jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Fix hostapd obss_interval documentation

Browse source 
This parameter has been available for more than just testing purposes,
i.e., OBSS scanning has already been used to enable 20-to-40 MHz channel
changes on 2.4 GHz.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Jouni Malinen 2015-02-03 12:32:37 +02:00 committed by Jouni Malinen
parent d027c7b118
commit d2ca6baa56
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
hostapd/hostapd.conf
View file

@ -494,9 +494,9 @@ wmm_ac_vo_acm=0
# If set non-zero, require stations to perform scans of overlapping # If set non-zero, require stations to perform scans of overlapping
# channels to test for stations which would be affected by 40 MHz traffic. # channels to test for stations which would be affected by 40 MHz traffic.
# This parameter sets the interval in seconds between these scans. This # This parameter sets the interval in seconds between these scans. Setting this
# is useful only for testing that stations properly set the OBSS interval, # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz channel if
# since the other parameters in the OBSS scan parameters IE are set to 0. # no co-existence issues with neighboring devices are found.
#obss_interval=0 #obss_interval=0
##### IEEE 802.11ac related configuration ##################################### ##### IEEE 802.11ac related configuration #####################################