nl80211: Add support for full station state operations

This provides means for determining whether the driver supports full AP
station state and setting the needed STA flags for using this
functionality.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
This commit is contained in:
Ayala Beker 2016-02-16 11:54:31 +02:00 committed by Jouni Malinen
parent bccd22f356
commit dc55b6b672
3 changed files with 75 additions and 7 deletions

View file

@ -1260,8 +1260,13 @@ struct wpa_driver_capa {
#define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL #define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL
/** Driver supports simultaneous off-channel operations */ /** Driver supports simultaneous off-channel operations */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL #define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL
/** Driver supports full AP client state */
#define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL
u64 flags; u64 flags;
#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
(drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE)
#define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001 #define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001
#define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002 #define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002
unsigned int smps_modes; unsigned int smps_modes;
@ -1508,6 +1513,7 @@ struct wpa_bss_params {
#define WPA_STA_MFP BIT(3) #define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4) #define WPA_STA_TDLS_PEER BIT(4)
#define WPA_STA_AUTHENTICATED BIT(5) #define WPA_STA_AUTHENTICATED BIT(5)
#define WPA_STA_ASSOCIATED BIT(6)
enum tdls_oper { enum tdls_oper {
TDLS_DISCOVERY_REQ, TDLS_DISCOVERY_REQ,
@ -2369,12 +2375,17 @@ struct wpa_driver_ops {
* @params: Station parameters * @params: Station parameters
* Returns: 0 on success, -1 on failure * Returns: 0 on success, -1 on failure
* *
* This function is used to add a station entry to the driver once the * This function is used to add or set (params->set 1) a station
* station has completed association. This is only used if the driver * entry in the driver. Adding STA entries is used only if the driver
* does not take care of association processing. * does not take care of association processing.
* *
* With TDLS, this function is also used to add or set (params->set 1) * With drivers that don't support full AP client state, this function
* TDLS peer entries. * is used to add a station entry to the driver once the station has
* completed association.
*
* With TDLS, this function is used to add or set (params->set 1)
* TDLS peer entries (even with drivers that do not support full AP
* client state).
*/ */
int (*sta_add)(void *priv, struct hostapd_sta_add_params *params); int (*sta_add)(void *priv, struct hostapd_sta_add_params *params);

View file

@ -3748,6 +3748,8 @@ static u32 sta_flags_nl80211(int flags)
f |= BIT(NL80211_STA_FLAG_TDLS_PEER); f |= BIT(NL80211_STA_FLAG_TDLS_PEER);
if (flags & WPA_STA_AUTHENTICATED) if (flags & WPA_STA_AUTHENTICATED)
f |= BIT(NL80211_STA_FLAG_AUTHENTICATED); f |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
if (flags & WPA_STA_ASSOCIATED)
f |= BIT(NL80211_STA_FLAG_ASSOCIATED);
return f; return f;
} }
@ -3800,7 +3802,17 @@ static int wpa_driver_nl80211_sta_add(void *priv,
if (!msg || nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, params->addr)) if (!msg || nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, params->addr))
goto fail; goto fail;
if (!params->set || (params->flags & WPA_STA_TDLS_PEER)) { /*
* Set the below properties only in one of the following cases:
* 1. New station is added, already associated.
* 2. Set WPA_STA_TDLS_PEER station.
* 3. Set an already added unassociated station, if driver supports
* full AP client state. (Set these properties after station became
* associated will be rejected by the driver).
*/
if (!params->set || (params->flags & WPA_STA_TDLS_PEER) ||
(params->set && FULL_AP_CLIENT_STATE_SUPP(drv->capa.flags) &&
(params->flags & WPA_STA_ASSOCIATED))) {
wpa_hexdump(MSG_DEBUG, " * supported rates", wpa_hexdump(MSG_DEBUG, " * supported rates",
params->supp_rates, params->supp_rates_len); params->supp_rates, params->supp_rates_len);
wpa_printf(MSG_DEBUG, " * capability=0x%x", wpa_printf(MSG_DEBUG, " * capability=0x%x",
@ -3848,9 +3860,12 @@ static int wpa_driver_nl80211_sta_add(void *priv,
/* /*
* cfg80211 validates that AID is non-zero, so we have * cfg80211 validates that AID is non-zero, so we have
* to make this a non-zero value for the TDLS case where * to make this a non-zero value for the TDLS case where
* a dummy STA entry is used for now. * a dummy STA entry is used for now and for a station
* that is still not associated.
*/ */
wpa_printf(MSG_DEBUG, " * aid=1 (TDLS workaround)"); wpa_printf(MSG_DEBUG, " * aid=1 (%s workaround)",
(params->flags & WPA_STA_TDLS_PEER) ?
"TDLS" : "UNASSOC_STA");
if (nla_put_u16(msg, NL80211_ATTR_STA_AID, 1)) if (nla_put_u16(msg, NL80211_ATTR_STA_AID, 1))
goto fail; goto fail;
} }
@ -3863,6 +3878,15 @@ static int wpa_driver_nl80211_sta_add(void *priv,
wpa_printf(MSG_DEBUG, " * peer_aid=%u", params->aid); wpa_printf(MSG_DEBUG, " * peer_aid=%u", params->aid);
if (nla_put_u16(msg, NL80211_ATTR_PEER_AID, params->aid)) if (nla_put_u16(msg, NL80211_ATTR_PEER_AID, params->aid))
goto fail; goto fail;
} else if (FULL_AP_CLIENT_STATE_SUPP(drv->capa.flags) &&
(params->flags & WPA_STA_ASSOCIATED)) {
wpa_printf(MSG_DEBUG, " * aid=%u", params->aid);
wpa_printf(MSG_DEBUG, " * listen_interval=%u",
params->listen_interval);
if (nla_put_u16(msg, NL80211_ATTR_STA_AID, params->aid) ||
nla_put_u16(msg, NL80211_ATTR_STA_LISTEN_INTERVAL,
params->listen_interval))
goto fail;
} }
if (params->vht_opmode_enabled) { if (params->vht_opmode_enabled) {
@ -3893,6 +3917,36 @@ static int wpa_driver_nl80211_sta_add(void *priv,
os_memset(&upd, 0, sizeof(upd)); os_memset(&upd, 0, sizeof(upd));
upd.set = sta_flags_nl80211(params->flags); upd.set = sta_flags_nl80211(params->flags);
upd.mask = upd.set | sta_flags_nl80211(params->flags_mask); upd.mask = upd.set | sta_flags_nl80211(params->flags_mask);
/*
* If the driver doesn't support full AP client state, ignore ASSOC/AUTH
* flags, as nl80211 driver moves a new station, by default, into
* associated state.
*
* On the other hand, if the driver supports that feature and the
* station is added in unauthenticated state, set the
* authenticated/associated bits in the mask to prevent moving this
* station to associated state before it is actually associated.
*
* This is irrelevant for mesh mode where the station is added to the
* driver as authenticated already, and ASSOCIATED isn't part of the
* nl80211 API.
*/
if (!is_mesh_interface(drv->nlmode)) {
if (!FULL_AP_CLIENT_STATE_SUPP(drv->capa.flags)) {
wpa_printf(MSG_DEBUG,
"nl80211: Ignore ASSOC/AUTH flags since driver doesn't support full AP client state");
upd.mask &= ~(BIT(NL80211_STA_FLAG_ASSOCIATED) |
BIT(NL80211_STA_FLAG_AUTHENTICATED));
} else if (!params->set &&
!(params->flags & WPA_STA_TDLS_PEER)) {
if (!(params->flags & WPA_STA_AUTHENTICATED))
upd.mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
if (!(params->flags & WPA_STA_ASSOCIATED))
upd.mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
}
}
wpa_printf(MSG_DEBUG, " * flags set=0x%x mask=0x%x", wpa_printf(MSG_DEBUG, " * flags set=0x%x mask=0x%x",
upd.set, upd.mask); upd.set, upd.mask);
if (nla_put(msg, NL80211_ATTR_STA_FLAGS2, sizeof(upd), &upd)) if (nla_put(msg, NL80211_ATTR_STA_FLAGS2, sizeof(upd), &upd))

View file

@ -428,6 +428,9 @@ static void wiphy_info_feature_flags(struct wiphy_info_data *info,
if (flags & NL80211_FEATURE_HT_IBSS) if (flags & NL80211_FEATURE_HT_IBSS)
capa->flags |= WPA_DRIVER_FLAGS_HT_IBSS; capa->flags |= WPA_DRIVER_FLAGS_HT_IBSS;
if (flags & NL80211_FEATURE_FULL_AP_CLIENT_STATE)
capa->flags |= WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE;
} }