diff --git a/hostapd/driver_nl80211.c b/hostapd/driver_nl80211.c index 8a0adccca..e59f5cdf8 100644 --- a/hostapd/driver_nl80211.c +++ b/hostapd/driver_nl80211.c @@ -23,10 +23,9 @@ #include #include #include -#include +#include "nl80211_copy.h" #include -#include -#include /* The L2 protocols */ +#include #include "wireless_copy.h" #include @@ -387,7 +386,6 @@ static int i802_get_seqnum(const char *iface, void *priv, const u8 *addr, static int i802_set_rate_sets(void *priv, int *supp_rates, int *basic_rates, int mode) { -#ifdef NL80211_ATTR_BSS_BASIC_RATES struct i802_driver_data *drv = priv; struct nl_msg *msg; u8 rates[NL80211_MAX_SUPP_RATES]; @@ -412,9 +410,6 @@ static int i802_set_rate_sets(void *priv, int *supp_rates, int *basic_rates, return send_and_recv_msgs(drv, msg, NULL, NULL); nla_put_failure: return -ENOBUFS; -#else /* NL80211_ATTR_BSS_BASIC_RATES */ - return -1; -#endif /* NL80211_ATTR_BSS_BASIC_RATES */ } @@ -488,7 +483,6 @@ static int i802_send_mgmt_frame(void *priv, const void *data, size_t len, /* Set kernel driver on given frequency (MHz) */ static int i802_set_freq2(void *priv, struct hostapd_freq_params *freq) { -#ifdef NL80211_ATTR_WIPHY_FREQ struct i802_driver_data *drv = priv; struct nl_msg *msg; @@ -525,22 +519,6 @@ static int i802_set_freq2(void *priv, struct hostapd_freq_params *freq) return 0; nla_put_failure: return -1; -#else /* NL80211_ATTR_WIPHY_FREQ */ - struct i802_driver_data *drv = priv; - struct iwreq iwr; - - memset(&iwr, 0, sizeof(iwr)); - os_strlcpy(iwr.ifr_name, drv->hapd->conf->iface, IFNAMSIZ); - iwr.u.freq.m = freq->freq; - iwr.u.freq.e = 6; - - if (ioctl(drv->ioctl_sock, SIOCSIWFREQ, &iwr) < 0) { - perror("ioctl[SIOCSIWFREQ]"); - return -1; - } - - return 0; -#endif /* NL80211_ATTR_WIPHY_FREQ */ } @@ -853,13 +831,11 @@ static int i802_sta_add2(const char *ifname, void *priv, params->listen_interval); #ifdef CONFIG_IEEE80211N -#ifdef NL80211_ATTR_HT_CAPABILITY if (params->ht_capabilities) { NLA_PUT(msg, NL80211_ATTR_HT_CAPABILITY, params->ht_capabilities->length, ¶ms->ht_capabilities->data); } -#endif /* NL80211_ATTR_HT_CAPABILITY */ #endif /* CONFIG_IEEE80211N */ ret = send_and_recv_msgs(drv, msg, NULL, NULL); @@ -954,7 +930,6 @@ static int i802_set_regulatory_domain(void *priv, unsigned int rd) static int i802_set_tx_queue_params(void *priv, int queue, int aifs, int cw_min, int cw_max, int burst_time) { -#ifdef NL80211_ATTR_WIPHY_TXQ_PARAMS struct i802_driver_data *drv = priv; struct nl_msg *msg; struct nlattr *txq, *params; @@ -993,9 +968,6 @@ static int i802_set_tx_queue_params(void *priv, int queue, int aifs, return 0; nla_put_failure: return -1; -#else /* NL80211_ATTR_WIPHY_TXQ_PARAMS */ - return -1; -#endif /* NL80211_ATTR_WIPHY_TXQ_PARAMS */ } @@ -1274,7 +1246,6 @@ static int i802_set_dtim_period(const char *iface, void *priv, int value) static int i802_set_bss(void *priv, int cts, int preamble, int slot) { -#ifdef NL80211_CMD_SET_BSS struct i802_driver_data *drv = priv; struct nl_msg *msg; @@ -1298,9 +1269,6 @@ static int i802_set_bss(void *priv, int cts, int preamble, int slot) return send_and_recv_msgs(drv, msg, NULL, NULL); nla_put_failure: return -ENOBUFS; -#else /* NL80211_CMD_SET_BSS */ - return -1; -#endif /* NL80211_CMD_SET_BSS */ } @@ -1380,9 +1348,7 @@ static int phy_info_handler(struct nl_msg *msg, void *arg) [NL80211_FREQUENCY_ATTR_PASSIVE_SCAN] = { .type = NLA_FLAG }, [NL80211_FREQUENCY_ATTR_NO_IBSS] = { .type = NLA_FLAG }, [NL80211_FREQUENCY_ATTR_RADAR] = { .type = NLA_FLAG }, -#ifdef NL80211_FREQUENCY_ATTR_MAX_TX_POWER [NL80211_FREQUENCY_ATTR_MAX_TX_POWER] = { .type = NLA_U32 }, -#endif /* NL80211_FREQUENCY_ATTR_MAX_TX_POWER */ }; struct nlattr *tb_rate[NL80211_BITRATE_ATTR_MAX + 1]; @@ -1473,12 +1439,10 @@ static int phy_info_handler(struct nl_msg *msg, void *arg) mode->channels[idx].flag |= HOSTAPD_CHAN_RADAR; -#ifdef NL80211_FREQUENCY_ATTR_MAX_TX_POWER if (tb_freq[NL80211_FREQUENCY_ATTR_MAX_TX_POWER] && !tb_freq[NL80211_FREQUENCY_ATTR_DISABLED]) mode->channels[idx].max_tx_power = nla_get_u32(tb_freq[NL80211_FREQUENCY_ATTR_MAX_TX_POWER]) / 100; -#endif /* NL80211_FREQUENCY_ATTR_MAX_TX_POWER */ idx++; } diff --git a/src/common/nl80211_copy.h b/src/common/nl80211_copy.h new file mode 100644 index 000000000..04d4516f9 --- /dev/null +++ b/src/common/nl80211_copy.h @@ -0,0 +1,783 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006, 2007, 2008 Johannes Berg + * Copyright 2008 Michael Wu + * Copyright 2008 Luis Carlos Cobo + * Copyright 2008 Michael Buesch + * Copyright 2008 Luis R. Rodriguez + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/** + * DOC: Station handling + * + * Stations are added per interface, but a special case exists with VLAN + * interfaces. When a station is bound to an AP interface, it may be moved + * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). + * The station is still assumed to belong to the AP interface it was added + * to. + * + * TODO: need more info? + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or + * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request on a %NL80211_ATTR_WIPHY or a specific get + * on an %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or + * %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER + * attributes. + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX + * or %NL80211_ATTR_MAC. + * + * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a + * %NL80222_CMD_NEW_BEACON message) + * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, + * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes. + * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, + * parameters are like for %NL80211_CMD_SET_BEACON. + * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * + * @NL80211_CMD_GET_STATION: Get station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_STATION: Set station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all mesh paths, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * + * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything inbetween, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + NL80211_CMD_GET_KEY, + NL80211_CMD_SET_KEY, + NL80211_CMD_NEW_KEY, + NL80211_CMD_DEL_KEY, + + NL80211_CMD_GET_BEACON, + NL80211_CMD_SET_BEACON, + NL80211_CMD_NEW_BEACON, + NL80211_CMD_DEL_BEACON, + + NL80211_CMD_GET_STATION, + NL80211_CMD_SET_STATION, + NL80211_CMD_NEW_STATION, + NL80211_CMD_DEL_STATION, + + NL80211_CMD_GET_MPATH, + NL80211_CMD_SET_MPATH, + NL80211_CMD_NEW_MPATH, + NL80211_CMD_DEL_MPATH, + + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + NL80211_CMD_GET_MESH_PARAMS, + NL80211_CMD_SET_MESH_PARAMS, + + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211//index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ + * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including + * this attribute) + * NL80211_SEC_CHAN_DISABLED = HT20 only + * NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel + * NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_MAC: MAC address (various uses) + * + * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * + * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU + * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing + * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE + * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE + * + * @NL80211_ATTR_STA_AID: Association ID for the station (u16) + * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_sta_flags. + * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by + * IEEE 802.11 7.3.1.6 (u16). + * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported + * rates as defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station + * to, or the AP interface the station was originally added to to. + * @NL80211_ATTR_STA_INFO: information about a station, part of station info + * given for %NL80211_CMD_GET_STATION, nested attribute containing + * info as possible, see &enum nl80211_sta_info. + * + * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, + * consisting of a nested array. + * + * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). + * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. + * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * &enum nl80211_mpath_info. + * + * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_mntr_flags. + * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything inbetween, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + NL80211_ATTR_MAC, + + NL80211_ATTR_KEY_DATA, + NL80211_ATTR_KEY_IDX, + NL80211_ATTR_KEY_CIPHER, + NL80211_ATTR_KEY_SEQ, + NL80211_ATTR_KEY_DEFAULT, + + NL80211_ATTR_BEACON_INTERVAL, + NL80211_ATTR_DTIM_PERIOD, + NL80211_ATTR_BEACON_HEAD, + NL80211_ATTR_BEACON_TAIL, + + NL80211_ATTR_STA_AID, + NL80211_ATTR_STA_FLAGS, + NL80211_ATTR_STA_LISTEN_INTERVAL, + NL80211_ATTR_STA_SUPPORTED_RATES, + NL80211_ATTR_STA_VLAN, + NL80211_ATTR_STA_INFO, + + NL80211_ATTR_WIPHY_BANDS, + + NL80211_ATTR_MNTR_FLAGS, + + NL80211_ATTR_MESH_ID, + NL80211_ATTR_STA_PLINK_ACTION, + NL80211_ATTR_MPATH_NEXT_HOP, + NL80211_ATTR_MPATH_INFO, + + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + + NL80211_ATTR_MESH_PARAMS, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + NL80211_ATTR_WIPHY_FREQ, + NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS +#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ +#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET + +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_REG_RULES 32 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @__NL80211_IFTYPE_AFTER_LAST: internal use + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + NL80211_IFTYPE_MESH_POINT, + + /* keep last */ + __NL80211_IFTYPE_AFTER_LAST, + NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_flags - station flags + * + * Station flags. When a station is added to an AP interface, it is + * assumed to be already associated (and hence authenticated.) + * + * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) + * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames + * with short barker preamble + * @NL80211_STA_FLAG_WME: station is WME/QoS capable + */ +enum nl80211_sta_flags { + __NL80211_STA_FLAG_INVALID, + NL80211_STA_FLAG_AUTHORIZED, + NL80211_STA_FLAG_SHORT_PREAMBLE, + NL80211_STA_FLAG_WME, + + /* keep last */ + __NL80211_STA_FLAG_AFTER_LAST, + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_info - station information + * + * These attribute types are used with %NL80211_ATTR_STA_INFO + * when getting information about a station. + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, + NL80211_STA_INFO_INACTIVE_TIME, + NL80211_STA_INFO_RX_BYTES, + NL80211_STA_INFO_TX_BYTES, + NL80211_STA_INFO_LLID, + NL80211_STA_INFO_PLID, + NL80211_STA_INFO_PLINK_STATE, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, + NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active + * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running + * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN + * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set + * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded + */ +enum nl80211_mpath_flags { + NL80211_MPATH_FLAG_ACTIVE = 1<<0, + NL80211_MPATH_FLAG_RESOLVING = 1<<1, + NL80211_MPATH_FLAG_DSN_VALID = 1<<2, + NL80211_MPATH_FLAG_FIXED = 1<<3, + NL80211_MPATH_FLAG_RESOLVED = 1<<4, +}; + +/** + * enum nl80211_mpath_info - mesh path information + * + * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting + * information about a mesh path. + * + * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved + * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination + * @NL80211_ATTR_MPATH_DSN: destination sequence number + * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path + * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now + * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in + * &enum nl80211_mpath_flags; + * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries + */ +enum nl80211_mpath_info { + __NL80211_MPATH_INFO_INVALID, + NL80211_MPATH_INFO_FRAME_QLEN, + NL80211_MPATH_INFO_DSN, + NL80211_MPATH_INFO_METRIC, + NL80211_MPATH_INFO_EXPTIME, + NL80211_MPATH_INFO_FLAGS, + NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, + NL80211_MPATH_INFO_DISCOVERY_RETRIES, + + /* keep last */ + __NL80211_MPATH_INFO_AFTER_LAST, + NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, + * an array of nested frequency attributes + * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, + * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + */ +enum nl80211_band_attr { + __NL80211_BAND_ATTR_INVALID, + NL80211_BAND_ATTR_FREQS, + NL80211_BAND_ATTR_RATES, + + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + +/** + * enum nl80211_frequency_attr - frequency attributes + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz + * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current + * regulatory domain. + * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is + * permitted on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). + */ +enum nl80211_frequency_attr { + __NL80211_FREQUENCY_ATTR_INVALID, + NL80211_FREQUENCY_ATTR_FREQ, + NL80211_FREQUENCY_ATTR_DISABLED, + NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, + NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, + NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER + +/** + * enum nl80211_bitrate_attr - bitrate attributes + * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps + * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported + * in 2.4 GHz band. + */ +enum nl80211_bitrate_attr { + __NL80211_BITRATE_ATTR_INVALID, + NL80211_BITRATE_ATTR_RATE, + NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, + + /* keep last */ + __NL80211_BITRATE_ATTR_AFTER_LAST, + NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + +/** + * enum nl80211_mntr_flags - monitor configuration flags + * + * Monitor configuration flags. + * + * @__NL80211_MNTR_FLAG_INVALID: reserved + * + * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS + * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @NL80211_MNTR_FLAG_CONTROL: pass control frames + * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering + * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. + * overrides all other flags. + * + * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use + * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag + */ +enum nl80211_mntr_flags { + __NL80211_MNTR_FLAG_INVALID, + NL80211_MNTR_FLAG_FCSFAIL, + NL80211_MNTR_FLAG_PLCPFAIL, + NL80211_MNTR_FLAG_CONTROL, + NL80211_MNTR_FLAG_OTHER_BSS, + NL80211_MNTR_FLAG_COOK_FRAMES, + + /* keep last */ + __NL80211_MNTR_FLAG_AFTER_LAST, + NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically + * open peer links when we detect compatible mesh peers. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the mesh + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_txq_q { + NL80211_TXQ_Q_VO, + NL80211_TXQ_Q_VI, + NL80211_TXQ_Q_BE, + NL80211_TXQ_Q_BK +}; + +enum nl80211_sec_chan_offset { + NL80211_SEC_CHAN_NO_HT /* No HT */, + NL80211_SEC_CHAN_DISABLED /* HT20 only */, + NL80211_SEC_CHAN_BELOW /* HT40- */, + NL80211_SEC_CHAN_ABOVE /* HT40+ */ +}; +#endif /* __LINUX_NL80211_H */ diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c index 7037dcdcd..59ef1d7f4 100644 --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include "nl80211_copy.h" #ifdef CONFIG_CLIENT_MLME #include #include