Commit graph

676 commits

Author SHA1 Message Date
Jouni Malinen
1325655397 SAE H2E: RSNXE override for testing purposes
"SET rsnxe_override_{assoc,eapol} <hexdump>" can now be used to override
RSNXE in (Re)Association Request frames and EAPOL-Key msg 2/4 for
testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 12:54:54 +02:00
Jouni Malinen
b834e97003 SAE H2E: Testing option to report extra rejected groups
"SET extra_sae_rejected_groups <groups>" can now be used to enable test
mode in which wpa_supplicant will report additional groups (configured
as space separated integers) when using SAE H2E.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:26:13 +02:00
Jouni Malinen
6d6c887751 SAE: Add RSNXE in Association Request and EAPOL-Key msg 2/4
Add the new RSNXE into (Re)Association Request frames and EAPOL-Key msg
2/4 when using SAE with hash-to-element mechanism enabled. This allows
the AP to verify that there was no downgrade attack when both PWE
derivation mechanisms are enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-17 16:54:05 +03:00
Dedy Lansky
cdb5774f42 FST: Update FST about MAC address change
Notify FST module upon MAC address change. FST module will update the
Multiband IE accordingly.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
447cd5f2df SAE: Collect list of rejected groups for H2E in STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
146889e3ca RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4
If the AP advertises RSN Extension element, it has to be advertised
consistently in the unprotected (Beacon and Probe Response) and
protected (EAPOL-Key msg 3/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Alexei Avshalom Lazar
a82aee1f40 wpa_supplicant: Add support for EDMG channels
As part of a connection request, set EDMG parameters for the driver to
use in the association. The EDMG parameters are based on EDMG IE
received from the AP's Probe Response frames, the driver's EDMG
capability, and the EDMG configuration from the configuration.

As part of starting an AP, set EDMG parameters for the driver to use for
AP operation. The EDMG parameters are based on the driver's EDMG
capability and the EDMG configuration from the configuration.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent, i.e., the supported values for
edmg_channel are 9..13.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
bebd91e9c4 Add EDMG parameters to set_freq functions
This updates the frequency parameter setting functions to include
argument for EDMG.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:23 +03:00
Vamsi Krishna
2e06cef80a MBO/OCE: Work around misbehaving MBO/OCE APs that use RSN without PMF
The MBO and OCE specification require the station to mandate use of PMF
when connecting to an MBO/OCE AP that uses WPA2. The earlier
implementation prevented such misbehaving APs from being selected for
connection completely. This looks like the safest approach to take, but
unfortunately, there are deployed APs that are not compliant with the
MBO/OCE requirements and this strict interpretation of the station
requirements results in interoperability issues by preventing the
association completely.

Relax the approach by allowing noncompliant MBO/OCE APs to be selected
for RSN connection without PMF to avoid the main impact of this
interoperability issue. However, disable MBO/OCE functionality when PMF
cannot be negotiated to try to be as compliant as practical with the
MBO/OCE tech spec requirements (i.e., stop being an MBO/OCE STA for the
duration of such workaround association). Also disable support for BTM
in this workaround state since MBO would expect all BTM frames to be
protected.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 00:58:33 +03:00
Jouni Malinen
16ef233bf1 DPP2: Connection status result (Enrollee)
Add support for reporting connection status after provisioning if the
Configurator requests this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-16 17:25:34 +03:00
Mikael Kanstrup
8788a314d7 WPS: Update MAC address on address changes
The WPS component keeps a copy of the network interface MAC address.
When MAC address is changed the WPS copy was not updated so WPS M1
message contained the old address. Some devices check this field
and fail connection attempts.

Update the WPS MAC address on interface MAC address changes.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2019-09-09 16:49:34 +03:00
Ankita Bajaj
a8bfc6fff2 FILS: Update connect params after sending connection notification
Update connect params will update auth_alg and fils_hlp_req in
wpa_supplicant structure before calling function
wpas_notify_state_changed(). This could have resulted in triggering
inconsistent state change events and messages in the Android framework.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-08 17:50:23 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
b99c4cadb7 EAP peer: Move certificate configuration params into shared struct
These parameters for certificate authentication are identical for the
Phase 1 (EAP-TLS alone) and Phase 2 (EAP-TLS inside a TLS tunnel).
Furthermore, yet another copy would be needed to support separate
machine credential in Phase 2. Clean this up by moving the shared
parameters into a separate data struct that can then be used for each
need without having to define separate struct members for each use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:31 +03:00
Sven Eckelmann
6e711e7ab3 mesh: Do not enable HE on 5 GHz without VHT
The commit ad9a1bfe78 ("nl80211: Share VHT channel configuration for
HE") always enforced that VHT is enabled when HE was enabled. This broke
the mesh functionality on 2.4 GHz with HE because ibss_mesh_setup_freq()
isn't setting up the VHT parameters for 2.4 GHz.

This problem was resolved for 2.4 GHz by commit df4f959988 ("nl80211:
Don't force VHT channel definition with HE"), but it is still possible
to disable VHT during the mesh/IBSS freq setup on 5 GHz - which would
result in the same problem as seen on 2.4 GHz.

The code enabling HE for IBSS/mesh must now make sure that it doesn't
enable HE when VHT could be enforced by the nl80211 driver code but
disabled by the user.

Fixes: 3459c54ac7 ("mesh: Add support for HE mode")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-08-30 16:02:23 +03:00
Sunil Dutt
e0b331d896 OWE: Update connect params with new DH attributes to the driver
A new DH public key is sent through this interface to the driver after
every successful connection/roam to a BSS. This helps to do OWE roaming
to a new BSS with drivers that implement SME/MLME operations during
roaming.

This updated DH IEs are added in the subsequent (Re)Association Request
frame sent by the station when roaming. The DH IE from the roamed AP is
given to wpa_supplicant in the roam result event. wpa_supplicant shall
further process these DH IEs to generate the PMK for the 4-way
handshake.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:31:10 +03:00
Jouni Malinen
ae05b6a215 RSN: Do not allow connection to proceed without MFPC=1 if PMF required
PMF capability check is done as part of BSS selection routines, but
those are not used when going through the enforced roaming operation
("ROAM <BSSID>" control interface command). While that mechanism is
mainly for testing purposes, extend it to do the same check for PMF to
prevent cases where forced roaming could end up disabling PMF against
the local profile requirement.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 13:48:16 +03:00
Matthew Wang
dd0153fced Check for LEAP before doing FT
According to https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html
Cisco does not support EAP-LEAP with Fast Transition. Here,
we check for LEAP before selecting FT 802.1X key management
suite.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-08-11 18:04:24 +03:00
Arend van Spriel
cb28bd52e1 nl80211: Use separate flag for 4-way handshake offload
Commit d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload
in connect") used the req_key_mgmt_offload flag to indicate to the
driver that it should offload the 802.1X handshake. However, this field
was existing and used for a different offload API. This causes
wpa_supplicant to send a connect request without the WANT_1X_HS flag and
the subsequent set-pmk is rejected causing the connection to fail. Fix
that by introducing a new flag req_handshake_offload so the offloads are
no longer entangled.

Fixes: d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload in connect")
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-08-01 15:52:48 +03:00
Eric Caruso
91b6eba773 Move MAC address randomization enable/disable to helper functions
This makes it easier to share this for D-Bus implementation.

Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-06-26 20:56:01 +03:00
Sven Eckelmann
3459c54ac7 mesh: Add support for HE mode
Mesh points can partially support HE features (when requiring no
controlling STA/AP) as long as hardware supports it. The kernel just
requires support for HE mesh and wpa_supplicant can forward the peer
capabilities to the kernel for further processing.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-06-23 18:03:51 +03:00
Sven Eckelmann
f74618cb92 wpa_supplicant: Fix type for ssid->mode comparisons
The ssid->mode is from type enum wpas_mode and all its constants start
with WPAS_MODE_*. Still some of the code sections used the
IEEE80211_MODE_* defines instead of WPAS_MODE_*.

This should have no impact on the actual code because the constants for
INFRA, IBSS, AP and MESH had the same values.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-06-23 18:03:51 +03:00
Ankita Bajaj
ef59f98729 WNM: Provide option to disable/enable BTM support in STA
Add support to disable/enable BTM support using configuration and
wpa_cli command. This is useful mainly for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-14 23:10:51 +03:00
John Crispin
88005ee98d HE: Pass in HE information into hostapd_set_freq_params()
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:33:59 +03:00
John Crispin
464dcfd030 HE: Remove VHT_ prefix from CHANWITDH_* define
The bandwidth values are shared between VHT and HE mode so remove the
VHT specific prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:27:49 +03:00
Jouni Malinen
9083ef1355 FT: Allow PMKSA caching to be enabled with FT-EAP
The new wpa_supplicant network profile configuration parameter
ft_eap_pmksa_caching=1 can be used to enable use of PMKSA caching with
FT-EAP for FT initial mobility domain association. This is still
disabled by default (i.e., maintaining previous behavior) to avoid
likely interoperability issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:01:45 +03:00
Jouni Malinen
4be17ffbd9 Replace int status/reason_code with u16 variable
These cases are for the IEEE 802.11 Status Code and Reason Code and
those fields are unsigned 16 bit values, so use the more appropriate
type consistently. This is mainly to document the uses and to make the
source code easier to understand.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-22 22:08:07 +03:00
Alex Khouderchah
cfde99a84b Add 802.11 reason code strings into wpa_supplicant messages
Logs involving IEEE 802.11 Reason Codes output the Reason Code value,
but do not provide any explanation of what the value means. This change
provides a terse explanation of each Reason Code using the latter part
of the reason code #define names.

Signed-off-by: Alex Khouderchah <akhouderchah@chromium.org>
2019-04-22 22:08:05 +03:00
Wiktor Drewniak
bce3d4f70e autoscan: Disable when we move above WPA_SCANNING state
In case of drivers that don't use wpa_supplicant as SME, autoscan
feature was never disabled.

Signed-off-by: Wiktor Drewniak <wiktor.drewniak@gmail.com>
2019-04-16 01:53:21 +03:00
Sergey Matyukevich
eb3234c07b SAE: Use open authentication to reassociate for PMKSA caching
For reassociation with the same AP wpa_supplicant attempts to use cached
PMKSA. For this purpose PMKID is passed in RSNE in (Re)Association
Request frame. In the case of SAE AP, open authentication shall be used
during reassociation. Otherwise cached PMKID becomes invalid after full
SAE authentication.

The previous implementation correctly handles SME-in-wpa_supplicant
cases. However SME-in-driver cases, complete SAE authentication is
performed. As a result, first reassociation attempt fails.

Fix SME-in-driver behavior by reseting authentication algorithm to
WPA_AUTH_ALG_OPEN when reassociating with SAE AP with an existing PMKSA
cache entry.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-04-16 01:53:21 +03:00
Ilan Peer
0a42f1eded scan: Use normal scans after connection failure
In case of connection attempt failure, set 'normal_scans'
to zero, as otherwise it is possible that scheduled scan
would be used and not normal scan, which might delay the
next connection attempt.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-04-06 17:13:10 +03:00
Ilan Peer
0487967153 OWE: Fix a possible memory leak on error path
Properly handle the case where OWE IE is allocated, but
there is no space left to add it in the WPA IE buffer.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-04-06 17:02:13 +03:00
Ankita Bajaj
822c756e8c MBO: Update connect params with new MBO attributes to driver
MBO attributes Non-preferred channel list and Cellular capabilities are
updated using WNM-Notification Request frame to the current connected
BSS. These same attributes need to be added in the (Re)Association
Request frame sent by the station when roaming, including the case where
the driver/firmware takes care of SME/MLME operations during roaming, so
we need to update the MBO IE to the driver.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-05 20:56:03 +03:00
Jouni Malinen
9af1eea37a Prefer FT-SAE over FT-PSK if both are enabled
FT-SAE is considered stronger than FT-PSK, so prefer it over FT-PSK
similarly to how SAE is preferred over WPA-PSK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-28 03:27:35 +02:00
Jouni Malinen
853bd19f22 Add more debug prints on suite selector selection
This makes it a bit easier to figure out why wpa_supplicant selects a
specific cipher/AKM for association.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-28 02:58:00 +02:00
Jouni Malinen
6d77014e71 Suite B: Prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192
If both of these AKMs are enabled in the wpa_supplicant network profile
and the target AP advertises support for both, prefer the FT version
over the non-FT version to allow FT to be used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-28 01:57:10 +02:00
Jouni Malinen
76fd782abe SAE: Reorder SAE and FT-SAE AKM selection to prefer the FT option
If a network profile has both SAE and FT-SAE enabled, SAE was previously
picked (and used incorrectly as explained in the previous commit). This
is not ideal since use of FT protocol can speed up roaming within in
mobility domain. Reorder this checks so that FT-SAE is preferred over
SAE if both are enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-26 22:50:17 +02:00
Jouni Malinen
87d8435cf9 DPP: Common configurator/bootstrapping data management
Merge the practically copy-pasted implementations in wpa_supplicant and
hostapd into a single shared implementation in dpp.c for managing
configurator and boostrapping information. This avoid unnecessary code
duplication and provides a convenient location for adding new global DPP
data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-24 17:29:45 +02:00
Jouni Malinen
10ec6a5f38 DPP2: PFS for PTK derivation
Use Diffie-Hellman key exchange to derivate additional material for
PMK-to-PTK derivation to get PFS. The Diffie-Hellman Parameter element
(defined in OWE RFC 8110) is used in association frames to exchange the
DH public keys. For backwards compatibility, ignore missing
request/response DH parameter and fall back to no PFS in such cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
dd6c598007 DPP: Support DPP and SAE in the same network profile
Make both DPP and SAE code aware of the cases where the same network
profile is configured to enable both DPP and SAE. Prefer DPP over SAE in
such cases and start DPP/SAE exchanges based on what both the station
and the AP support.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 17:29:59 +02:00
Jouni Malinen
f5db775049 Remove pending connect and sme-connect radio works on disconnect
There was a race condition in a case where a new connection attempt was
scheduled as a pending radio work and that was followed by a DISCONNECT
command before the pending radio work is started. The pending radio work
would not have been deleted in that sequence and instead, it was
executed when the radio became available next. This could result in an
unexpected connection after an explicit request to disconnect.

Fix this by removing pending connect and sme-connect radio works on
disconnection request.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 13:03:31 +02:00
Jouni Malinen
c4fccfc7a5 UBSan: Avoid memcmp(ptr, NULL, 0)
Skip the memcmp() call if ssid_len == 0 and entry->ssid might be NULL to
avoid an UBSan warning.

wpa_supplicant.c:3956:9: runtime error: null pointer passed as argument 2, which is declared to never be null

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-25 19:48:49 +02:00
Lior David
2c129a1b71 Fix cipher suite selector default value in RSNE for DMG
According to IEEE Std 802.11-2016, 9.4.2.25 when fields of an RSNE are
not included, the default values are used. The cipher suite defaults
were hardcoded to CCMP in the previous implementation, but the default
is actually different for DMG: GCMP (per 9.4.2.25.2).

It is not possible to find out from the RSNE if the network is non-DMG
or DMG, so callers of wpa_parse_wpa_ie_rsn() need to handle this case
based on context, which can be different for each caller.

In order to fix this issue, add flags to the wpa_ie_data indicating
whether pairwise/group ciphers were included in the RSNE. Callers can
check these flags and fill in the appropriate ciphers. The
wpa_parse_wpa_ie_rsn() function still initializes the ciphers to CCMP by
default so existing callers will not break. This change also fixes some
callers which need to handle the DMG network case.

Signed-off-by: Lior David <liord@codeaurora.org>
2019-02-21 12:42:24 +02:00
Jouni Malinen
bbdb501460 Note HT overrides in debug log only if set
This makes the debug log cleaner by removing the mostly confusing prints
about HT override parameters if they are not actually used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Arend van Spriel
d896874f86 nl80211: Indicate 802.1X 4-way handshake offload in connect
Upon issuing a connect request we need to indicate that we want the
driver to offload the 802.1X 4-way handshake for us. Indicate it if
the driver capability supports the offload.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Arend van Spriel
436ee2fd93 drivers: Add separate driver flags for 802.1X and PSK 4-way HS offloads
Allow drivers to indicate support for offloading 4-way handshake for
either IEEE 802.1X (WPA2-Enterprise; EAP) and/or WPA/WPA2-PSK
(WPA2-Personal) by splitting the WPA_DRIVER_FLAGS_4WAY_HANDSHAKE flag
into two separate flags.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Ben Greear
cb828507f5 Use disable_ht/vht to constrain supported operating class information
If user has disabled HT or VHT, those related operating classes
should not be advertised as supported.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-01-08 00:19:07 +02:00
Peter Oh
e5a9b1e8a3 mesh: Implement use of VHT20 config in mesh mode
Mesh in VHT mode is supposed to be able to use any bandwidth that VHT
supports, but there was no way to set VHT20 although there are
parameters that are supposed to be used. This commit along then previous
commit for VHT_CHANWIDTH_USE_HT makes mesh configuration available to
use any bandwidth with combinations of existing parameters like shown
below.

VHT80:
  default
  do not set any parameters
VHT40:
  max_oper_chwidth = 0
VHT20:
  max_oper_chwidth = 0
  disable_ht40 = 1
HT40:
  disable_vht = 1
HT20:
  disable_ht40 = 1
disable HT:
  disable_ht = 1

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:49:40 +02:00
Peter Oh
806db174fd mesh: Add VHT_CHANWIDTH_USE_HT to max_oper_chwidth
Channel width in VHT mode refers HT capability when the width goes down
to below 80 MHz, hence add checking HT channel width to its max
operation channel width. So that mesh has capability to select bandwidth
below 80 MHz.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:43:40 +02:00