hostapd Make GAS Address3 field selection behavior configurable

gas_address3=1 can now be used to force hostapd to use the IEEE 802.11
standards compliant Address 3 field value (Wildcard BSSID when not
associated) even if the GAS request uses non-compliant address (AP
BSSID).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Jouni Malinen 2016-06-10 21:43:25 +03:00 committed by Jouni Malinen
parent 6996ff7b6d
commit 8359472589
4 changed files with 16 additions and 1 deletions

View File

@ -3481,6 +3481,8 @@ static int hostapd_config_fill(struct hostapd_config *conf,
if (atoi(pos))
bss->radio_measurements[0] |=
WLAN_RRM_CAPS_NEIGHBOR_REPORT;
} else if (os_strcmp(buf, "gas_address3") == 0) {
bss->gas_address3 = atoi(pos);
} else {
wpa_printf(MSG_ERROR,
"Line %d: unknown configuration item '%s'",

View File

@ -1747,6 +1747,13 @@ own_ip_addr=127.0.0.1
# For example, AP Civic Location ANQP-element with unknown location:
#anqp_elem=266:000000
# GAS Address 3 behavior
# 0 = P2P specification (Address3 = AP BSSID) workaround enabled by default
# based on GAS request Address3
# 1 = IEEE 802.11 standard compliant regardless of GAS request Address3
# 2 = Force non-compliant behavior (Address3 = AP BSSID for all cases)
#gas_address3=0
# QoS Map Set configuration
#
# Comma delimited QoS Map Set in decimal values

View File

@ -504,6 +504,7 @@ struct hostapd_bss_config {
u16 gas_comeback_delay;
int gas_frag_limit;
int gas_address3;
u8 qos_map_set[16 + 2 * 21];
unsigned int qos_map_set_len;

View File

@ -1470,7 +1470,12 @@ static void gas_serv_rx_public_action(void *ctx, const u8 *buf, size_t len,
*/
prot = mgmt->u.action.category == WLAN_ACTION_PROTECTED_DUAL;
sa = mgmt->sa;
std_addr3 = is_broadcast_ether_addr(mgmt->bssid);
if (hapd->conf->gas_address3 == 1)
std_addr3 = 1;
else if (hapd->conf->gas_address3 == 2)
std_addr3 = 0;
else
std_addr3 = is_broadcast_ether_addr(mgmt->bssid);
len -= IEEE80211_HDRLEN + 1;
data = buf + IEEE80211_HDRLEN + 1;
switch (data[0]) {