but
we can also change that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 13:01:37 +03:00
Johannes Berg
e150641f78 tests: Rewrite .gitignore file
The file was already outdated again, so rewrite it to ignore
anything but c, h and sh files that start with "test-".

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:54:30 +03:00
Johannes Berg
ad6e4a5c59 build: Remove hostapd vs. wpa_supplicant build checks
These are no longer needed now. Note that this was never actually
sufficient since src/drivers/ isn't the only thing shared, and thus a
cross-build detection didn't work in all cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:53:38 +03:00
Johannes Berg
6acda53222 build: Add .config file to dependencies
If the .config file changes, basically everything needs to be
rebuilt since we don't try to detect which symbols changed or
such. Now that the .config file handling is in the common
build system, make everything depend on it if there's one.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:52:58 +03:00
Johannes Berg
722138cd25 build: Put object files into build/ folder
Instead of building in the source tree, put most object
files into the build/ folder at the root, and put each
thing that's being built into a separate folder.

This then allows us to build hostapd and wpa_supplicant
(or other combinations) without "make clean" inbetween.

For the tests keep the objects in place for now (and to
do that, add the build rule) so that we don't have to
rewrite all of that with $(call BUILDOBJS,...) which is
just noise there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:51:39 +03:00
Johannes Berg
0464d5d5d6 build: Move config file handling into build.rules
This will make it easier to split out the handling in
a proper way, and handle common cflags/dependencies.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:49:31 +03:00
Johannes Berg
0430bc8267 build: Add a common-clean target
Clean up in a more common fashion as well, initially for ../src/.

Also add $(Q) to the clean target in src/

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:48:41 +03:00
Johannes Berg
06a6adb54e build: Use build.rules in lib.rules
Use the new build.rules in lib.rules and also unify the
clean targets to lib.rules.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:41 +03:00
Johannes Berg
3ff115db6f build: Disable built-in rules
This makes things faster and easier to debug.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:41 +03:00
Johannes Berg
a41a29192e build: Pull common fragments into a build.rules file
Some things are used by most of the binaries, pull them
into a common rule fragment that we can use properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:29 +03:00
Johannes Berg
21cc50a434 HS 2.0 server: Add a .gitignore file
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:42:58 +03:00
Thomas Pedersen
a28d127b1a AP: Reflect status code in SAE reflection attack test
When testing SAE reflection, the incoming commit may have the H2E status
code (126) or SAE-PK (127), but the test code in the AP was always
sending back status code 0. The STA would then reject the commit
response due to expecting H2E/SAE-PK status code.

Just reflect the incoming status code so the commit can be rejected
based on the SAE contents regardless of which variant of SAE was used.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
2020-10-09 16:50:36 +03:00
Roy Marples
e8b85c078e iface match: Unspecified matched interfaces should not log driver fails
If there is no matching interface given, but interface matching is
enabled, all interfaces on the system will try to be initialized. Non
wireless interfaces will fail and the loopback device will be one of
these, so just log a diagnostic rather than an error.

Signed-off-by: Roy Marples <roy@marples.name>
2020-10-09 16:50:36 +03:00
Roy Marples
83fa0a1004 op_classes: Don't report an error when there are none to add
Instead, log a diagnostic so that noise to the user is reduced. This is
expected behavior with driver interfaces that do not report supported
operating modes/classes.

Signed-off-by: Roy Marples <roy@marples.name>
2020-10-09 16:50:36 +03:00
Roy Marples
8776551bf8 BSD: don't log SIOCG80211 errors during interface setup
Unless debugging.
wpa_supplicant will log it failed to initialized the driver for the
interface anyway so this just silences some noise for users.

Signed-off-by: Roy Marples <roy@marples.name>
2020-10-09 16:50:36 +03:00
Jouni Malinen
fb0c693d5f tests: bgscan parameter update
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-09 16:50:36 +03:00
Matthew Wang
41d20df7f3 D-Bus: Allow empty string in dbus network properties
This is needed for clearing previously set parameters in a similar
manner that was already available through the control interface
SET_NETWORK command.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Jouni Malinen
b2a1424659 tests: Empty network profile parameters will be valid
Remove this part of the dbus_network test case since it would be causing
failures after wpa_supplicant is modified to accept empty strings
through D-Bus.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-09 16:50:36 +03:00
Matthew Wang
4756ecabcf Allow bgscan parameters to be reconfigured
Teach wpa_supplicant to {de,}initialize bgscans when bgscan parameters
are set after initial connection.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Matthew Wang
922fa09972 Global parser functions to return 1 when property unchanged
Currently, wpa_config_set(), the function that sets wpa_supplicant
per-network properties, returns 1 when a property it attempts to set is
unchanged. Its global parallel, wpa_config_process_global(), doesn't do
this even though much of the code is very similar. Change this, and
several of the parser functions, to resemble the per-network parser and
setter functions.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Matthew Wang
a87173b1d1 D-Bus: Skip property update actions when wpa_config_set() returns 1
When network properties are updated via dbus, wpa_config_set() is used
to update the property in the wpa_ssid struct. If it returns 1, the
property was not changed and there's no need to perform any of the
update actions.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 15:31:05 +03:00
Beniamino Galvani
1c58317f56 D-Bus: Allow changing an interface bridge via D-Bus
D-Bus clients can call CreateInterface() once and use the resulting
Interface object to connect multiple times to different networks.

However, if the network interface gets added to a bridge, clients
currently have to remove the Interface object and create a new one.

Improve this by supporting the change of the BridgeIfname property of
an existing Interface object.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2020-10-09 15:18:10 +03:00
Janusz Dziedzic
48e4680dae tests: remote: Add run_monitor test case
This is useful to run monitor quickly:
./run-tests.py -t run_monitor -m mon:36,20,36,0:1,20,1,0

In such example we will get one PCAP for 36/20 and 1/20.
After execution, PCAP file is in the log directory, e.g.:
./logs/2019_11_11_13_36_24/run_monitor_mon_wlp3s0_wlp5s0.pcap

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:24:00 +03:00
Janusz Dziedzic
c203897a88 tests: remote: Allow passing of parameters with monitor interface
This is mainly for standalone monitor in case we know and would like to
setup specific monitor configuration.

-m monitor:<chan>,<bw>, <cf1>, <cf2>:...

For example:
-m monitor:1,40,3,0
-m e4300:1,40,3,0:11,40,9,0

This also supports monitor with multiple interfaces (one pcap).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:21:05 +03:00
Janusz Dziedzic
8456b9e7db tests: remote: Allow passing of parameters with devname
Allow parameters to be passed together with the device name. For
example, -m mon1:1,20,1,0

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:19:23 +03:00
Janusz Dziedzic
777afa9f07 tests: remote: Unblock rfkill on monitor
Unblock wifi rfkill before setup/run monitor.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:18:30 +03:00
Janusz Dziedzic
925dea791a tests: remote: Stop wpa_supplicant/hostapd using pidfile
Instead of killall, use pidfile.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:18:00 +03:00
Janusz Dziedzic
adf6cfb0ab tests: remote: monitor use execute_stop()
Stop the single thread instead of killing all monitor apps.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:17:11 +03:00
Janusz Dziedzic
14d28a655a tests: remotehost add execute_stop()
Before we have to kill an application we start in the thread - in most
cases using killall and sometimes kill other applicantions, e.g., tcpdump,
iper, iperf3, tshark.

With this patch we are able to stop/kill a single application/thread
instead, based on the pid file.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:15:42 +03:00
Janusz Dziedzic
fed855d5dd tests: remote host stderr workaround
In case we are using ssh MUX (which speed up a lot test execution) with
remotehost we could hit cases where ssh will hang up. This depends on
different ssh versions and remotehost implementation.

stderr as a tmpfile fixes this problem.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:13:48 +03:00
Janusz Dziedzic
ac6595f281 tests: remote: Sort tests correctly
Problem appeared after introducing python3 support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-10-09 11:11:32 +03:00