tests: RSN pre-auth and PMKSA caching with per_sta_vif

This adds new tests to verify pmksa_cache_preauth when
used with per_sta_vif and possibly vlans.

While at it it refactors the code such that the tests
  pmksa_cache_preauth
  pmksa_cache_preauth_vlan_enabled
  pmksa_cache_preauth_vlan_used
  pmksa_cache_preauth_per_sta_vif
  pmksa_cache_preauth_vlan_enabled_per_sta_vif
  pmksa_cache_preauth_vlan_used_per_sta_vif
share code where possible.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
This commit is contained in:
Michael Braun 2016-02-24 12:53:10 +01:00 committed by Jouni Malinen
parent 78bb62b28c
commit a12b30f2d4
3 changed files with 77 additions and 125 deletions

View file

@ -1 +1,2 @@
1 wlan3.1
* wlan3.#

View file

@ -1 +1,2 @@
1 wlan4.1
* wlan4.#

View file

@ -382,142 +382,31 @@ def test_pmksa_cache_and_cui(dev, apdev):
if state != "COMPLETED":
raise Exception("Reauthentication did not complete")
def test_pmksa_cache_preauth(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry"""
def generic_pmksa_cache_preauth(dev, apdev, extraparams, identity, databridge,
force_disconnect=False):
if not extraparams:
extraparams = [{}, {}]
try:
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
hostapd.add_ap(apdev[0]['ifname'], params)
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
for key, value in extraparams[0].iteritems():
params[key] = value
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
params['rsn_preauth'] = '1'
params['rsn_preauth_interfaces'] = 'ap-br0'
hostapd.add_ap(apdev[1]['ifname'], params)
bssid1 = apdev[1]['bssid']
dev[0].scan(freq="2412")
success = False
status_seen = False
for i in range(0, 50):
if not status_seen:
status = dev[0].request("STATUS")
if "Pre-authentication EAPOL state machines:" in status:
status_seen = True
time.sleep(0.1)
pmksa = dev[0].get_pmksa(bssid1)
if pmksa:
success = True
break
if not success:
raise Exception("No PMKSA cache entry created from pre-authentication")
if not status_seen:
raise Exception("Pre-authentication EAPOL status was not available")
dev[0].scan(freq="2412")
if "[WPA2-EAP-CCMP-preauth]" not in dev[0].request("SCAN_RESULTS"):
raise Exception("Scan results missing RSN element info")
dev[0].request("ROAM " + bssid1)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
"CTRL-EVENT-CONNECTED"], timeout=10)
if ev is None:
raise Exception("Roaming with the AP timed out")
if "CTRL-EVENT-EAP-STARTED" in ev:
raise Exception("Unexpected EAP exchange")
pmksa2 = dev[0].get_pmksa(bssid1)
if pmksa2 is None:
raise Exception("No PMKSA cache entry")
if pmksa['pmkid'] != pmksa2['pmkid']:
raise Exception("Unexpected PMKID change")
finally:
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down'])
subprocess.call(['brctl', 'delbr', 'ap-br0'])
def test_pmksa_cache_preauth_vlan_enabled(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set)"""
try:
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
params['dynamic_vlan'] = '1'
hostapd.add_ap(apdev[0]['ifname'], params)
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
eap_connect(dev[0], apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
params['rsn_preauth'] = '1'
params['rsn_preauth_interfaces'] = 'ap-br0'
params['dynamic_vlan'] = '1'
hostapd.add_ap(apdev[1]['ifname'], params)
bssid1 = apdev[1]['bssid']
dev[0].scan(freq="2412")
success = False
status_seen = False
for i in range(0, 50):
if not status_seen:
status = dev[0].request("STATUS")
if "Pre-authentication EAPOL state machines:" in status:
status_seen = True
time.sleep(0.1)
pmksa = dev[0].get_pmksa(bssid1)
if pmksa:
success = True
break
if not success:
raise Exception("No PMKSA cache entry created from pre-authentication")
if not status_seen:
raise Exception("Pre-authentication EAPOL status was not available")
dev[0].scan(freq="2412")
if "[WPA2-EAP-CCMP-preauth]" not in dev[0].request("SCAN_RESULTS"):
raise Exception("Scan results missing RSN element info")
dev[0].request("ROAM " + bssid1)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-STARTED",
"CTRL-EVENT-CONNECTED"], timeout=10)
if ev is None:
raise Exception("Roaming with the AP timed out")
if "CTRL-EVENT-EAP-STARTED" in ev:
raise Exception("Unexpected EAP exchange")
pmksa2 = dev[0].get_pmksa(bssid1)
if pmksa2 is None:
raise Exception("No PMKSA cache entry")
if pmksa['pmkid'] != pmksa2['pmkid']:
raise Exception("Unexpected PMKID change")
finally:
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down'])
subprocess.call(['brctl', 'delbr', 'ap-br0'])
def test_pmksa_cache_preauth_vlan_used(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (station with VLAN set)"""
try:
subprocess.call(['brctl', 'addbr', 'brvlan1'])
subprocess.call(['brctl', 'setfd', 'brvlan1', '0'])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
params['dynamic_vlan'] = '1'
params['vlan_file'] = 'hostapd.wlan3.vlan'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
subprocess.call(['brctl', 'setfd', 'ap-br0', '0'])
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'up'])
eap_connect(dev[0], apdev[0], "PAX", "vlan1",
eap_connect(dev[0], apdev[0], "PAX", identity,
password_hex="0123456789abcdef0123456789abcdef")
# Verify connectivity in the correct VLAN
hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge)
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['bridge'] = 'ap-br0'
params['rsn_preauth'] = '1'
params['rsn_preauth_interfaces'] = 'brvlan1'
params['dynamic_vlan'] = '1'
params['vlan_file'] = 'hostapd.wlan4.vlan'
params['rsn_preauth_interfaces'] = databridge
for key, value in extraparams[1].iteritems():
params[key] = value
hostapd.add_ap(apdev[1]['ifname'], params)
bssid1 = apdev[1]['bssid']
dev[0].scan(freq="2412")
@ -555,7 +444,10 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev):
raise Exception("Unexpected PMKID change")
# Verify connectivity in the correct VLAN
hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
hwsim_utils.test_connectivity_iface(dev[0], hapd, databridge)
if not force_disconnect:
return
# Disconnect the STA from both APs to avoid forceful ifdown by the
# test script on a VLAN that this has an associated STA. That used to
@ -566,6 +458,59 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev):
finally:
subprocess.call(['ip', 'link', 'set', 'dev', 'ap-br0', 'down'],
stderr=open('/dev/null', 'w'))
subprocess.call(['brctl', 'delbr', 'ap-br0'],
stderr=open('/dev/null', 'w'))
def test_pmksa_cache_preauth(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry"""
generic_pmksa_cache_preauth(dev, apdev, None,
"pax.user@example.com", "ap-br0")
def test_pmksa_cache_preauth_per_sta_vif(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry with per_sta_vif"""
extraparams = [{}, {}]
extraparams[0]['per_sta_vif'] = "1"
extraparams[1]['per_sta_vif'] = "1"
generic_pmksa_cache_preauth(dev, apdev, extraparams,
"pax.user@example.com", "ap-br0")
def test_pmksa_cache_preauth_vlan_enabled(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set)"""
extraparams = [{}, {}]
extraparams[0]['dynamic_vlan'] = '1'
extraparams[1]['dynamic_vlan'] = '1'
generic_pmksa_cache_preauth(dev, apdev, extraparams,
"pax.user@example.com", "ap-br0")
def test_pmksa_cache_preauth_vlan_enabled_per_sta_vif(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (dynamic_vlan optional but station without VLAN set, with per_sta_vif enabled)"""
extraparams = [{}, {}]
extraparams[0]['per_sta_vif'] = "1"
extraparams[1]['per_sta_vif'] = "1"
extraparams[0]['dynamic_vlan'] = '1'
extraparams[1]['dynamic_vlan'] = '1'
generic_pmksa_cache_preauth(dev, apdev, extraparams,
"pax.user@example.com", "ap-br0")
def test_pmksa_cache_preauth_vlan_used(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (station with VLAN set)"""
run_pmksa_cache_preauth_vlan_used(dev, apdev, None, force_disconnect=True)
def run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams=None,
force_disconnect=False):
try:
subprocess.call(['brctl', 'addbr', 'brvlan1'])
subprocess.call(['brctl', 'setfd', 'brvlan1', '0'])
if not extraparams:
extraparams = [{}, {}]
extraparams[0]['dynamic_vlan'] = '1'
extraparams[0]['vlan_file'] = 'hostapd.wlan3.vlan'
extraparams[1]['dynamic_vlan'] = '1'
extraparams[1]['vlan_file'] = 'hostapd.wlan4.vlan'
generic_pmksa_cache_preauth(dev, apdev, extraparams,
"vlan1", "brvlan1",
force_disconnect=force_disconnect)
finally:
subprocess.call(['ip', 'link', 'set', 'dev', 'brvlan1', 'down'])
subprocess.call(['ip', 'link', 'set', 'dev', 'wlan3.1', 'down'],
stderr=open('/dev/null', 'w'))
@ -575,10 +520,15 @@ def test_pmksa_cache_preauth_vlan_used(dev, apdev):
stderr=open('/dev/null', 'w'))
subprocess.call(['brctl', 'delif', 'brvlan1', 'wlan4.1'],
stderr=open('/dev/null', 'w'))
subprocess.call(['brctl', 'delbr', 'ap-br0'],
stderr=open('/dev/null', 'w'))
subprocess.call(['brctl', 'delbr', 'brvlan1'])
def test_pmksa_cache_preauth_vlan_used_per_sta_vif(dev, apdev):
"""RSN pre-authentication to generate PMKSA cache entry (station with VLAN set, per_sta_vif=1)"""
extraparams = [{}, {}]
extraparams[0]['per_sta_vif'] = "1"
extraparams[1]['per_sta_vif'] = "1"
run_pmksa_cache_preauth_vlan_used(dev, apdev, extraparams)
def test_pmksa_cache_disabled(dev, apdev):
"""PMKSA cache disabling on AP"""
params = hostapd.wpa2_eap_params(ssid="test-pmksa-cache")