Commit graph

14446 commits

Author SHA1 Message Date
Lubomir Rintel
d7591aab85 dbus: Expose availability of SHA384 on D-Bus
This lets us know whether we can attempt to use FT-EAP-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
eb7e747931 dbus: Expose availability of FT on D-Bus
This lets us know whether we can attempt to use FT-PSK, FT-EAP,
FT-EAP-SHA384, FT-FILS-SHA256 or FT-FILS-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
8b67f6496e tests: D-Bus Get/Set Pmf
Based on Jouni Malinen's [76055b4c6 "tests: D-Bus Get/Set Pmf"], modified
to use the correct "s" signature for the "Pmf" property.

Removed the negative test cases, because the synthesized property doens't
seem to do error checking upon being set.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:04:20 +02:00
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Lubomir Rintel
b8d8928f6c Revert "tests: D-Bus Get/Set Pmf"
This is wrong. The Pmf property has a "s" signature.

This reverts commit 76055b4c61.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Jouni Malinen
4929d556cc mesh: Add Category and Action field to maximum buffer length
Make the buf_len calculation match more closely with the following
wpa_buf*() operations. The extra room from the existing elements was
apparently sufficiently large to cover this, but better add the two
octet header explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-24 13:36:54 +02:00
Bob Copeland
25778502d5 mesh: Fix off-by-one in buf length calculation
The maximum size of a Mesh Peering Management element in the case
of an AMPE close frame is actually 24 bytes, not 23 bytes, plus the
two bytes of the IE header (IEEE Std 802.11-2016, 9.4.2.102). Found by
inspection.

The other buffer components seem to use large enough extra room in their
allocations to avoid hitting issues with the full buffer size even
without this fix.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
2018-11-24 13:30:28 +02:00
Davide Caratti
2b7f46f1c7 examples: Fix shellcheck warnings in wps-ap-cli
use 'printf' instead of 'echo -n', to suppress the following warning:

In POSIX sh, echo flags are undefined. [SC2039]

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2018-11-22 15:53:30 +02:00
Andrei Otcheretianski
79bbafd78c tests: Store the correct PID in hostapd-test.pid file
The hwsim's start.sh script spawns hostapd process using "sudo".
Since sudo forks a child process, $! holds the pid of sudo itself.
Fix that by storing the PID of the child process instead.
Since in VM "sudo" is replaced with a dummy script, pass an additional
argument to run-all.sh and start.sh scripts to indicate that they are
running inside a VM.

This is needed to fix ap_config_reload and ap_config_reload_file test
cases on some platforms where sudo is apparently not relaying the
signals properly.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-11-22 15:53:30 +02:00
Ayala Beker
fcc65290d4 tests: Fix ap_acl_deny test
In ap_acl_deny test, the AP doesn't send probe responses during scan due
to ACL reject. As the result, dev[0] might miss the AP's Beacon frame
because the dwell time is too short. Make the test more robust and
trigger passive scan, and by that increase the probability of hearing
the AP.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2018-11-22 15:53:30 +02:00
Johannes Berg
babdd8d0d9 nl80211: Use correct u8 size for NL80211_ATTR_SMPS_MODE
Back in December 2017, Jouni fixed the output side since that was
causing a kernel message to be printed, but the input side should
also be fixed, otherwise it will not work correctly on big-endian
platforms.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-22 15:53:30 +02:00
Damodaran, Rohit (Contractor)
cd676ae34c Fix dpp_configurator_get_key command name in hostapd_cli
The option to get DPP configurator key in hostapd_cli was named
incorrectly. It was wrongly pointing to dpp_configurator_remove. Fix
this by using the correct name.

Signed-off-by: Rohit Damodaran <Rohit_Damodaran@comcast.com>
2018-11-22 15:53:26 +02:00
Jouni Malinen
adbce7443d HS 2.0: Update HS2.0 AP version RADIUS attribute Version field
Use HS20_VERSION macro to determine if R3 should be indicated instead of
R2.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 23:38:31 +02:00
Jouni Malinen
524b963c6c tests: Mark OSU BSS explicitly in sigma_dut_ap_hs20
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:10:28 +02:00
Jouni Malinen
db368b2e13 tests: ap_hs20_osen to test group cipher selection in SME case
Go through the group cipher selection in both the wpa_supplicant and
driver SME cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:09:34 +02:00
Jouni Malinen
dc673aec46 HS 2.0: Generate AssocReq OSEN IE based on AP advertisement
Parse the OSEN IE from the AP to determine values used in the AssocReq
instead of using hardcoded cipher suites. This is needed to be able to
set the group cipher based on AP advertisement now that two possible
options exists for this (GTK_NOT_USED in separate OSEN BSS; CCMP or
GTK_NOT_USED in shared BSS case). Furthermore, this is a step towards
allowing other ciphers than CCMP to be used with OSEN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:07:16 +02:00
Sachin Ahuja
d554402140 Define new QCA vendor command for coex priority config
Add QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG vendor command
to set the priorities among different types of traffic of
WLAN/BT/Zigbee during coex scenarios.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 00:20:09 +02:00
vamsi krishna
a626fb1070 Add QCA vendor event to indicate throughput changes
Add interface for drivers to report changes in TX/RX throughput
dynamically to user space. This information can be used by userspace
tools to tune kernel's TCP parameters in order to achieve peak
throughput. The driver may optionally provide guidance on which TCP
parameters to be configured for optimal performance along with the
values to be configured.

The TCP parameters that need to be tuned for peak performance are not
interface specific. Based on the guidance from the driver and
considering the other interfaces that may be affected with the new
configurations, a userspace tool has to choose the values to be
configured for these parameters to achieve optimal performance across
interfaces.

The throughput levels informed by the driver with this event are only
for providing guidance on TCP parameter tuning from userspace. The
driver may change the thresholds used to decide low or medium or high
throughput levels based on several parameters based on the PHY layer
capacity in the current connection, the number of packets being
dispatched per second, or the number of packets pending in queues, etc.
The throughput levels may not be consistent with the actual throughput
of the link.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-08 21:56:58 +02:00
Jouni Malinen
b583907b53 tests: Use more correct OSU_METHOD value in sigma_dut_ap_hs20
The OSU Providers List includes two providers, so there should be two
OSU_METHOD values listed just like there was two OSU_SERVER_URI URLs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-06 02:04:09 +02:00
Jouni Malinen
4902eb04b1 tests: Use bridge in sigma_dut_ap_eap_osen
This is needed to allow sigma_dut to enable ap_isolate=1. In addition,
verify that the two associated STAs with RSN(EAP) and OSEN cannot
exchange frames between them.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-06 00:46:23 +02:00
Kiran Kumar Lokere
5d332a13f7 Add test config QCA vendor attribute for action frame Tx in TB PPDU
Add a new wifi test config QCA vendor attribute to configure action
frame transmission in HE trigger based PPDU.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:10:18 +02:00
Kiran Kumar Lokere
a94aab6ddd Define test config QCA vendor attribute for HE SU PPDU Tx config
Add a new wifi test config QCA vendor attribute to configure HE
single user PPDU transmission.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:38 +02:00
Kiran Kumar Lokere
292bce08b3 Define test config QCA vendor attribute for HE OM control config
Add a new wifi test config QCA vendor attributes to configure HE
operating mode control field bandwidth, number of spatial streams, and
UL MU disable configuration. Define a new attribute to clear the
previously set HE OM control field configuration. This is used for
testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:22 +02:00
Jouni Malinen
e7869a664a tests: sigma_dut AP configuration for Hotspot 2.0
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-01 17:10:40 +02:00
Jouni Malinen
ab3ab50757 HS 2.0: Fix Terms and Conditions URL handling
Do not try to determine the length of the T&C Server URL before checking
that the URL is available. This got broken in a change to move the
handling to the AS. hostapd could potentially have hit a NULL pointer
dereference if the authentication server sent an unconsistent set of T&C
information.

Fixes: d4e39c51f8 ("HS 2.0: Move Terms and Conditions Server URL generation from AP to AS")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 19:15:11 +02:00
Ankita Bajaj
0f0aa2a640 OCE: Move OCE checks to IE formation from hostapd initialization
Earlier, the OCE flags were checked during hostapd initialization. This
doesn't address few cases like for example when the interface is added
from control interface. Move the OCE flag checks to the functions that
are forming the MBO/OCE IEs to cover all the different paths for
enabling a BSS. Also use macros as appropriate for readability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 15:43:01 +02:00
Jouni Malinen
1695b4dc37 HS 2.0: Do not require devinfo.xml for all hs20-osu-client operations
hs20-osu-client refused to do anything if it could not find devinfo.xml
from the current working directory. This is a bit excessive since that
file was used in init_ctx() only to fill in ctx->devid which is used
when constructing OMA DM messages.

Move the check for ctx->devid into OMA DM specific code so that other
hs20-osu-client functionality can be used without the devinfo.xml file.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 15:29:12 +02:00
Jouni Malinen
21895884ea tests: WNM Collocated Interference Reporting
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Peng Xu
224eddb03b nl80211: Read reg-domain information from a specific wiphy
If driver supports self-managed regulatory domain, read reg-domain
information for that specific wiphy interface instead the global
information which may be different which such drivers. This fixes issues
where a regulatory update with a self-managed regulatory domain driver
ended up building incorrect list of supported channels for upper layer
hostapd/wpa_supplicant operations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-24 18:36:34 +03:00
Peng Xu
8aa4d5521c nl80211: Add support for self-managed regulatory device
Add a flag indicating if the device has the self-managed regulatory
support. Set the flag if NL80211_ATTR_WIPHY_SELF_MANAGED_REG attribute
is set when reading wiphy info.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-24 18:34:31 +03:00
Karol Babioch
ac1f591567 Enable the close-on-exec flag for the debug log file descriptor
On Linux this flag will make sure that no file descriptor is
accidentally leaked into potential child processes. While this is not a
problem right now, it is considered to be good practice these days when
dealing with file descriptors on Linux.

Signed-off-by: Karol Babioch <karol@babioch.de>
2018-10-20 19:26:03 +03:00
Karol Babioch
1737eb3982 Create debug log file with more sane file permissions
Previously the file permissions for the debug log file were not
explicitly set. Instead it was implicitly relying on a secure umask,
which in most cases would result in a file that is world-readable. This
is a violation of good practices, since not every user should have
access to sensitive information that might be contained in the debug log
file.

Explicitly set sane default file permissions in case the file is newly
created.

Unfortunately the fopen(3) function does not provide such a facility, so
the approach needs to be changed in the following way:

1) The file descriptor needs to be created manually using the open(3)
function with the correct flags and the desired mode set.

2) fdopen(3) can then be used on the file descriptor to associate a file
stream with it.

Note: This modification will not change the file permissions of any
already existing debug log files, and only applies to newly created
ones.

Signed-off-by: Karol Babioch <karol@babioch.de>
2018-10-20 19:15:54 +03:00
Andrei Otcheretianski
1d914d01d8 tests: Make autogo_interworking test more robust
P2P related configuration should be done on a global control interface.
This way this test can be reused also when a dedicated P2P device
interface is used.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-20 11:33:07 +03:00
Ilan Peer
f13aaf33fb AP: Place the WPA IE in the correct order
In case the protocol used for the BSS is WPA, the WPA vendor IE should
be placed after all the non vendor IEs. Fix this for Beacon and Probe
Response frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-20 11:28:29 +03:00
Ilan Peer
170244a1cd SME: Fix order of WPA IE in association request
In case that the protocol used for association is WPA the WPA IE was
inserted before other (non vendor specific) IEs. This is not in
accordance to the standard that states that vendor IEs should be placed
after all the non vendor IEs are placed. In addition, this would cause
the low layers to fail to properly order information elements.

To fix this, if the protocol used is WPA, store the WPA IE and reinsert
it after all the non vendor specific IEs were placed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-20 11:26:13 +03:00
Jouni Malinen
c3da381526 tests: AP Channel Switch and DISABLE command before completion
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 21:26:03 +03:00
Sriram R
7b2ca5cf0d hostapd: Reset channel switch parameters on interface disable
Previously, when an AP interface was disabled through a control
interface DISABLE command during a channel switch window, the interface
could not be reenabled due to beacon setup failure (which validates if
CSA is in progress).

Fix this by clearing channel switch parameters while disabling the
hostapd interface.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
2018-10-19 21:26:03 +03:00
Peng Xu
2f186d598a Define vendor specific NDP attribute for peer NDPE support
Add NAN NDP attribute QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT which
indicates if NDP remote peer supports NDPE attribute or not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 20:44:44 +03:00
Jouni Malinen
ba7d3fe920 HS 2.0: Record policy update into users table
This makes it easier to track whether a policy update has been
successfully completed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 19:00:37 +03:00
Jouni Malinen
4939e2bb97 HS 2.0: Rename PPS/Credential1 node to Cred01
This makes it a bit easier to use existing hardcoded PPS MO files for
testing purposes when the subscription remediation and policy update
operations target the same path.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 18:07:37 +03:00
Jouni Malinen
950cafafb2 HS 2.0: Fix SubscriptionUpdate UpdateMethod value in OSU server
This node was modified long time ago to include "SPP-" prefix. Fix the
OSU server implementation to use the correct value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 18:00:02 +03:00
Jouni Malinen
55e5084d9e HS 2.0: OSU server test functionality for incorrect behavior (policy)
Extend test=<value> special incorrect behavior testing capabilities in
the OSU server to include the fingerprint of the policy update trust
root: test=corrupt_polupd_hash.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 17:57:39 +03:00
Jouni Malinen
a9574f0f99 HS 2.0: OSU server test functionality for incorrect behavior
Add a mechanism to allow special incorrect behavior to be requested from
OSU server by adding an optional parameter test=<value> to the initial
signup URL. This is for protocol testing purposes for the OSU client.

This commit adds two special behavior cases: corrupt_aaa_hash and
corrupt_subrem_hash. These can be used to generate PPS MO with invalid
CertSHA256Fingerprint values for AAAServerTrustRoot and
SubscriptionUpdate nodes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-17 19:08:12 +03:00
Jouni Malinen
de7bcb9bc9 HS 2.0: Reject PPS MO if polupd or AAA trust root is invalid
Previously, this was done only for the subscription remediation/update
trust root. The other downloaded files were also verified, but the OSU
server was not notified if the files were found to be invalid.

Modify hs20-osu-client behavior to explicitly notify the OSU server if
any of the three trust root types cannot be successfully downloaded.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-17 19:07:27 +03:00
Jouni Malinen
2cbaf0de22 tests: Work around tshark bug in wpas_mesh_max_peering
It looks like tshark parser was broken at some point for
wlan.mesh.config.cap which is now (tshark 2.6.3) pointing to incorrect
field (same as wlan.mesh.config.ps_protocol). This used to work with
tshark 2.2.6.

For now, assume the capability field ends up being the last octet of the
frame.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-17 12:33:11 +03:00
Jouni Malinen
e384b156dc tests: Update tshark wlan_mgmt compatibility code for new version
It looks like at least tshark 2.6.3 uses a different error message for
unknown display filter fields:
tshark: Neither "wlan_mgt.fixed.category_code" nor "4" are field or protocol names.
and a different status exit code (2 instead of 1).

Add a new handler for this combination to allow automatic wlan_mgt to
wlan conversion to happen.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-10-16 18:21:07 +03:00
Andrei Otcheretianski
68500d8159 AP: Warn about VLAN interface name truncations
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:56:04 +03:00
Andrei Otcheretianski
d577f7f3d5 nl80211: Warn about interface name truncations
This is something useful to know and also eliminates format truncation
warnings.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:53:15 +03:00
Andrei Otcheretianski
16b5413f2b tests: Make ap_reconnect_auth_timeout test more robust
This test starts two identical APs and assumes a connection to the first
one, though it is not necessary true. Fix that by starting the second AP
only after the connection is established.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:49:11 +03:00