diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index 83502fd43..d0b4c2dfc 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -4243,6 +4243,139 @@ enum qca_vendor_roam_triggers { QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12, }; +/* + * enum qca_vendor_roam_fail_reasons: Defines the various roam + * fail reasons. This enum value is used in + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute. + * + * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not + * able to trigger the scan. + * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan. + * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam + * scan. + * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host. + * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame. + * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error + * status code. + * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received. + * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request + * frame. + * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame + * with error status code. + * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not + * received. + * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan. + * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication + * frame. + * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped + * internally before transmission. + * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation + * Request frame. + * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is + * dropped internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and + * times out. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped + * internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key + * M2 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped + * internally. + * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4 + * frame. + * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not + * started for final beacon miss case. + * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame + * received from the AP during roaming handoff. + * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps + * or host is suspended and gives the indication of the last roamed AP only + * when the Apps is resumed. If the Apps is resumed while the roaming is in + * progress, this ongoing roaming is aborted and the last roamed AP is + * indicated to host. + * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID. + * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times + * out. + * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails. + */ +enum qca_vendor_roam_fail_reasons { + QCA_ROAM_FAIL_REASON_NONE = 0, + QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1, + QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2, + QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3, + QCA_ROAM_FAIL_REASON_HOST = 4, + QCA_ROAM_FAIL_REASON_AUTH_SEND = 5, + QCA_ROAM_FAIL_REASON_AUTH_RECV = 6, + QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7, + QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8, + QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9, + QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10, + QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11, + QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12, + QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13, + QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14, + QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15, + QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16, + QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17, + QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18, + QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19, + QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20, + QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21, + QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22, + QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23, + QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24, + QCA_ROAM_FAIL_REASON_DISCONNECT = 25, + QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26, + QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27, + QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28, + QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29, +}; + +/* + * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam + * invoke fail reasons. This enum value is used in + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute. + * + * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed + * in roam invoke command. + * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not + * enabled. + * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID + * length is invalid. + * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already + * in progress. + * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response + * of the AP in the roam invoke command to firmware. This reason is sent by the + * firmware when the given AP is configured to be ignored or SSID/security + * does not match. + * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of + * firmware internal reasons. + * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled. + * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke. + * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail. + * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid. + * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to. + * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed. + */ +enum qca_vendor_roam_invoke_fail_reasons { + QCA_ROAM_INVOKE_STATUS_NONE = 0, + QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1, + QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2, + QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3, + QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4, + QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5, + QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6, + QCA_ROAM_INVOKE_STATUS_DISALLOW = 7, + QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8, + QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9, + QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10, + QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11, + QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12, + +}; + /** * enum qca_vendor_attr_roam_candidate_selection_criteria: * @@ -9942,6 +10075,40 @@ enum qca_vendor_wlan_sta_guard_interval { * include this attribute in response to the * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection * failure observed in the last attempted connection. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps) + * used by the station in its last TX frame while communicating to the AP in the + * connected state. When queried in the disconnected state, this represents the + * rate used by the STA in the last TX frame to the AP when it was connected. + * This attribute is used for STA mode only. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only. + * This represents the rate index used by the STA for the last TX frame to the + * AP. When queried in the disconnected state, this gives the last RIX used by + * the STA in the last TX frame to the AP when it was connected. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA + * mode only. This represents the number of times the STA TSF goes out of sync + * from the AP after the connection. If queried in the disconnected state, this + * gives the count of TSF out of sync for the last connection. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA + * mode only. This represents the roam trigger reason for the last roaming + * attempted by the firmware. This can be queried either in connected state or + * disconnected state. Each bit of this attribute represents the different + * roam trigger reason code which are defined in enum qca_vendor_roam_triggers. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode + * only. This represents the roam fail reason for the last failed roaming + * attempt by the firmware. Different roam failure reason codes are specified + * in enum qca_vendor_roam_fail_reasons. This can be queried either in + * connected state or disconnected state. + * + * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in + * STA mode only. This represents the roam invoke fail reason for the last + * failed roam invoke. Different roam invoke failure reason codes + * are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be + * queried either in connected state or disconnected state. */ enum qca_wlan_vendor_attr_get_sta_info { QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0, @@ -9988,6 +10155,12 @@ enum qca_wlan_vendor_attr_get_sta_info { QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41, QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42, QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48, + QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49, /* keep last */ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,