Commit graph

6555 commits

Author SHA1 Message Date
Jouni Malinen
06e62e11c7 DPP: Fix a debug print to use quotation marks consistently
The "DPP: Unexpected JWK kty" debug print missed one of the quotation
marks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 17:31:49 +02:00
Jouni Malinen
11f07f027a DPP: Fix error path handling for GAS Comeback Response building
A local memory allocation failuring during GAS Comeback Response frame
generation could result in freeing the response context without removing
it from the list. This would result in dereferencing freed memory when
processing the next comeback request.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:51:26 +02:00
Jouni Malinen
c7896ef9c6 DPP: Fix memory leaks in GAS server error path handling
If local memory allocation for the GAS response failed, couple of error
paths ended up leaking some memory maintaining the state for the
exchange. Fix that by freeing the context properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:49:44 +02:00
Johannes Berg
babdd8d0d9 nl80211: Use correct u8 size for NL80211_ATTR_SMPS_MODE
Back in December 2017, Jouni fixed the output side since that was
causing a kernel message to be printed, but the input side should
also be fixed, otherwise it will not work correctly on big-endian
platforms.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-22 15:53:30 +02:00
Jouni Malinen
adbce7443d HS 2.0: Update HS2.0 AP version RADIUS attribute Version field
Use HS20_VERSION macro to determine if R3 should be indicated instead of
R2.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 23:38:31 +02:00
Jouni Malinen
dc673aec46 HS 2.0: Generate AssocReq OSEN IE based on AP advertisement
Parse the OSEN IE from the AP to determine values used in the AssocReq
instead of using hardcoded cipher suites. This is needed to be able to
set the group cipher based on AP advertisement now that two possible
options exists for this (GTK_NOT_USED in separate OSEN BSS; CCMP or
GTK_NOT_USED in shared BSS case). Furthermore, this is a step towards
allowing other ciphers than CCMP to be used with OSEN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:07:16 +02:00
Sachin Ahuja
d554402140 Define new QCA vendor command for coex priority config
Add QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG vendor command
to set the priorities among different types of traffic of
WLAN/BT/Zigbee during coex scenarios.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 00:20:09 +02:00
vamsi krishna
a626fb1070 Add QCA vendor event to indicate throughput changes
Add interface for drivers to report changes in TX/RX throughput
dynamically to user space. This information can be used by userspace
tools to tune kernel's TCP parameters in order to achieve peak
throughput. The driver may optionally provide guidance on which TCP
parameters to be configured for optimal performance along with the
values to be configured.

The TCP parameters that need to be tuned for peak performance are not
interface specific. Based on the guidance from the driver and
considering the other interfaces that may be affected with the new
configurations, a userspace tool has to choose the values to be
configured for these parameters to achieve optimal performance across
interfaces.

The throughput levels informed by the driver with this event are only
for providing guidance on TCP parameter tuning from userspace. The
driver may change the thresholds used to decide low or medium or high
throughput levels based on several parameters based on the PHY layer
capacity in the current connection, the number of packets being
dispatched per second, or the number of packets pending in queues, etc.
The throughput levels may not be consistent with the actual throughput
of the link.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-08 21:56:58 +02:00
Kiran Kumar Lokere
5d332a13f7 Add test config QCA vendor attribute for action frame Tx in TB PPDU
Add a new wifi test config QCA vendor attribute to configure action
frame transmission in HE trigger based PPDU.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:10:18 +02:00
Kiran Kumar Lokere
a94aab6ddd Define test config QCA vendor attribute for HE SU PPDU Tx config
Add a new wifi test config QCA vendor attribute to configure HE
single user PPDU transmission.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:38 +02:00
Kiran Kumar Lokere
292bce08b3 Define test config QCA vendor attribute for HE OM control config
Add a new wifi test config QCA vendor attributes to configure HE
operating mode control field bandwidth, number of spatial streams, and
UL MU disable configuration. Define a new attribute to clear the
previously set HE OM control field configuration. This is used for
testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:22 +02:00
Jouni Malinen
ab3ab50757 HS 2.0: Fix Terms and Conditions URL handling
Do not try to determine the length of the T&C Server URL before checking
that the URL is available. This got broken in a change to move the
handling to the AS. hostapd could potentially have hit a NULL pointer
dereference if the authentication server sent an unconsistent set of T&C
information.

Fixes: d4e39c51f8 ("HS 2.0: Move Terms and Conditions Server URL generation from AP to AS")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 19:15:11 +02:00
Ankita Bajaj
0f0aa2a640 OCE: Move OCE checks to IE formation from hostapd initialization
Earlier, the OCE flags were checked during hostapd initialization. This
doesn't address few cases like for example when the interface is added
from control interface. Move the OCE flag checks to the functions that
are forming the MBO/OCE IEs to cover all the different paths for
enabling a BSS. Also use macros as appropriate for readability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 15:43:01 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Peng Xu
224eddb03b nl80211: Read reg-domain information from a specific wiphy
If driver supports self-managed regulatory domain, read reg-domain
information for that specific wiphy interface instead the global
information which may be different which such drivers. This fixes issues
where a regulatory update with a self-managed regulatory domain driver
ended up building incorrect list of supported channels for upper layer
hostapd/wpa_supplicant operations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-24 18:36:34 +03:00
Peng Xu
8aa4d5521c nl80211: Add support for self-managed regulatory device
Add a flag indicating if the device has the self-managed regulatory
support. Set the flag if NL80211_ATTR_WIPHY_SELF_MANAGED_REG attribute
is set when reading wiphy info.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-24 18:34:31 +03:00
Karol Babioch
ac1f591567 Enable the close-on-exec flag for the debug log file descriptor
On Linux this flag will make sure that no file descriptor is
accidentally leaked into potential child processes. While this is not a
problem right now, it is considered to be good practice these days when
dealing with file descriptors on Linux.

Signed-off-by: Karol Babioch <karol@babioch.de>
2018-10-20 19:26:03 +03:00
Karol Babioch
1737eb3982 Create debug log file with more sane file permissions
Previously the file permissions for the debug log file were not
explicitly set. Instead it was implicitly relying on a secure umask,
which in most cases would result in a file that is world-readable. This
is a violation of good practices, since not every user should have
access to sensitive information that might be contained in the debug log
file.

Explicitly set sane default file permissions in case the file is newly
created.

Unfortunately the fopen(3) function does not provide such a facility, so
the approach needs to be changed in the following way:

1) The file descriptor needs to be created manually using the open(3)
function with the correct flags and the desired mode set.

2) fdopen(3) can then be used on the file descriptor to associate a file
stream with it.

Note: This modification will not change the file permissions of any
already existing debug log files, and only applies to newly created
ones.

Signed-off-by: Karol Babioch <karol@babioch.de>
2018-10-20 19:15:54 +03:00
Ilan Peer
f13aaf33fb AP: Place the WPA IE in the correct order
In case the protocol used for the BSS is WPA, the WPA vendor IE should
be placed after all the non vendor IEs. Fix this for Beacon and Probe
Response frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-20 11:28:29 +03:00
Sriram R
7b2ca5cf0d hostapd: Reset channel switch parameters on interface disable
Previously, when an AP interface was disabled through a control
interface DISABLE command during a channel switch window, the interface
could not be reenabled due to beacon setup failure (which validates if
CSA is in progress).

Fix this by clearing channel switch parameters while disabling the
hostapd interface.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
2018-10-19 21:26:03 +03:00
Peng Xu
2f186d598a Define vendor specific NDP attribute for peer NDPE support
Add NAN NDP attribute QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT which
indicates if NDP remote peer supports NDPE attribute or not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 20:44:44 +03:00
Andrei Otcheretianski
68500d8159 AP: Warn about VLAN interface name truncations
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:56:04 +03:00
Andrei Otcheretianski
d577f7f3d5 nl80211: Warn about interface name truncations
This is something useful to know and also eliminates format truncation
warnings.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:53:15 +03:00
Johannes Berg
94919da24d RSN: Use COMPACT_MACSTR to match MAC2STR
We shouldn't open-code the %02x... when we have COMPACT_MACSTR.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-16 12:33:22 +03:00
Nishant Chaprana
391d922bcf EAP-pwd peer: Fix memory leak in eap_pwd_perform_confirm_exchange()
hash variable is allocated memory using eap_pwd_h_init(), but there are
couple of error case code paths which skips deallocation of hash. The
memory of hash is deallocated using eap_pwd_h_final(). Fix this by
calling eap_pwd_h_final() at the end of the function if execution got
there through one of those error cases.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2018-10-16 12:11:32 +03:00
Sathishkumar Muruganandam
72a09d43fe Fix 5 GHz to 2.4 GHz channel switch with hostapd through DISABLE/ENABLE
When moving a 5 GHz VHT AP to 2.4 GHz band with VHT disabled through the
hostapd control interface DISABLE/reconfig/ENABLE commands, enabling of
the AP on 2.4 GHz failed due to the previously configured VHT capability
being compared with hardware VHT capability on 2.4 GHz band:

hw vht capab: 0x0, conf vht capab: 0x33800132
Configured VHT capability [VHT_CAP_MAX_MPDU_LENGTH_MASK] exceeds max value supported by the driver (2 > 0)
ap: interface state DISABLED->DISABLED

Since VHT (ieee80211ac) config is already disabled for the 2.4 GHz band,
add fix this by validating vht_capab only when VHT is enabled.

Fixes: c781eb8428 ("hostapd: Verify VHT capabilities are supported by driver")
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-10-16 00:50:40 +03:00
Ashok Kumar
edb28006c4 PMF: Do not start SA Query procedure if there is no association
Previous implementation ended up triggering PMF check for previous
association and SA Query procedure incorrectly in cases where there is a
STA entry in hostapd, but that STA is not in associated state. This
resulted in undesired temporary rejection of the association with status
code 30.

This ended up breaking OWE group negotiation when PMF is in use since
the check for the OWE group would have happened only after this earlier
PMF check and rejection (i.e., the station got status code 30 instead of
the expected 77).

For example, when the AP is configured with OWE group 21 and a station
tries groups 19, 20, and 21 (in this sequence), the first two
Association Request frames should be rejected with status code 77.
However, only the first one got that status code while the second one
got status code 30 due to that issue with PMF existing association
check.

Furthermore, hostapd was continuing with SA Query procedure with
unencrypted Action frames in this type of case even though there was no
existing association (and obviously, not an encryption key either).

Fix this by checking that the STA entry is in associated state before
initiating SA Query procedure based on the PMF rules.

Signed-off-by: Ashok Kumar <aponnaia@codeaurora.org>
2018-10-16 00:33:20 +03:00
Johannes Berg
40432e6eb3 nl80211: Implement netlink extended ACK support
Implement netlink extended ACK support to print out the error
message (if any).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-14 20:20:11 +03:00
Hauke Mehrtens
74eebe93d0 SAE: Do not ignore option sae_require_mfp
Without this patch sae_require_mfp is always activate, when ieee80211w
is set to optional all stations negotiating SAEs are being rejected when
they do not support PMF. With this patch hostapd only rejects these
stations in case sae_require_mfp is set to some value and not null.

Fixes ba3d435fe4 ("SAE: Add option to require MFP for SAE associations")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 20:13:16 +03:00
Jouni Malinen
dc1b1c8db7 Drop logging priority for handle_auth_cb no-STA-match messages
This message was printed and MSG_INFO level which would be more
reasonable for error cases where hostapd has accepted authentication.
However, this is not really an error case for the cases where
authentication was rejected (e.g., due to MAC ACL). Drop this to use
MSG_DEBUG level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-10-14 20:03:55 +03:00
Jouni Malinen
6588f71222 Reduce undesired logging of ACL rejection events from AP mode
When Probe Request frame handling was extended to use MAC ACL through
ieee802_11_allowed_address(), the MSG_INFO level log print ("Station
<addr> not allowed to authenticate") from that function ended up getting
printed even for Probe Request frames. That was not by design and it can
result in excessive logging and MSG_INFO level if MAC ACL is used.

Fix this by printing this log entry only for authentication and
association frames. In addition, drop the priority of that log entry to
MSG_DEBUG since this is not really an unexpected behavior in most MAC
ACL use cases.

Fixes: 92eb00aec2 ("Extend ACL check for Probe Request frames")
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-10-14 19:57:22 +03:00
Purushottam Kushwaha
e8581183f9 HS 2.0: Use execve() with custom env PATH to launch browser using 'am'
With new restriction in Android, if PATH env variable doesn't have
correct path of 'am' binary, execv() fails to launch wpadebug browser
(am starts, but something seems to fail within its internal processing).

This commit is a workaround to use execve() with custom environment PATH
which includes "/system/bin;/vendor/bin" to handle the cases where
hs20-osu-client fails to launch wpadebug browser through /system/bin/am.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 15:51:05 +03:00
Visweswara Tanuku
77fcd74753 QCA vendor subcommand and attributes to configure capture of CFR data
Add a subcommand for Channel Frequency Response (CFG) Capture
Configuration and define attributes for configuring CFR capture
parameters per peer and enabling/disabling CFR capture.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
7770a9dd6a RADIUS: Support last_msk with EAP-TLS
This extends the last_msk testing functionality in the RADIUS server to
work with EAP-TLS based on "cert-<serial_num>" form user names in the
database.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
063cbb87a6 EAP server: Add eap_get_serial_num()
This can be used to fetch the serial number of the peer certificate
during TLS-based EAP session.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
0ec3e77a13 TLS: Add tls_connection_peer_serial_num()
This can be used to fetch the serial number of the peer certificate in
the EAP server. For now, this is implemented only with OpenSSL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
18003b315b AS: Add an event_cb() callback handler
This provides debug log information on TLS events on the server side.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
2ff952a5dd OpenSSL: Make serial number of peer certificate available in event_cb
Add serial number to the event_cb() information for the peer certificate
chain.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
cad810a98f HS 2.0: OSU Provider NAI List advertisement
Extend hostapd to allow the new OSU Provider NAI List ANQP-element to be
advertised in addition to the previously used OSU Providers list
ANQP-element. The new osu_nai2 configurator parameter option is used to
specify the OSU_NAI value for the shared BSS (Single SSID) case while
osu_nai remains to be used for the separate OSU BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:49:42 +03:00
vamsi krishna
edb509d49f Add QCA vendor event to report roam scan events
Driver/firmware does roam scan when it finds the need to roam to a
different BSS. Add a QCA vendor event to indicate such roam scan events
from driver/firmware to user space.

Please note that some drivers may not send these events in few cases,
e.g., if the host processor is sleeping when this event is generated in
firmware to avoid undesired wakeups.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-04 00:31:45 +03:00
Jouni Malinen
17d4b77472 RSN: Do not replace existing Suite B PMKSA on 4-way handshake
PMKID derivation with the Suite B AKMs is a special case compared to
other AKMs since that derivation uses KCK instead of PMK as an input.
This means that the PMKSA cache entry can be added only after KCK has
been derived during 4-way handshake. This also means that PMKID would
change every time 4-way handshake is repeated even when maintaining the
same PMK (i.e., during PTK rekeying and new associations even if they
use PMKSA caching).

wpa_supplicant was previously replacing the PMKSA cache entry whenever a
new PMKID was derived. This did not match hostapd expectations on the AP
side since hostapd did not update the PMKSA cache entry after it was
created. Consequently, PMKSA caching could be used only once (assuming
no PTK rekeying happened before that). Fix this by making wpa_supplicant
behave consistently with hostapd, i.e., by adding the Suite B PMKSA
cache entries with the PMKID from the very first 4-way handshake
following PMK derivation and then not updating the PMKID.

IEEE Std 802.11-2016 is somewhat vague in this area and it seems to
allow both cases to be used (initial PMKID or any consecutive PMKID
derived from the same PMK). While both cases could be supported that
would result in significantly more complex implementation and need to
store multiple PMKID values. It looks better to clarify the standard to
explicitly note that only the first PMKID derived after PMK derivation
is used (i.e., match the existing hostapd implementation).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-27 11:37:19 +03:00
Srikanth Marepalli
bd88ed60fa eap_proxy: Fix memory leaks when using eap_peer_erp_init()
The external session_id and emsk from eap_proxy_get_eap_session_id() and
eap_proxy_get_emsk() need to be freed consistently in all code paths
within eap_peer_erp_init() and outside it in the case ERP is not
initialized.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:34:08 +03:00
Ankita Bajaj
820ea0ba93 DPP: Fix a memory leak on Configurator keygen error path
The allocated configuration structure needs to be freed if the specified
curve is not supported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:22:42 +03:00
Ankita Bajaj
5a052f92eb DPP: Fix a memory leak in L derivation
The temporary EC_POINT 'sum' needs to be freed at the end of the
function with the other OpenSSL allocations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:21:14 +03:00
Ankita Bajaj
bae282e3e8 DPP: Fix an error path memory leak in URI public key parsing
The allocated buffer from base64_decode() needs to be freed on the
sha256_vector() error path.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:20:06 +03:00
Srikanth Marepalli
e662260162 Free dh_ctx on failure in wps_nfc_gen_dh()
This is needed to avoid a memory leak on an error path.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-20 17:18:16 +03:00
Varun Reddy Yeturu
60377efcc1 QCA vendor command support for TWT test configuration
Define new QCA vendor specific test config attributes to configure TWT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-18 13:03:02 +03:00
Jouni Malinen
2b92c4f3c0 DPP: Fix test functionality for invalid keys with OpenSSL 1.1.0
It looks like at least OpenSSL 1.1.0i includes the extra checks in
EC_POINT_set_affine_coordinates_GFp() that break the previously used
mechanism for generating invalid keys. Fix this by using the alternative
design that was used with OpenSSL 1.1.1 and BoringSSL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-17 17:23:10 +03:00
Jouni Malinen
3ecb8a5203 ANQP: Parse and report Venue URL information
Parse the Venue URL ANQP-element payload and report it with the new
RX-VENUE-URL event messages if the query was done using PMF.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-15 05:17:49 +03:00
Jouni Malinen
ad4e4f60a0 RADIUS server: Add testing support for authentication result
CONFIG_RADIUS_TEST builds can now update the user SQLite database based
on authentication result from the last attempt. If the database has a
last_msk column, that will be set to the hexdump of the MSK whenever
authentication succeeds and to "FAIL" whenever authentication fails.
This can be used for testing purposes by having an external program
track authentication status per user.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-11 04:02:36 +03:00