diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index 5d24d279d..edc8a9144 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -7422,10 +7422,40 @@ enum qca_wlan_vendor_attr_roam_scan { * enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. + * @QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL: CFR method using QoS Null frame + * @QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE: CFR method using QoS Null frame + * with phase + * @QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE: CFR method using Probe Response frame */ enum qca_wlan_vendor_cfr_method { - /* CFR method using QOS Null frame */ QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0, + QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE = 1, + QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE = 2, +}; + +/** + * enum qca_wlan_vendor_cfr_capture_type - QCA vendor CFR capture type used by + * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE. + * @QCA_WLAN_VENDOR_CFR_DIRECT_FTM: Filter directed FTM ACK frames. + * @QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK: Filter all FTM ACK frames. + * @QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP: Filter NDPA NDP directed frames. + * @QCA_WLAN_VENDOR_CFR_TA_RA: Filter frames based on TA/RA/Subtype which + * is provided by one or more of below attributes: + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER + * @QCA_WLAN_CFR_ALL_PACKET: Filter all packets. + */ +enum qca_wlan_vendor_cfr_capture_type { + QCA_WLAN_VENDOR_CFR_DIRECT_FTM = 0, + QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK = 1, + QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP = 2, + QCA_WLAN_VENDOR_CFR_TA_RA = 3, + QCA_WLAN_VENDOR_CFR_ALL_PACKET = 4, }; /** @@ -7433,44 +7463,177 @@ enum qca_wlan_vendor_cfr_method { * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer * Channel Frequency Response capture parameters and enable periodic CFR * capture. + * + * @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Required (6-byte MAC address) + * MAC address of peer. This is for CFR version 1 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE: Required (flag) + * Enable peer CFR capture. This attribute is mandatory to enable peer CFR + * capture. If this attribute is not present, peer CFR capture is disabled. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Required (u8) + * BW of measurement, attribute uses the values in enum nl80211_chan_width + * Supported values: 20, 40, 80, 80+80, 160. + * Note that all targets may not support all bandwidths. + * This attribute is mandatory for version 1 if attribute + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Required (u32) + * Periodicity of CFR measurement in milliseconds. + * Periodicity should be a multiple of Base timer. + * Current Base timer value supported is 10 milliseconds (default). + * 0 for one shot capture. + * This attribute is mandatory for version 1 if attribute + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Required (u8) + * Method used to capture Channel Frequency Response. + * Attribute uses the values defined in enum qca_wlan_vendor_cfr_method. + * This attribute is mandatory for version 1 if attribute + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. + * + * @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Required (flag) + * Enable periodic CFR capture. + * This attribute is mandatory for version 1 to enable Periodic CFR capture. + * If this attribute is not present, periodic CFR capture is disabled. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Required (u8) + * Value is 1 or 2 since there are two versions of CFR capture. Two versions + * can't be enabled at same time. This attribute is mandatory if target + * support both versions and use one of them. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Required (u32) + * This attribute is mandatory for version 2 if + * QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY is used. + * Bits 15:0 bitfield indicates which group is to be enabled. + * Bits 31:16 Reserved for future use. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION: Optional (u32) + * CFR capture duration in microsecond. This attribute is mandatory for + * version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL is used. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL: Optional (u32) + * CFR capture interval in microsecond. This attribute is mandatory for + * version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION is used. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Required (u32) + * CFR capture type is defined in enum qca_wlan_vendor_cfr_capture_type. + * This attribute is mandatory for version 2. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK: Optional (u64) + * Bitfield indicating which user in the current UL MU transmissions are + * enabled for CFR capture. Bits 36 to 0 indicate user indexes for 37 users in + * a UL MU transmission. If bit 0 is set, the CFR capture will happen for user + * index 0 in the current UL MU transmission. If bits 0 and 2 are set, CFR + * capture for UL MU TX corresponds to user indices 0 and 2. Bits 63:37 are + * reserved for future use. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT: Optional (u32) + * Indicates the number of consecutive RX frames to be skipped before CFR + * capture is enabled again. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE: Nested attribute containing + * one or more %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY attributes. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY: Nested attribute containing + * the following group attributes: + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER, + * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Required (u32) + * Target supports multiple groups for some configurations. The group number + * can be any value between 0 and 15. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA: Optional (6-byte MAC address) + * Transmitter address which is used to filter frames. This MAC address takes + * effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK. This is for CFR + * version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA: Optional (6-byte MAC address) + * Receiver address which is used to filter frames. This MAC address takes + * effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK. This is for CFR + * version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK: Optional (6-byte MAC address) + * Mask of transmitter address which is used to filter frames. This is for CFR + * version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK: Optional (6-byte MAC address) + * Mask of receiver address which is used to filter frames. This is for CFR + * version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS: Optional (u32) + * Indicates frames with a specific NSS will be filtered for CFR capture. + * This is for CFR version 2 only. This is a bitmask. Bits 7:0 request CFR + * capture to be done for frames matching the NSS specified within this bitmask. + * Bits 31:8 are reserved for future use. Bits 7:0 map to NSS: + * bit 0 : NSS 1 + * bit 1 : NSS 2 + * ... + * bit 7 : NSS 8 + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW: Optional (u32) + * Indicates frames with a specific bandwidth will be filtered for CFR capture. + * This is for CFR version 2 only. This is a bitmask. Bits 4:0 request CFR + * capture to be done for frames matching the bandwidths specified within this + * bitmask. Bits 31:5 are reserved for future use. Bits 4:0 map to bandwidth + * numerated in enum nl80211_band (although not all bands may be supported + * by a given device). + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER: Optional (u32) + * Management frames matching the subtype filter categories will be filtered in + * by MAC for CFR capture. This is a bitmask in which each bit represents the + * corresponding Management frame subtype value per IEEE Std 802.11-2016, + * 9.2.4.1.3 Type and Subtype subfields. For example, Beacon frame control type + * is 8 and its value is 1 << 8 = 0x100. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER: Optional (u32) + * Control frames matching the subtype filter categories will be filtered in by + * MAC for CFR capture. This is a bitmask in which each bit represents the + * corresponding Control frame subtype value per IEEE Std 802.11-2016, + * 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only. + * + * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER: Optional (u32) + * Data frames matching the subtype filter categories will be filtered in by + * MAC for CFR capture. This is a bitmask in which each bit represents the + * corresponding Data frame subtype value per IEEE Std 802.11-2016, + * 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only. */ enum qca_wlan_vendor_peer_cfr_capture_attr { QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0, - /* 6-byte MAC address of the peer. - * This attribute is mandatory. - */ QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1, - /* Enable peer CFR Capture, flag attribute. - * This attribute is mandatory to enable peer CFR capture. - * If this attribute is not present, peer CFR capture is disabled. - */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2, - /* BW of measurement, attribute uses the values in enum nl80211_chan_width - * Supported values: 20, 40, 80, 80+80, 160. - * Note that all targets may not support all bandwidths. - * u8 attribute. This attribute is mandatory if attribute - * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. - */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3, - /* Periodicity of CFR measurement in msec. - * Periodicity should be a multiple of Base timer. - * Current Base timer value supported is 10 msecs (default). - * 0 for one shot capture. u32 attribute. - * This attribute is mandatory if attribute - * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. - */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4, - /* Method used to capture Channel Frequency Response. - * Attribute uses the values defined in enum qca_wlan_vendor_cfr_method. - * u8 attribute. This attribute is mandatory if attribute - * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. - */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5, - /* Enable periodic CFR capture, flag attribute. - * This attribute is mandatory to enable Periodic CFR capture. - * If this attribute is not present, periodic CFR capture is disabled. - */ QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION = 7, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP = 8, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION = 9, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL = 10, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE = 11, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK = 12, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT = 13, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE = 14, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY = 15, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER = 16, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA = 17, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA = 18, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK = 19, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK = 20, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS = 21, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW = 22, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER = 23, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER = 24, + QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER = 25, /* Keep last */ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST,