tests: ACS for 40 MHz channels, on 5 GHz, and for VHT

The 5 GHz cases are not yet complete due to missing mac80211_hwsim
functionality. The current test cases allow the ACS operation to fail
for those cases.

Signed-off-by: Jouni Malinen <j@w1.fi>

tests/hwsim/test_ap_acs.py

@@ -6,31 +6,34 @@
 
 import logging
 logger = logging.getLogger()
+import subprocess
 
 import hostapd
 
 def wait_acs(hapd):
     ev = hapd.wait_event(["ACS-STARTED", "ACS-COMPLETED", "ACS-FAILED",
-                          "AP-ENABLED"], timeout=5)
+                          "AP-ENABLED", "AP-DISABLED"], timeout=5)
     if not ev:
         raise Exception("ACS start timed out")
     if "ACS-STARTED" not in ev:
-        raise Exception("Unexpected ACS event")
+        raise Exception("Unexpected ACS event: " + ev)
 
     state = hapd.get_status_field("state")
     if state != "ACS":
         raise Exception("Unexpected interface state")
 
-    ev = hapd.wait_event(["ACS-COMPLETED", "ACS-FAILED", "AP-ENABLED"],
+    ev = hapd.wait_event(["ACS-COMPLETED", "ACS-FAILED", "AP-ENABLED",
-                         timeout=20)
+                          "AP-DISABLED"], timeout=20)
     if not ev:
         raise Exception("ACS timed out")
     if "ACS-COMPLETED" not in ev:
-        raise Exception("Unexpected ACS event")
+        raise Exception("Unexpected ACS event: " + ev)
 
-    ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
+    ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5)
     if not ev:
         raise Exception("AP setup timed out")
+    if "AP-ENABLED" not in ev:
+        raise Exception("Unexpected ACS event: " + ev)
 
     state = hapd.get_status_field("state")
     if state != "ENABLED":
@@ -64,3 +67,113 @@ def test_ap_multi_bss_acs(dev, apdev):
     dev[0].connect("bss-1", key_mgmt="NONE", scan_freq=freq)
     dev[1].connect("bss-2", psk="12345678", scan_freq=freq)
     dev[2].connect("bss-3", psk="qwertyuiop", scan_freq=freq)
+
+def test_ap_acs_40mhz(dev, apdev):
+    """Automatic channel selection for 40 MHz channel"""
+    params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
+    params['channel'] = '0'
+    params['ht_capab'] = '[HT40+]'
+    hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+    wait_acs(hapd)
+
+    freq = hapd.get_status_field("freq")
+    if int(freq) < 2400:
+        raise Exception("Unexpected frequency")
+    sec = hapd.get_status_field("secondary_channel")
+    if int(sec) == 0:
+        raise Exception("Secondary channel not set")
+
+    dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
+
+def test_ap_acs_5ghz(dev, apdev):
+    """Automatic channel selection on 5 GHz"""
+    try:
+        params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
+        params['hw_mode'] = 'a'
+        params['channel'] = '0'
+        params['country_code'] = 'US'
+        hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+        # TODO: Remove exception acceptance once mac80211_hwsim supports ACS on
+        # 5 GHz
+        run = False
+        try:
+            wait_acs(hapd)
+            run = True
+        except Exception, e:
+            logger.info("Ignore exception due to missing hwsim support: " + str(e))
+
+        if run:
+            freq = hapd.get_status_field("freq")
+            if int(freq) < 5000:
+                raise Exception("Unexpected frequency")
+
+            dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
+
+    finally:
+        subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])
+
+def test_ap_acs_5ghz_40mhz(dev, apdev):
+    """Automatic channel selection on 5 GHz for 40 MHz channel"""
+    try:
+        params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
+        params['hw_mode'] = 'a'
+        params['channel'] = '0'
+        params['ht_capab'] = '[HT40+]'
+        params['country_code'] = 'US'
+        hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+        # TODO: Remove exception acceptance once mac80211_hwsim supports ACS on
+        # 5 GHz
+        run = False
+        try:
+            wait_acs(hapd)
+            run = True
+        except Exception, e:
+            logger.info("Ignore exception due to missing hwsim support: " + str(e))
+
+        if run:
+            freq = hapd.get_status_field("freq")
+            if int(freq) < 5000:
+                raise Exception("Unexpected frequency")
+
+            sec = hapd.get_status_field("secondary_channel")
+            if int(sec) == 0:
+                raise Exception("Secondary channel not set")
+
+            dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
+
+    finally:
+        subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])
+
+def test_ap_acs_vht(dev, apdev):
+    """Automatic channel selection for VHT"""
+    try:
+        params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
+        params['hw_mode'] = 'a'
+        params['channel'] = '0'
+        params['ht_capab'] = '[HT40+]'
+        params['country_code'] = 'US'
+        params['ieee80211ac'] = '1'
+        params['vht_oper_chwidth'] = '1'
+        hapd = hostapd.add_ap(apdev[0]['ifname'], params, wait_enabled=False)
+        # TODO: Remove exception acceptance once mac80211_hwsim supports ACS on
+        # 5 GHz
+        run = False
+        try:
+            wait_acs(hapd)
+            run = True
+        except Exception, e:
+            logger.info("Ignore exception due to missing hwsim support: " + str(e))
+
+        if run:
+            freq = hapd.get_status_field("freq")
+            if int(freq) < 5000:
+                raise Exception("Unexpected frequency")
+
+            sec = hapd.get_status_field("secondary_channel")
+            if int(sec) == 0:
+                raise Exception("Secondary channel not set")
+
+            dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
+
+    finally:
+        subprocess.call(['sudo', 'iw', 'reg', 'set', '00'])