QCA vendor command for adding and deleting TSPEC
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC to add and delete TSPEC in STA mode. The attributes defined in enum qca_wlan_vendor_attr_config_tspec are used to encapsulate required information. Signed-off-by: Min Liu <minliu@codeaurora.org>
This commit is contained in:
Min Liu
Jouni Malinen
parent
82867456e9
commit
f7a904a283
|
|
@ -646,6 +646,12 @@ enum qca_radiotap_vendor_ids {
|
|||
* code immediately prior to triggering cfg80211_disconnected(). The
|
||||
* attributes used with this event are defined in enum
|
||||
* qca_wlan_vendor_attr_driver_disconnect_reason.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC: This vendor subcommand is used to
|
||||
* add/delete TSPEC for each AC. One command is for one specific AC only.
|
||||
* This command can only be used in STA mode and the STA must be
|
||||
* associated with an AP when the command is issued. Uses attributes
|
||||
* defined in enum qca_wlan_vendor_attr_config_tspec.
|
||||
*/
|
||||
enum qca_nl80211_vendor_subcmds {
|
||||
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
|
||||
|
|
@ -825,6 +831,7 @@ enum qca_nl80211_vendor_subcmds {
|
|||
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
|
||||
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
|
||||
QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
|
||||
QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC = 190,
|
||||
};
|
||||
|
||||
enum qca_wlan_vendor_attr {
|
||||
|
|
@ -8927,4 +8934,172 @@ enum qca_wlan_vendor_attr_driver_disconnect_reason {
|
|||
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_tspec_operation - Operation of the config TSPEC request
|
||||
*
|
||||
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION.
|
||||
*/
|
||||
enum qca_wlan_tspec_operation {
|
||||
QCA_WLAN_TSPEC_ADD = 0,
|
||||
QCA_WLAN_TSPEC_DEL = 1,
|
||||
QCA_WLAN_TSPEC_GET = 2,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_tspec_direction - Direction in TSPEC
|
||||
* As what is defined in IEEE Std 802.11-2016, Table 9-139.
|
||||
*
|
||||
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION.
|
||||
*/
|
||||
enum qca_wlan_tspec_direction {
|
||||
QCA_WLAN_TSPEC_DIRECTION_UPLINK = 0,
|
||||
QCA_WLAN_TSPEC_DIRECTION_DOWNLINK = 1,
|
||||
QCA_WLAN_TSPEC_DIRECTION_DIRECT = 2,
|
||||
QCA_WLAN_TSPEC_DIRECTION_BOTH = 3,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_tspec_ack_policy - MAC acknowledgement policy in TSPEC
|
||||
* As what is defined in IEEE Std 802.11-201, Table 9-141.
|
||||
*
|
||||
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY.
|
||||
*/
|
||||
enum qca_wlan_tspec_ack_policy {
|
||||
QCA_WLAN_TSPEC_NORMAL_ACK = 0,
|
||||
QCA_WLAN_TSPEC_NO_ACK = 1,
|
||||
/* Reserved */
|
||||
QCA_WLAN_TSPEC_BLOCK_ACK = 3,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_config_tspec - Defines attributes
|
||||
* used by %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC vendor command.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION:
|
||||
* u8 attribute. Specify the TSPEC operation of this request. Possible values
|
||||
* are defined in enum qca_wlan_tspec_operation.
|
||||
* Mandatory attribute for all kinds of config TSPEC requests.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID:
|
||||
* u8 attribute. TS ID. Possible values are 0-7.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD, QCA_WLAN_TSPEC_DEL,
|
||||
* QCA_WLAN_TSPEC_GET. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION:
|
||||
* u8 attribute. Direction of data carried by the TS. Possible values are
|
||||
* defined in enum qca_wlan_tspec_direction.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD:
|
||||
* Flag attribute. Indicate whether APSD is enabled for the traffic associated
|
||||
* with the TS. set - enabled, not set - disabled.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY:
|
||||
* u8 attribute. User priority to be used for the transport of MSDUs/A-MSDUs
|
||||
* belonging to this TS. Possible values are 0-7.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY:
|
||||
* u8 attribute. Indicate whether MAC acknowledgements are required for
|
||||
* MPDUs/A-MSDUs belonging to this TS and the form of those acknowledgements.
|
||||
* Possible values are defined in enum qca_wlan_tspec_ack_policy.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE:
|
||||
* u16 attribute. Specify the nominal size in bytes of MSDUs/A-MSDUs
|
||||
* belonging to this TS.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE:
|
||||
* u16 attribute. Specify the maximum size in bytes of MSDUs/A-MSDUs
|
||||
* belonging to this TS.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL:
|
||||
* u32 attribute. Specify the minimum interval in microseconds between the
|
||||
* start of two successive SPs.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL:
|
||||
* u32 attribute. Specify the maximum interval in microseconds between the
|
||||
* start of two successive SPs.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL:
|
||||
* u32 attribute. Specify the minimum interval in microseconds that can elapse
|
||||
* without arrival or transfer of an MPDU belonging to the TS before this TS
|
||||
* is deleted by the MAC entity at the HC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL:
|
||||
* u32 attribute. Specify the minimum interval in microseconds that can elapse
|
||||
* without arrival or transfer of an MSDU belonging to the TS before the
|
||||
* generation of successive QoS(+)CF-Poll is stopped for this TS. A value of
|
||||
* 0xFFFFFFFF disables the suspension interval. The value of the suspension
|
||||
* interval is always less than or equal to the inactivity interval.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE:
|
||||
* u32 attribute. Indicate the lowest data rate in bps specified at the MAC
|
||||
* SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
|
||||
* bounds of this TSPEC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE:
|
||||
* u32 attribute. Indicate the average data rate in bps specified at the MAC
|
||||
* SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
|
||||
* bounds of this TSPEC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE:
|
||||
* u32 attribute. Indicate the maximum allowable data rate in bps specified at
|
||||
* the MAC SAP for transport of MSDUs or A-MSDUs belonging to this TS within
|
||||
* the bounds of this TSPEC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE:
|
||||
* u32 attribute. Specify the maximum burst size in bytes of the MSDUs/A-MSDUs
|
||||
* belonging to this TS that arrive at the MAC SAP at the peak data rate. A
|
||||
* value of 0 indicates that there are no bursts.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE:
|
||||
* u32 attribute. Indicate the minimum PHY rate in bps for transport of
|
||||
* MSDUs/A-MSDUs belonging to this TS within the bounds of this TSPEC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE:
|
||||
* u16 attribute. Specify the excess allocation of time (and bandwidth) over
|
||||
* and above the stated application rates required to transport an MSDU/A-MSDU
|
||||
* belonging to the TS in this TSPEC.
|
||||
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_config_tspec {
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INVALID = 0,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION = 1,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID = 2,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION = 3,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD = 4,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY = 5,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY = 6,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE = 7,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE = 8,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL = 9,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL = 10,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL = 11,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL = 12,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE = 13,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE = 14,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE = 15,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE = 16,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE = 17,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE = 18,
|
||||
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
#endif /* QCA_VENDOR_H */
|
||||
|
|
|
|||
Loading…
Reference in New Issue