Change CFR attributes from required to optional

Some CFR attributes are used frequently with conditions, so change them
from required to optional.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This commit is contained in:
Wu Gao 2020-03-23 21:13:13 +08:00 committed by Jouni Malinen
parent e520de8dbe
commit a163bfe2bc
1 changed files with 9 additions and 9 deletions

View File

@ -7464,21 +7464,21 @@ enum qca_wlan_vendor_cfr_capture_type {
* Channel Frequency Response capture parameters and enable periodic CFR
* capture.
*
* @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Required (6-byte MAC address)
* @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Optional (6-byte MAC address)
* MAC address of peer. This is for CFR version 1 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE: Required (flag)
* Enable peer CFR capture. This attribute is mandatory to enable peer CFR
* capture. If this attribute is not present, peer CFR capture is disabled.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Required (u8)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Optional (u8)
* BW of measurement, attribute uses the values in enum nl80211_chan_width
* Supported values: 20, 40, 80, 80+80, 160.
* Note that all targets may not support all bandwidths.
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Optional (u32)
* Periodicity of CFR measurement in milliseconds.
* Periodicity should be a multiple of Base timer.
* Current Base timer value supported is 10 milliseconds (default).
@ -7486,23 +7486,23 @@ enum qca_wlan_vendor_cfr_capture_type {
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Required (u8)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Optional (u8)
* Method used to capture Channel Frequency Response.
* Attribute uses the values defined in enum qca_wlan_vendor_cfr_method.
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Required (flag)
* @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Optional (flag)
* Enable periodic CFR capture.
* This attribute is mandatory for version 1 to enable Periodic CFR capture.
* If this attribute is not present, periodic CFR capture is disabled.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Required (u8)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Optional (u8)
* Value is 1 or 2 since there are two versions of CFR capture. Two versions
* can't be enabled at same time. This attribute is mandatory if target
* support both versions and use one of them.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Optional (u32)
* This attribute is mandatory for version 2 if
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY is used.
* Bits 15:0 bitfield indicates which group is to be enabled.
@ -7516,7 +7516,7 @@ enum qca_wlan_vendor_cfr_capture_type {
* CFR capture interval in microsecond. This attribute is mandatory for
* version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Optional (u32)
* CFR capture type is defined in enum qca_wlan_vendor_cfr_capture_type.
* This attribute is mandatory for version 2.
*
@ -7548,7 +7548,7 @@ enum qca_wlan_vendor_cfr_capture_type {
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Optional (u32)
* Target supports multiple groups for some configurations. The group number
* can be any value between 0 and 15. This is for CFR version 2 only.
*