diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 74cc55c1b..2f3878806 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -771,6 +771,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_IFNAME: network interface name
  * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
  *
+ * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
+ *	that don't have a netdev (u64)
+ *
  * @NL80211_ATTR_MAC: MAC address (various uses)
  *
  * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
@@ -1242,6 +1245,12 @@ enum nl80211_commands {
  * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
  *      or 0 to disable background scan.
  *
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
+ *	userspace. If unset it is assumed the hint comes directly from
+ *	a user. If set code could specify exactly what type of source
+ *	was used to provide the hint. For the different types of
+ *	allowed user regulatory hints see nl80211_user_reg_hint_type.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1493,6 +1502,10 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_BG_SCAN_PERIOD,
 
+	NL80211_ATTR_WDEV,
+
+	NL80211_ATTR_USER_REG_HINT_TYPE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1545,6 +1558,8 @@ enum nl80211_attrs {
 /* default RSSI threshold for scan results if none specified. */
 #define NL80211_SCAN_RSSI_THOLD_OFF		-300
 
+#define NL80211_CQM_TXE_MAX_INTVL		1800
+
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
@@ -1638,12 +1653,20 @@ struct nl80211_sta_flag_update {
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
  * when getting information about the bitrate of a station.
+ * There are 2 attributes for bitrate, a legacy one that represents
+ * a 16-bit value, and new one that represents a 32-bit value.
+ * If the rate value fits into 16 bit, both attributes are reported
+ * with the same value. If the rate is too high to fit into 16 bits
+ * (>6.5535Gbps) only 32-bit attribute is included.
+ * User space tools encouraged to use the 32-bit attribute and fall
+ * back to the 16-bit one for compatibility with older kernels.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
@@ -1653,6 +1676,7 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_MCS,
 	NL80211_RATE_INFO_40_MHZ_WIDTH,
 	NL80211_RATE_INFO_SHORT_GI,
+	NL80211_RATE_INFO_BITRATE32,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -2044,6 +2068,26 @@ enum nl80211_dfs_regions {
 	NL80211_DFS_JP		= 3,
 };
 
+/**
+ * enum nl80211_user_reg_hint_type - type of user regulatory hint
+ *
+ * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
+ *	assumed if the attribute is not set.
+ * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
+ *	base station. Device drivers that have been tested to work
+ *	properly to support this type of hint can enable these hints
+ *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
+ *	capability on the struct wiphy. The wireless core will
+ *	ignore all cell base station hints until at least one device
+ *	present has been registered with the wireless core that
+ *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ *	supported feature.
+ */
+enum nl80211_user_reg_hint_type {
+	NL80211_USER_REG_HINT_USER	= 0,
+	NL80211_USER_REG_HINT_CELL_BASE = 1,
+};
+
 /**
  * enum nl80211_survey_info - survey information
  *
@@ -2575,6 +2619,17 @@ enum nl80211_ps_state {
  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
  * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
  *	consecutive packets were not acknowledged by the peer
+ * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
+ *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
+ *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
+ *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
+ * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
+ *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
+ *	checked.
+ * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
+ *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
+ *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
+ *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -2584,6 +2639,9 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_RSSI_HYST,
 	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
 	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+	NL80211_ATTR_CQM_TXE_RATE,
+	NL80211_ATTR_CQM_TXE_PKTS,
+	NL80211_ATTR_CQM_TXE_INTVL,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
@@ -2933,11 +2991,15 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
  * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
  *	the connected inactive stations in AP mode.
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+ *	to work properly to suppport receiving regulatory hints from
+ *	cellular base stations.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
 	NL80211_FEATURE_HT_IBSS		= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+	NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
 };
 
 /**