diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 07c1a21fb..da15e4ab4 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -332,6 +332,12 @@ enum qca_radiotap_vendor_ids {
  *	These scan parameters shall be reset by the driver/firmware once
  *	disconnected. The attributes used with this command are defined in
  *	enum qca_wlan_vendor_attr_active_tos.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the
+ *	driver has detected an internal failure. This event carries the
+ *	information indicating the reason that triggered this detection. The
+ *	attributes for this command are defined in
+ *	enum qca_wlan_vendor_attr_hang.
  */
 enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -463,6 +469,7 @@ enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154,
 	QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155,
 	QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156,
+	QCA_NL80211_VENDOR_SUBCMD_HANG = 157,
 };
 
 
@@ -3868,4 +3875,51 @@ enum qca_wlan_vendor_attr_active_tos {
 	QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2,
 };
 
+enum qca_wlan_vendor_hang_reason {
+	/* Unspecified reason */
+	QCA_WLAN_HANG_REASON_UNSPECIFIED = 0,
+	/* No Map for the MAC entry for the received frame */
+	QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1,
+	/* Peer deletion timeout happened */
+	QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2,
+	/* Peer unmap timeout */
+	QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3,
+	/* Scan request timed out */
+	QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4,
+	/* Consecutive Scan attempt failures */
+	QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5,
+	/* Unable to get the message buffer */
+	QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6,
+	/* Current command processing is timedout */
+	QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7,
+	/* Timeout for an ACK from FW for suspend request */
+	QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8,
+	/* Timeout for an ACK from FW for resume request */
+	QCA_WLAN_HANG_RESUME_TIMEOUT = 9,
+	/* Transmission timeout for consecutive data frames */
+	QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10,
+	/* Timeout for the TX completion status of data frame */
+	QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11,
+	/* DXE failure for TX/RX, DXE resource unavailability */
+	QCA_WLAN_HANG_DXE_FAILURE = 12,
+	/* WMI pending commands exceed the maximum count */
+	QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_hang - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_HANG.
+ */
+enum qca_wlan_vendor_attr_hang {
+	QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0,
+	/* Reason for the hang - u32 attribute with a value from enum
+	 * qca_wlan_vendor_hang_reason.
+	 */
+	QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1,
+
+	QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_HANG_MAX =
+		QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */