SME: Add timers for authentication and asscoiation

mac80211 authentication or association operation may get stuck for some
reasons, so wpa_supplicant better use an internal timer to recover from
this.

Signed-off-by: Ben Greear <greearb@candelatech.com>
This commit is contained in:
Ben Greear 2011-02-24 16:59:46 +02:00 committed by Jouni Malinen
parent effab86ff2
commit e29853bbff
5 changed files with 136 additions and 41 deletions

View file

@ -699,13 +699,20 @@ void wpa_supplicant_connect(struct wpa_supplicant *wpa_s,
*/
if (wpa_s->reassociate ||
(os_memcmp(selected->bssid, wpa_s->bssid, ETH_ALEN) != 0 &&
(wpa_s->wpa_state != WPA_ASSOCIATING ||
((wpa_s->wpa_state != WPA_ASSOCIATING &&
wpa_s->wpa_state != WPA_AUTHENTICATING) ||
os_memcmp(selected->bssid, wpa_s->pending_bssid, ETH_ALEN) !=
0))) {
if (wpa_supplicant_scard_init(wpa_s, ssid)) {
wpa_supplicant_req_new_scan(wpa_s, 10, 0);
return;
}
wpa_msg(wpa_s, MSG_DEBUG, "Request association: "
"reassociate: %d selected: "MACSTR " bssid: " MACSTR
" pending: " MACSTR " wpa_state: %s",
wpa_s->reassociate, MAC2STR(selected->bssid),
MAC2STR(wpa_s->bssid), MAC2STR(wpa_s->pending_bssid),
wpa_supplicant_state_txt(wpa_s->wpa_state));
wpa_supplicant_associate(wpa_s, selected, ssid);
} else {
wpa_dbg(wpa_s, MSG_DEBUG, "Already associated with the "
@ -1356,13 +1363,11 @@ static void wpa_supplicant_event_disassoc(struct wpa_supplicant *wpa_s,
u16 reason_code)
{
const u8 *bssid;
#ifdef CONFIG_SME
int authenticating;
u8 prev_pending_bssid[ETH_ALEN];
authenticating = wpa_s->wpa_state == WPA_AUTHENTICATING;
os_memcpy(prev_pending_bssid, wpa_s->pending_bssid, ETH_ALEN);
#endif /* CONFIG_SME */
if (wpa_s->key_mgmt == WPA_KEY_MGMT_WPA_NONE) {
/*
@ -1409,20 +1414,9 @@ static void wpa_supplicant_event_disassoc(struct wpa_supplicant *wpa_s,
wpa_supplicant_mark_disassoc(wpa_s);
bgscan_deinit(wpa_s);
wpa_s->bgscan_ssid = NULL;
#ifdef CONFIG_SME
if (authenticating &&
(wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME)) {
/*
* mac80211-workaround to force deauth on failed auth cmd,
* requires us to remain in authenticating state to allow the
* second authentication attempt to be continued properly.
*/
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
"to proceed after disconnection event");
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);
}
#endif /* CONFIG_SME */
if (authenticating && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME))
sme_disassoc_while_authenticating(wpa_s, prev_pending_bssid);
}

View file

@ -25,6 +25,7 @@
#include "driver_i.h"
#include "scan.h"
#include "p2p_supplicant.h"
#include "sme.h"
#include "notify.h"
int wpas_notify_supplicant_initialized(struct wpa_global *global)
@ -89,6 +90,8 @@ void wpas_notify_state_changed(struct wpa_supplicant *wpa_s,
else if (new_state < WPA_ASSOCIATED)
wpas_p2p_notif_disconnected(wpa_s);
#endif /* CONFIG_P2P */
sme_state_changed(wpa_s);
}

View file

@ -34,6 +34,16 @@
#include "scan.h"
#include "sme.h"
#define SME_AUTH_TIMEOUT 5
#define SME_ASSOC_TIMEOUT 5
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx);
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx);
#ifdef CONFIG_IEEE80211W
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
#endif /* CONFIG_IEEE80211W */
void sme_authenticate(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss, struct wpa_ssid *ssid)
{
@ -250,7 +260,8 @@ void sme_authenticate(struct wpa_supplicant *wpa_s,
return;
}
/* TODO: add timeout on authentication */
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
NULL);
/*
* Association will be started based on the authentication event from
@ -289,6 +300,8 @@ void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data)
wpa_hexdump(MSG_MSGDUMP, "SME: Authentication response IEs",
data->auth.ies, data->auth.ies_len);
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
if (data->auth.status_code != WLAN_STATUS_SUCCESS) {
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication failed (status "
"code %d)", data->auth.status_code);
@ -404,7 +417,8 @@ void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
return;
}
/* TODO: add timeout on association */
eloop_register_timeout(SME_ASSOC_TIMEOUT, 0, sme_assoc_timer, wpa_s,
NULL);
}
@ -432,24 +446,12 @@ int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
}
void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
static void sme_deauth(struct wpa_supplicant *wpa_s)
{
int bssid_changed;
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
"status code %d", MAC2STR(wpa_s->pending_bssid),
data->assoc_reject.status_code);
bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
/*
* For now, unconditionally terminate the previous authentication. In
* theory, this should not be needed, but mac80211 gets quite confused
* if the authentication is left pending.. Some roaming cases might
* benefit from using the previous authentication, so this could be
* optimized in the future.
*/
if (wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
WLAN_REASON_DEAUTH_LEAVING) < 0) {
wpa_msg(wpa_s, MSG_INFO, "SME: Deauth request to the driver "
@ -466,6 +468,26 @@ void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
}
void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
{
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
"status code %d", MAC2STR(wpa_s->pending_bssid),
data->assoc_reject.status_code);
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
/*
* For now, unconditionally terminate the previous authentication. In
* theory, this should not be needed, but mac80211 gets quite confused
* if the authentication is left pending.. Some roaming cases might
* benefit from using the previous authentication, so this could be
* optimized in the future.
*/
sme_deauth(wpa_s);
}
void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
union wpa_event_data *data)
{
@ -503,6 +525,72 @@ void sme_event_disassoc(struct wpa_supplicant *wpa_s,
}
static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
if (wpa_s->wpa_state == WPA_AUTHENTICATING) {
wpa_msg(wpa_s, MSG_DEBUG, "SME: Authentication timeout");
sme_deauth(wpa_s);
}
}
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
if (wpa_s->wpa_state == WPA_ASSOCIATING) {
wpa_msg(wpa_s, MSG_DEBUG, "SME: Association timeout");
sme_deauth(wpa_s);
}
}
void sme_state_changed(struct wpa_supplicant *wpa_s)
{
/* Make sure timers are cleaned up appropriately. */
if (wpa_s->wpa_state != WPA_ASSOCIATING)
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
if (wpa_s->wpa_state != WPA_AUTHENTICATING)
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
}
void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
const u8 *prev_pending_bssid)
{
/*
* mac80211-workaround to force deauth on failed auth cmd,
* requires us to remain in authenticating state to allow the
* second authentication attempt to be continued properly.
*/
wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
"to proceed after disconnection event");
wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);
/*
* Re-arm authentication timer in case auth fails for whatever reason.
*/
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
NULL);
}
void sme_deinit(struct wpa_supplicant *wpa_s)
{
os_free(wpa_s->sme.ft_ies);
wpa_s->sme.ft_ies = NULL;
wpa_s->sme.ft_ies_len = 0;
#ifdef CONFIG_IEEE80211W
sme_stop_sa_query(wpa_s);
#endif /* CONFIG_IEEE80211W */
eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
}
#ifdef CONFIG_IEEE80211W
static const unsigned int sa_query_max_timeout = 1000;

View file

@ -34,9 +34,12 @@ void sme_event_disassoc(struct wpa_supplicant *wpa_s,
union wpa_event_data *data);
void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
const u8 *da, u16 reason_code);
void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *sa,
const u8 *data, size_t len);
void sme_state_changed(struct wpa_supplicant *wpa_s);
void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
const u8 *prev_pending_bssid);
void sme_deinit(struct wpa_supplicant *wpa_s);
#else /* CONFIG_SME */
@ -84,6 +87,20 @@ static inline void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s,
{
}
static inline void sme_state_changed(struct wpa_supplicant *wpa_s)
{
}
static inline void
sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
const u8 *prev_pending_bssid)
{
}
static inline void sme_deinit(struct wpa_supplicant *wpa_s)
{
}
#endif /* CONFIG_SME */
#endif /* SME_H */

View file

@ -419,14 +419,7 @@ static void wpa_supplicant_cleanup(struct wpa_supplicant *wpa_s)
wpa_s->ibss_rsn = NULL;
#endif /* CONFIG_IBSS_RSN */
#ifdef CONFIG_SME
os_free(wpa_s->sme.ft_ies);
wpa_s->sme.ft_ies = NULL;
wpa_s->sme.ft_ies_len = 0;
#ifdef CONFIG_IEEE80211W
sme_stop_sa_query(wpa_s);
#endif /* CONFIG_IEEE80211W */
#endif /* CONFIG_SME */
sme_deinit(wpa_s);
#ifdef CONFIG_AP
wpa_supplicant_ap_deinit(wpa_s);