From 9bb2f75298e2192d21a0ed2f1a316d965140a62d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 15 Feb 2021 17:36:20 +0200 Subject: [PATCH] Sync with mac80211-next.git include/uapi/linux/nl80211.h This brings in nl80211 definitions as of 2021-02-12. Signed-off-by: Jouni Malinen --- src/drivers/nl80211_copy.h | 127 ++++++++++++++++++++++++++++++++++++- 1 file changed, 124 insertions(+), 3 deletions(-) diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h index 3e0d4a038..ac78da99f 100644 --- a/src/drivers/nl80211_copy.h +++ b/src/drivers/nl80211_copy.h @@ -1178,6 +1178,10 @@ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included * if the recipient acknowledged the frame. * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1408,6 +1412,8 @@ enum nl80211_commands { NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + NL80211_CMD_SET_SAR_SPECS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1957,8 +1963,15 @@ enum nl80211_commands { * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire * probe-response frame. The DA field in the 802.11 header is zero-ed out, * to be filled by the FW. - * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable - * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -2079,7 +2092,8 @@ enum nl80211_commands { * until the channel switch event. * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission * must be blocked on the current channel (before the channel switch - * operation). + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel @@ -2534,6 +2548,15 @@ enum nl80211_commands { * This is a u8 attribute that encapsulates one of the values from * &enum nl80211_sae_pwe_mechanism. * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3025,6 +3048,12 @@ enum nl80211_attrs { NL80211_ATTR_SAE_PWE, + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + + NL80211_ATTR_DISABLE_HE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -7156,4 +7185,96 @@ enum nl80211_sae_pwe_mechanism { NL80211_SAE_PWE_HASH_TO_ELEMENT, NL80211_SAE_PWE_BOTH, }; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */