Commit graph

28 commits

Author SHA1 Message Date
Jouni Malinen
6849b3de8f tests: Invalid VHT 80 and 80+80 MHz configuration (seg0/seg1)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
7e40a8812b tests: Verify SIGNAL_POLL values in ap_vht80
This confirms that the station recognized and negotiated 80 MHz
channel use with VHT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
3960585785 tests: VHT with 80 MHz channel width and local power constraint
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 20:41:55 +02:00
Jouni Malinen
29fb191cfd tests: Clear scan cache at the start of ap_vht80*
These test cases depend on the HT40 co-ex scans not swapping PRI/SEC
channels. It was possible for a test case to fail, e.g., in the
following sequence: ap_ht40_5ghz_match ap_vht80b.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 19:04:12 +02:00
Jouni Malinen
a6cc1e5747 tests: VHT with 160 MHz channel width and no DFS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-30 16:15:40 +02:00
Jouni Malinen
b6387212f5 tests: Add coverage for new vht_capab values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:00:20 +03:00
Jouni Malinen
24f4ad04f7 tests: Use different channel offset for the second 160 MHz VHT AP
This increases testing coverage a bit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:42:17 +03:00
Jouni Malinen
5161ea8e30 tests: VHT 80 MHz with different HT40 channel options
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 02:30:24 +03:00
Jouni Malinen
ee120ff381 Remove [MU-BEAMFORMEE] option from hostapd vht_capab parameter
The standard hardcodes the MU Beamformee Capable subfield is hardcoded
to 0 when transmitting by an AP, so there is no need to provide a
configuration parameter for setting this to one.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 13:41:54 +03:00
Jouni Malinen
528a7d22d0 tests: VHT/HT preference in BSS selection
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 11:47:28 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
e246d7d5b3 tests: Fix test skipping for some DFS/VHT cases
Due to a typo and missing hapd variable initialization, some of the DFS
and VHT test cases were marked as failures even though they were
supposed to be marked as skipped in case the kernel and wireless-regdb
did not have sufficient support for these modes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 13:04:11 +02:00
Jouni Malinen
496c4e45d8 tests: Subset of VHT functionality on 2.4 GHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-14 01:12:56 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Jouni Malinen
4466fe6541 tests: VHT and 40 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
9d7fdac5b3 tests: Try to clear scan results after regulatory domain changes
It was possible for regulatory domain changes to "leak" into following
test cases in number of cases where the cfg80211 BSS table remained
after regulatory domain had been restored to world roaming. Try to make
this less likely to occur by explicitly clearing BSS table at the end of
test cases that use different regulatory domain. This makes P2P test
cases that verify channel selection based on world roaming rules more
robust.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:32:01 +02:00
Jouni Malinen
c2bf6d3afc tests: SIGNAL_POLL in 160 and 80+80 MHz channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 23:37:02 +02:00
Jouni Malinen
146374019a tests: Add missing test descriptions
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
d4792c0cb7 tests: Channel switch with VHT80
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:29:28 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Jouni Malinen
74ed673f33 tests: VHT 80+80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 14:27:23 +03:00
Jouni Malinen
6259fd814b tests: VHT with 160 MHz channel width
Since this requires a recent CRDA version and updated wireless-regdb, do
not report failures yet (i.e., indicate that the test case was skipped
if AP startup fails).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:18:39 +03:00
Jouni Malinen
6acecce1fe tests: hostapd configuration parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 18:07:05 +03:00
Jouni Malinen
fdc02e4caf tests: Require HT/VHT as BSS membership selector in Supp Rates
These are similar to the previous cases, but with supported rate set
limited to allow the BSS membership selector to fit into that element
instead of Ext Supp Rates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 10:39:32 +02:00
Jouni Malinen
145f35bf30 tests: Verify HT/VHT required rejection
Previously, only the case of STA supporting HT/VHT was tested. Now both
cases are verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:49:12 +02:00
Johannes Berg
ea7526bfb3 tests: Verify VHT20 with center freq seq0 set to zero
This was found through a mac80211 bug which didn't correctly accept a
center segment 0 value of zero, so the test will fail until the mac80211
bug is fixed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-14 17:07:18 +02:00
Jouni Malinen
a4292b3f3b tests: require_vht=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 23:17:04 +02:00
Jouni Malinen
7cd0aa7ea8 tests: VHT functionality
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 22:39:18 +02:00