diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index 44c92b5a5..233d0e3dc 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -338,6 +338,22 @@ enum qca_radiotap_vendor_ids { * information indicating the reason that triggered this detection. The * attributes for this command are defined in * enum qca_wlan_vendor_attr_hang. + * + * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values + * of spectral parameters used. The spectral scan parameters are specified + * by enum qca_wlan_vendor_attr_spectral_scan. + * + * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats + * for spectral scan functionality. The debug stats are specified by + * enum qca_wlan_vendor_attr_spectral_diag_stats. + * + * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral + * scan system capabilities. The capabilities are specified + * by enum qca_wlan_vendor_attr_spectral_cap. + * + * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current + * status of spectral scan. The status values are specified + * by enum qca_wlan_vendor_attr_spectral_scan_status. */ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, @@ -470,6 +486,10 @@ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155, QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156, QCA_NL80211_VENDOR_SUBCMD_HANG = 157, + QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158, + QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159, + QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160, + QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161, }; @@ -3904,12 +3924,118 @@ enum qca_wlan_vendor_attr_spectral_scan { * specific scan to be stopped. */ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19, + /* Skip interval for FFT reports. u32 attribute */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20, + /* Set to report only one set of FFT results. + * u32 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21, + /* Debug level for spectral module in driver. + * 0 : Verbosity level 0 + * 1 : Verbosity level 1 + * 2 : Verbosity level 2 + * 3 : Matched filterID display + * 4 : One time dump of FFT report + * u32 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22, + /* Type of spectral scan request. u32 attribute. + * It uses values defined in enum + * qca_wlan_vendor_attr_spectral_scan_request_type. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23, QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST, QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX = QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1, }; +/** + * enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command + * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS. + */ +enum qca_wlan_vendor_attr_spectral_diag_stats { + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0, + /* Number of spectral TLV signature mismatches. + * u64 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1, + /* Number of spectral phyerror events with insufficient length when + * parsing for secondary 80 search FFT report. u64 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2, + /* Number of spectral phyerror events without secondary 80 + * search FFT report. u64 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3, + /* Number of spectral phyerror events with vht operation segment 1 id + * mismatches in search fft report. u64 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4, + /* Number of spectral phyerror events with vht operation segment 2 id + * mismatches in search fft report. u64 attribute. + */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5, + + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX = + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1, +}; + +/** + * enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command + * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. + */ +enum qca_wlan_vendor_attr_spectral_cap { + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0, + /* Flag attribute to indicate phydiag capability */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1, + /* Flag attribute to indicate radar detection capability */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2, + /* Flag attribute to indicate spectral capability */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3, + /* Flag attribute to indicate advanced spectral capability */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4, + + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX = + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1, +}; + +/** + * enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command + * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. + */ +enum qca_wlan_vendor_attr_spectral_scan_status { + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0, + /* Flag attribute to indicate whether spectral scan is enabled */ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1, + /* Flag attribute to indicate whether spectral scan is in progress*/ + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2, + + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX = + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1, +}; + +/** + * qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for + * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd + * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the + * spectral scan request types. + * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to + * set the spectral parameters and start scan. + * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to + * only set the spectral parameters. + * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to + * only start the spectral scan. + */ +enum qca_wlan_vendor_attr_spectral_scan_request_type { + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG, + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN, + QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG, +}; + enum qca_wlan_vendor_tos { QCA_WLAN_VENDOR_TOS_BK = 0, QCA_WLAN_VENDOR_TOS_BE = 1,