diff --git a/src/ap/hostapd.h b/src/ap/hostapd.h index df3ade06f..3f79413d6 100644 --- a/src/ap/hostapd.h +++ b/src/ap/hostapd.h @@ -241,6 +241,10 @@ struct hostapd_data { #ifdef CONFIG_INTERWORKING size_t gas_frag_limit; #endif /* CONFIG_INTERWORKING */ +#ifdef CONFIG_MESH + int num_plinks; + int max_plinks; +#endif /* CONFIG_MESH */ #ifdef CONFIG_SQLITE struct hostapd_eap_user tmp_eap_user; diff --git a/src/ap/sta_info.h b/src/ap/sta_info.h index faf32d859..c4c88250a 100644 --- a/src/ap/sta_info.h +++ b/src/ap/sta_info.h @@ -9,6 +9,11 @@ #ifndef STA_INFO_H #define STA_INFO_H +#ifdef CONFIG_MESH +/* needed for mesh_plink_state enum */ +#include "common/defs.h" +#endif /* CONFIG_MESH */ + /* STA flags */ #define WLAN_STA_AUTH BIT(0) #define WLAN_STA_ASSOC BIT(1) @@ -49,6 +54,14 @@ struct sta_info { int supported_rates_len; u8 qosinfo; /* Valid when WLAN_STA_WMM is set */ +#ifdef CONFIG_MESH + enum mesh_plink_state plink_state; + u16 peer_lid; + u16 my_lid; + u16 mpm_close_reason; + int mpm_retries; +#endif /* CONFIG_MESH */ + unsigned int nonerp_set:1; unsigned int no_short_slot_time_set:1; unsigned int no_short_preamble_set:1; diff --git a/src/common/ieee802_11_defs.h b/src/common/ieee802_11_defs.h index 3238bd4a6..f5adbc026 100644 --- a/src/common/ieee802_11_defs.h +++ b/src/common/ieee802_11_defs.h @@ -1124,6 +1124,12 @@ enum wifi_display_subelem { #define MESH_PATH_METRIC_AIRTIME 1 #define MESH_PATH_METRIC_VENDOR 255 +enum plink_action_field { + PLINK_OPEN = 1, + PLINK_CONFIRM, + PLINK_CLOSE +}; + #define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */ #define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */ diff --git a/src/common/wpa_ctrl.h b/src/common/wpa_ctrl.h index e4619a7d5..9c6188cb3 100644 --- a/src/common/wpa_ctrl.h +++ b/src/common/wpa_ctrl.h @@ -118,6 +118,10 @@ extern "C" { #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS " #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG " +/* MESH events */ +#define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED " +#define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED " + /** P2P device found */ #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND " diff --git a/wpa_supplicant/Android.mk b/wpa_supplicant/Android.mk index 48ff99fa6..bfe5215fb 100644 --- a/wpa_supplicant/Android.mk +++ b/wpa_supplicant/Android.mk @@ -199,6 +199,7 @@ ifdef CONFIG_MESH NEED_80211_COMMON=y L_CFLAGS += -DCONFIG_MESH OBJS += mesh.c +OBJS += mesh_mpm.c endif ifdef CONFIG_SAE diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile index b6389b07f..7e19cf841 100644 --- a/wpa_supplicant/Makefile +++ b/wpa_supplicant/Makefile @@ -202,6 +202,7 @@ ifdef CONFIG_MESH NEED_80211_COMMON=y CFLAGS += -DCONFIG_MESH OBJS += mesh.o +OBJS += mesh_mpm.o endif ifdef CONFIG_SAE diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c index 34d8226a4..189dacd0c 100644 --- a/wpa_supplicant/events.c +++ b/wpa_supplicant/events.c @@ -43,6 +43,7 @@ #include "offchannel.h" #include "interworking.h" #include "mesh.h" +#include "mesh_mpm.h" #ifndef CONFIG_NO_SCAN_PROCESSING @@ -2840,6 +2841,8 @@ static void wpas_event_rx_mgmt_action(struct wpa_supplicant *wpa_s, wpas_p2p_rx_action(wpa_s, mgmt->da, mgmt->sa, mgmt->bssid, category, payload, plen, freq); + if (wpa_s->ifmsh) + mesh_mpm_action_rx(wpa_s, mgmt, len); } @@ -3209,7 +3212,9 @@ void wpa_supplicant_event(void *ctx, enum wpa_event_type event, } #endif /* CONFIG_P2P */ #ifdef CONFIG_IBSS_RSN - if (stype == WLAN_FC_STYPE_AUTH && + if (wpa_s->current_ssid && + wpa_s->current_ssid->mode == WPAS_MODE_IBSS && + stype == WLAN_FC_STYPE_AUTH && data->rx_mgmt.frame_len >= 30) { wpa_supplicant_event_ibss_auth(wpa_s, data); break; @@ -3224,6 +3229,11 @@ void wpa_supplicant_event(void *ctx, enum wpa_event_type event, break; } + if (wpa_s->ifmsh) { + mesh_mpm_mgmt_rx(wpa_s, &data->rx_mgmt); + break; + } + wpa_dbg(wpa_s, MSG_DEBUG, "AP: ignore received " "management frame in non-AP mode"); break; diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c index 320440c6a..efacf7081 100644 --- a/wpa_supplicant/mesh.c +++ b/wpa_supplicant/mesh.c @@ -21,6 +21,7 @@ #include "wpa_supplicant_i.h" #include "driver_i.h" #include "notify.h" +#include "mesh_mpm.h" #include "mesh.h" @@ -41,6 +42,7 @@ void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s, return; if (ifmsh->mconf) { + mesh_mpm_deinit(wpa_s, ifmsh); if (ifmsh->mconf->ies) { ifmsh->mconf->ies = NULL; /* We cannot free this struct @@ -117,6 +119,13 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s, static int default_groups[] = { 19, 20, 21, 25, 26, -1 }; size_t len; + if (!wpa_s->conf->user_mpm) { + /* not much for us to do here */ + wpa_msg(wpa_s, MSG_WARNING, + "user_mpm is not enabled in configuration"); + return 0; + } + wpa_s->ifmsh = ifmsh = os_zalloc(sizeof(*wpa_s->ifmsh)); if (!ifmsh) return -ENOMEM; @@ -149,6 +158,7 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s, bss->iconf = conf; ifmsh->conf = conf; + ifmsh->bss[0]->max_plinks = 99; os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface)); mconf = mesh_config_create(ssid); @@ -241,7 +251,9 @@ void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr, if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) { wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR, MAC2STR(addr)); + return; } + wpa_mesh_new_mesh_peer(wpa_s, addr, &elems); } @@ -266,10 +278,16 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s, if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) { params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH; params.flags |= WPA_DRIVER_MESH_FLAG_AMPE; + wpa_s->conf->user_mpm = 1; } - params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM; - params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS; + if (wpa_s->conf->user_mpm) { + params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM; + params.conf.flags &= ~WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS; + } else { + params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM; + params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS; + } if (wpa_supplicant_mesh_init(wpa_s, ssid)) { wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh"); diff --git a/wpa_supplicant/mesh_mpm.c b/wpa_supplicant/mesh_mpm.c new file mode 100644 index 000000000..aa28324dd --- /dev/null +++ b/wpa_supplicant/mesh_mpm.c @@ -0,0 +1,853 @@ +/* + * WPA Supplicant - Basic mesh peer management + * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved. + * + * This software may be distributed under the terms of the BSD license. + * See README for more details. + */ + +#include "utils/includes.h" + +#include "utils/common.h" +#include "utils/eloop.h" +#include "common/ieee802_11_defs.h" +#include "ap/hostapd.h" +#include "ap/sta_info.h" +#include "ap/ieee802_11.h" +#include "wpa_supplicant_i.h" +#include "driver_i.h" +#include "mesh_mpm.h" + +/* TODO make configurable */ +#define dot11MeshMaxRetries 10 +#define dot11MeshRetryTimeout 1 +#define dot11MeshConfirmTimeout 1 +#define dot11MeshHoldingTimeout 1 + +struct mesh_peer_mgmt_ie { + const u8 *proto_id; + const u8 *llid; + const u8 *plid; + const u8 *reason; + const u8 *pmk; +}; + +static void plink_timer(void *eloop_ctx, void *user_data); + + +enum plink_event { + PLINK_UNDEFINED, + OPN_ACPT, + OPN_RJCT, + OPN_IGNR, + CNF_ACPT, + CNF_RJCT, + CNF_IGNR, + CLS_ACPT, + CLS_IGNR +}; + +static const char * const mplstate[] = { + [PLINK_LISTEN] = "LISTEN", + [PLINK_OPEN_SENT] = "OPEN_SENT", + [PLINK_OPEN_RCVD] = "OPEN_RCVD", + [PLINK_CNF_RCVD] = "CNF_RCVD", + [PLINK_ESTAB] = "ESTAB", + [PLINK_HOLDING] = "HOLDING", + [PLINK_BLOCKED] = "BLOCKED" +}; + +static const char * const mplevent[] = { + [PLINK_UNDEFINED] = "UNDEFINED", + [OPN_ACPT] = "OPN_ACPT", + [OPN_RJCT] = "OPN_RJCT", + [OPN_IGNR] = "OPN_IGNR", + [CNF_ACPT] = "CNF_ACPT", + [CNF_RJCT] = "CNF_RJCT", + [CNF_IGNR] = "CNF_IGNR", + [CLS_ACPT] = "CLS_ACPT", + [CLS_IGNR] = "CLS_IGNR" +}; + + +static int mesh_mpm_parse_peer_mgmt(struct wpa_supplicant *wpa_s, + u8 action_field, + const u8 *ie, size_t len, + struct mesh_peer_mgmt_ie *mpm_ie) +{ + os_memset(mpm_ie, 0, sizeof(*mpm_ie)); + + /* remove optional PMK at end */ + if (len >= 16) { + len -= 16; + mpm_ie->pmk = ie + len - 16; + } + + if ((action_field == PLINK_OPEN && len != 4) || + (action_field == PLINK_CONFIRM && len != 6) || + (action_field == PLINK_CLOSE && len != 6 && len != 8)) { + wpa_msg(wpa_s, MSG_DEBUG, "MPM: Invalid peer mgmt ie"); + return -1; + } + + /* required fields */ + if (len < 4) + return -1; + mpm_ie->proto_id = ie; + mpm_ie->llid = ie + 2; + ie += 4; + len -= 4; + + /* close reason is always present at end for close */ + if (action_field == PLINK_CLOSE) { + if (len < 2) + return -1; + mpm_ie->reason = ie + len - 2; + len -= 2; + } + + /* plid, present for confirm, and possibly close */ + if (len) + mpm_ie->plid = ie; + + return 0; +} + + +static int plink_free_count(struct hostapd_data *hapd) +{ + if (hapd->max_plinks > hapd->num_plinks) + return hapd->max_plinks - hapd->num_plinks; + return 0; +} + + +static u16 copy_supp_rates(struct wpa_supplicant *wpa_s, + struct sta_info *sta, + struct ieee802_11_elems *elems) +{ + if (!elems->supp_rates) { + wpa_msg(wpa_s, MSG_ERROR, "no supported rates from " MACSTR, + MAC2STR(sta->addr)); + return WLAN_STATUS_UNSPECIFIED_FAILURE; + } + + if (elems->supp_rates_len + elems->ext_supp_rates_len > + sizeof(sta->supported_rates)) { + wpa_msg(wpa_s, MSG_ERROR, + "Invalid supported rates element length " MACSTR + " %d+%d", MAC2STR(sta->addr), elems->supp_rates_len, + elems->ext_supp_rates_len); + return WLAN_STATUS_UNSPECIFIED_FAILURE; + } + + sta->supported_rates_len = merge_byte_arrays( + sta->supported_rates, sizeof(sta->supported_rates), + elems->supp_rates, elems->supp_rates_len, + elems->ext_supp_rates, elems->ext_supp_rates_len); + + return WLAN_STATUS_SUCCESS; +} + + +/* return true if elems from a neighbor match this MBSS */ +static Boolean matches_local(struct wpa_supplicant *wpa_s, + struct ieee802_11_elems *elems) +{ + struct mesh_conf *mconf = wpa_s->ifmsh->mconf; + + if (elems->mesh_config_len < 5) + return FALSE; + + return (mconf->meshid_len == elems->mesh_id_len && + os_memcmp(mconf->meshid, elems->mesh_id, + elems->mesh_id_len) == 0 && + mconf->mesh_pp_id == elems->mesh_config[0] && + mconf->mesh_pm_id == elems->mesh_config[1] && + mconf->mesh_cc_id == elems->mesh_config[2] && + mconf->mesh_sp_id == elems->mesh_config[3] && + mconf->mesh_auth_id == elems->mesh_config[4]); +} + + +/* check if local link id is already used with another peer */ +static Boolean llid_in_use(struct wpa_supplicant *wpa_s, u16 llid) +{ + struct sta_info *sta; + struct hostapd_data *hapd = wpa_s->ifmsh->bss[0]; + + for (sta = hapd->sta_list; sta; sta = sta->next) { + if (sta->my_lid == llid) + return TRUE; + } + + return FALSE; +} + + +/* generate an llid for a link and set to initial state */ +static void mesh_mpm_init_link(struct wpa_supplicant *wpa_s, + struct sta_info *sta) +{ + u16 llid; + + do { + if (os_get_random((u8 *) &llid, sizeof(llid)) < 0) + continue; + } while (!llid || llid_in_use(wpa_s, llid)); + + sta->my_lid = llid; + sta->peer_lid = 0; + sta->plink_state = PLINK_LISTEN; +} + + +static void mesh_mpm_send_plink_action(struct wpa_supplicant *wpa_s, + struct sta_info *sta, + enum plink_action_field type, + u16 close_reason) +{ + struct wpabuf *buf; + struct hostapd_iface *ifmsh = wpa_s->ifmsh; + struct hostapd_data *bss = ifmsh->bss[0]; + struct mesh_conf *conf = ifmsh->mconf; + u8 supp_rates[2 + 2 + 32]; + u8 *pos; + u8 ie_len, add_plid = 0; + int ret; + int ampe = conf->security & MESH_CONF_SEC_AMPE; + + if (!sta) + return; + + buf = wpabuf_alloc(2 + /* capability info */ + 2 + /* AID */ + 2 + 8 + /* supported rates */ + 2 + (32 - 8) + + 2 + 32 + /* mesh ID */ + 2 + 7 + /* mesh config */ + 2 + 26 + /* HT capabilities */ + 2 + 22 + /* HT operation */ + 2 + 23 + /* peering management */ + 2 + 96 + /* AMPE */ + 2 + 16); /* MIC */ + if (!buf) + return; + + wpabuf_put_u8(buf, WLAN_ACTION_SELF_PROTECTED); + wpabuf_put_u8(buf, type); + + if (type != PLINK_CLOSE) { + /* capability info */ + wpabuf_put_le16(buf, ampe ? IEEE80211_CAP_PRIVACY : 0); + + if (type == PLINK_CONFIRM) + wpabuf_put_le16(buf, sta->peer_lid); + + /* IE: supp + ext. supp rates */ + pos = hostapd_eid_supp_rates(bss, supp_rates); + pos = hostapd_eid_ext_supp_rates(bss, pos); + wpabuf_put_data(buf, supp_rates, pos - supp_rates); + + /* IE: Mesh ID */ + wpabuf_put_u8(buf, WLAN_EID_MESH_ID); + wpabuf_put_u8(buf, conf->meshid_len); + wpabuf_put_data(buf, conf->meshid, conf->meshid_len); + + /* IE: mesh conf */ + wpabuf_put_u8(buf, WLAN_EID_MESH_CONFIG); + wpabuf_put_u8(buf, 7); + wpabuf_put_u8(buf, conf->mesh_pp_id); + wpabuf_put_u8(buf, conf->mesh_pm_id); + wpabuf_put_u8(buf, conf->mesh_cc_id); + wpabuf_put_u8(buf, conf->mesh_sp_id); + wpabuf_put_u8(buf, conf->mesh_auth_id); + /* TODO: formation info */ + wpabuf_put_u8(buf, 0); + /* always forwarding & accepting plinks for now */ + wpabuf_put_u8(buf, 0x1 | 0x8); + } else { /* Peer closing frame */ + /* IE: Mesh ID */ + wpabuf_put_u8(buf, WLAN_EID_MESH_ID); + wpabuf_put_u8(buf, conf->meshid_len); + wpabuf_put_data(buf, conf->meshid, conf->meshid_len); + } + + /* IE: Mesh Peering Management element */ + ie_len = 4; + if (ampe) + ie_len += PMKID_LEN; + switch (type) { + case PLINK_OPEN: + break; + case PLINK_CONFIRM: + ie_len += 2; + add_plid = 1; + break; + case PLINK_CLOSE: + ie_len += 2; + add_plid = 1; + ie_len += 2; /* reason code */ + break; + } + + wpabuf_put_u8(buf, WLAN_EID_PEER_MGMT); + wpabuf_put_u8(buf, ie_len); + /* peering protocol */ + if (ampe) + wpabuf_put_le16(buf, 1); + else + wpabuf_put_le16(buf, 0); + wpabuf_put_le16(buf, sta->my_lid); + if (add_plid) + wpabuf_put_le16(buf, sta->peer_lid); + if (type == PLINK_CLOSE) + wpabuf_put_le16(buf, close_reason); + + /* TODO HT IEs */ + + ret = wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, + sta->addr, wpa_s->own_addr, wpa_s->own_addr, + wpabuf_head(buf), wpabuf_len(buf), 0); + if (ret < 0) + wpa_msg(wpa_s, MSG_INFO, + "Mesh MPM: failed to send peering frame"); + + wpabuf_free(buf); +} + + +/* configure peering state in ours and driver's station entry */ +static void +wpa_mesh_set_plink_state(struct wpa_supplicant *wpa_s, struct sta_info *sta, + enum mesh_plink_state state) +{ + struct hostapd_sta_add_params params; + int ret; + + sta->plink_state = state; + + os_memset(¶ms, 0, sizeof(params)); + params.addr = sta->addr; + params.plink_state = state; + params.set = 1; + + wpa_msg(wpa_s, MSG_DEBUG, "MPM set " MACSTR " into %s", + MAC2STR(sta->addr), mplstate[state]); + ret = wpa_drv_sta_add(wpa_s, ¶ms); + if (ret) { + wpa_msg(wpa_s, MSG_ERROR, "Driver failed to set " MACSTR + ": %d", MAC2STR(sta->addr), ret); + } +} + + +static void mesh_mpm_fsm_restart(struct wpa_supplicant *wpa_s, + struct sta_info *sta) +{ + struct hostapd_data *hapd = wpa_s->ifmsh->bss[0]; + + eloop_cancel_timeout(plink_timer, wpa_s, sta); + + if (sta->mpm_close_reason == WLAN_REASON_MESH_CLOSE_RCVD) { + ap_free_sta(hapd, sta); + return; + } + + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_LISTEN); + sta->my_lid = sta->peer_lid = sta->mpm_close_reason = 0; + sta->mpm_retries = 0; +} + + +static void plink_timer(void *eloop_ctx, void *user_data) +{ + struct wpa_supplicant *wpa_s = eloop_ctx; + struct sta_info *sta = user_data; + u16 reason = 0; + + switch (sta->plink_state) { + case PLINK_OPEN_RCVD: + case PLINK_OPEN_SENT: + /* retry timer */ + if (sta->mpm_retries < dot11MeshMaxRetries) { + eloop_register_timeout(dot11MeshRetryTimeout, 0, + plink_timer, wpa_s, sta); + mesh_mpm_send_plink_action(wpa_s, sta, PLINK_OPEN, 0); + sta->mpm_retries++; + break; + } + reason = WLAN_REASON_MESH_MAX_RETRIES; + /* fall through on else */ + + case PLINK_CNF_RCVD: + /* confirm timer */ + if (!reason) + reason = WLAN_REASON_MESH_CONFIRM_TIMEOUT; + sta->plink_state = PLINK_HOLDING; + eloop_register_timeout(dot11MeshHoldingTimeout, 0, + plink_timer, wpa_s, sta); + mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CLOSE, reason); + break; + case PLINK_HOLDING: + /* holding timer */ + mesh_mpm_fsm_restart(wpa_s, sta); + break; + default: + break; + } +} + + +/* initiate peering with station */ +static void +mesh_mpm_plink_open(struct wpa_supplicant *wpa_s, struct sta_info *sta, + enum mesh_plink_state next_state) +{ + eloop_cancel_timeout(plink_timer, wpa_s, sta); + eloop_register_timeout(dot11MeshRetryTimeout, 0, plink_timer, + wpa_s, sta); + mesh_mpm_send_plink_action(wpa_s, sta, PLINK_OPEN, 0); + wpa_mesh_set_plink_state(wpa_s, sta, next_state); +} + + +int mesh_mpm_plink_close(struct hostapd_data *hapd, + struct sta_info *sta, void *ctx) +{ + struct wpa_supplicant *wpa_s = ctx; + int reason = WLAN_REASON_MESH_PEERING_CANCELLED; + + if (sta) { + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING); + mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CLOSE, reason); + wpa_printf(MSG_DEBUG, "MPM closing plink sta=" MACSTR, + MAC2STR(sta->addr)); + eloop_cancel_timeout(plink_timer, wpa_s, sta); + return 0; + } + + return 1; +} + + +void mesh_mpm_deinit(struct wpa_supplicant *wpa_s, struct hostapd_iface *ifmsh) +{ + struct hostapd_data *hapd = ifmsh->bss[0]; + + /* notify peers we're leaving */ + ap_for_each_sta(hapd, mesh_mpm_plink_close, wpa_s); + + hapd->num_plinks = 0; + hostapd_free_stas(hapd); +} + + +/* for mesh_rsn to indicate this peer has completed authentication, and we're + * ready to start AMPE */ +void mesh_mpm_auth_peer(struct wpa_supplicant *wpa_s, const u8 *addr) +{ + struct hostapd_data *data = wpa_s->ifmsh->bss[0]; + struct hostapd_sta_add_params params; + struct sta_info *sta; + int ret; + + sta = ap_get_sta(data, addr); + if (!sta) { + wpa_msg(wpa_s, MSG_DEBUG, "no such mesh peer"); + return; + } + + /* TODO: Should do nothing if this STA is already authenticated, but + * the AP code already sets this flag. */ + sta->flags |= WLAN_STA_AUTH; + + os_memset(¶ms, 0, sizeof(params)); + params.addr = sta->addr; + params.flags = WPA_STA_AUTHENTICATED | WPA_STA_AUTHORIZED; + params.set = 1; + + wpa_msg(wpa_s, MSG_DEBUG, "MPM authenticating " MACSTR, + MAC2STR(sta->addr)); + ret = wpa_drv_sta_add(wpa_s, ¶ms); + if (ret) { + wpa_msg(wpa_s, MSG_ERROR, + "Driver failed to set " MACSTR ": %d", + MAC2STR(sta->addr), ret); + } + + if (!sta->my_lid) + mesh_mpm_init_link(wpa_s, sta); + + mesh_mpm_plink_open(wpa_s, sta, PLINK_OPEN_SENT); +} + + +void wpa_mesh_new_mesh_peer(struct wpa_supplicant *wpa_s, const u8 *addr, + struct ieee802_11_elems *elems) +{ + struct hostapd_sta_add_params params; + struct mesh_conf *conf = wpa_s->ifmsh->mconf; + struct hostapd_data *data = wpa_s->ifmsh->bss[0]; + struct sta_info *sta; + int ret = 0; + + sta = ap_get_sta(data, addr); + if (!sta) { + sta = ap_sta_add(data, addr); + if (!sta) + return; + } + + /* initialize sta */ + if (copy_supp_rates(wpa_s, sta, elems)) + return; + + mesh_mpm_init_link(wpa_s, sta); + + /* insert into driver */ + os_memset(¶ms, 0, sizeof(params)); + params.supp_rates = sta->supported_rates; + params.supp_rates_len = sta->supported_rates_len; + params.addr = addr; + params.plink_state = sta->plink_state; + params.aid = sta->peer_lid; + params.listen_interval = 100; + /* TODO: HT capabilities */ + params.flags |= WPA_STA_WMM; + params.flags_mask |= WPA_STA_AUTHENTICATED; + if (conf->security == MESH_CONF_SEC_NONE) { + params.flags |= WPA_STA_AUTHORIZED; + params.flags |= WPA_STA_AUTHENTICATED; + } else { + sta->flags |= WLAN_STA_MFP; + params.flags |= WPA_STA_MFP; + } + + ret = wpa_drv_sta_add(wpa_s, ¶ms); + if (ret) { + wpa_msg(wpa_s, MSG_ERROR, + "Driver failed to insert " MACSTR ": %d", + MAC2STR(addr), ret); + return; + } + + mesh_mpm_plink_open(wpa_s, sta, PLINK_OPEN_SENT); +} + + +void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s, struct rx_mgmt *rx_mgmt) +{ + struct hostapd_frame_info fi; + + os_memset(&fi, 0, sizeof(fi)); + fi.datarate = rx_mgmt->datarate; + fi.ssi_signal = rx_mgmt->ssi_signal; + ieee802_11_mgmt(wpa_s->ifmsh->bss[0], rx_mgmt->frame, + rx_mgmt->frame_len, &fi); +} + + +static void mesh_mpm_plink_estab(struct wpa_supplicant *wpa_s, + struct sta_info *sta) +{ + struct hostapd_data *hapd = wpa_s->ifmsh->bss[0]; + + wpa_msg(wpa_s, MSG_INFO, "mesh plink with " MACSTR " established", + MAC2STR(sta->addr)); + + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_ESTAB); + hapd->num_plinks++; + + sta->flags |= WLAN_STA_ASSOC; + + eloop_cancel_timeout(plink_timer, wpa_s, sta); + + /* Send ctrl event */ + wpa_msg_ctrl(wpa_s, MSG_INFO, MESH_PEER_CONNECTED MACSTR, + MAC2STR(sta->addr)); +} + + +static void mesh_mpm_fsm(struct wpa_supplicant *wpa_s, struct sta_info *sta, + enum plink_event event) +{ + struct hostapd_data *hapd = wpa_s->ifmsh->bss[0]; + u16 reason = 0; + + wpa_msg(wpa_s, MSG_DEBUG, "MPM " MACSTR " state %s event %s", + MAC2STR(sta->addr), mplstate[sta->plink_state], + mplevent[event]); + + switch (sta->plink_state) { + case PLINK_LISTEN: + switch (event) { + case CLS_ACPT: + mesh_mpm_fsm_restart(wpa_s, sta); + break; + case OPN_ACPT: + mesh_mpm_plink_open(wpa_s, sta, PLINK_OPEN_RCVD); + mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CONFIRM, + 0); + break; + default: + break; + } + break; + case PLINK_OPEN_SENT: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION; + /* fall-through */ + case CLS_ACPT: + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING); + if (!reason) + reason = WLAN_REASON_MESH_CLOSE_RCVD; + eloop_register_timeout(dot11MeshHoldingTimeout, 0, + plink_timer, wpa_s, sta); + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CLOSE, reason); + break; + case OPN_ACPT: + /* retry timer is left untouched */ + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_OPEN_RCVD); + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CONFIRM, 0); + break; + case CNF_ACPT: + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_CNF_RCVD); + eloop_register_timeout(dot11MeshConfirmTimeout, 0, + plink_timer, wpa_s, sta); + break; + default: + break; + } + break; + case PLINK_OPEN_RCVD: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION; + /* fall-through */ + case CLS_ACPT: + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING); + if (!reason) + reason = WLAN_REASON_MESH_CLOSE_RCVD; + eloop_register_timeout(dot11MeshHoldingTimeout, 0, + plink_timer, wpa_s, sta); + sta->mpm_close_reason = reason; + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CLOSE, reason); + break; + case OPN_ACPT: + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CONFIRM, 0); + break; + case CNF_ACPT: + mesh_mpm_plink_estab(wpa_s, sta); + break; + default: + break; + } + break; + case PLINK_CNF_RCVD: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION; + /* fall-through */ + case CLS_ACPT: + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING); + if (!reason) + reason = WLAN_REASON_MESH_CLOSE_RCVD; + eloop_register_timeout(dot11MeshHoldingTimeout, 0, + plink_timer, wpa_s, sta); + sta->mpm_close_reason = reason; + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CLOSE, reason); + break; + case OPN_ACPT: + mesh_mpm_plink_estab(wpa_s, sta); + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CONFIRM, 0); + break; + default: + break; + } + break; + case PLINK_ESTAB: + switch (event) { + case CLS_ACPT: + wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING); + reason = WLAN_REASON_MESH_CLOSE_RCVD; + + eloop_register_timeout(dot11MeshHoldingTimeout, 0, + plink_timer, wpa_s, sta); + sta->mpm_close_reason = reason; + + wpa_msg(wpa_s, MSG_INFO, "mesh plink with " MACSTR + " closed with reason %d", + MAC2STR(sta->addr), reason); + + wpa_msg_ctrl(wpa_s, MSG_INFO, + MESH_PEER_DISCONNECTED MACSTR, + MAC2STR(sta->addr)); + + hapd->num_plinks--; + + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CLOSE, reason); + break; + case OPN_ACPT: + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CONFIRM, 0); + break; + default: + break; + } + break; + case PLINK_HOLDING: + switch (event) { + case CLS_ACPT: + mesh_mpm_fsm_restart(wpa_s, sta); + break; + case OPN_ACPT: + case CNF_ACPT: + case OPN_RJCT: + case CNF_RJCT: + reason = sta->mpm_close_reason; + mesh_mpm_send_plink_action(wpa_s, sta, + PLINK_CLOSE, reason); + break; + default: + break; + } + break; + default: + wpa_msg(wpa_s, MSG_DEBUG, + "Unsupported MPM event %s for state %s", + mplevent[event], mplstate[sta->plink_state]); + break; + } +} + + +void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s, + const struct ieee80211_mgmt *mgmt, size_t len) +{ + u8 action_field; + struct hostapd_data *hapd = wpa_s->ifmsh->bss[0]; + struct sta_info *sta; + u16 plid = 0, llid = 0; + enum plink_event event; + struct ieee802_11_elems elems; + struct mesh_peer_mgmt_ie peer_mgmt_ie; + const u8 *ies; + size_t ie_len; + int ret; + + if (mgmt->u.action.category != WLAN_ACTION_SELF_PROTECTED) + return; + + action_field = mgmt->u.action.u.slf_prot_action.action; + + ies = mgmt->u.action.u.slf_prot_action.variable; + ie_len = (const u8 *) mgmt + len - + mgmt->u.action.u.slf_prot_action.variable; + + /* at least expect mesh id and peering mgmt */ + if (ie_len < 2 + 2) + return; + + if (action_field == PLINK_OPEN || action_field == PLINK_CONFIRM) { + ies += 2; /* capability */ + ie_len -= 2; + } + if (action_field == PLINK_CONFIRM) { + ies += 2; /* aid */ + ie_len -= 2; + } + + /* check for mesh peering, mesh id and mesh config IEs */ + if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) + return; + if (!elems.peer_mgmt) + return; + if ((action_field != PLINK_CLOSE) && + (!elems.mesh_id || !elems.mesh_config)) + return; + + if (action_field != PLINK_CLOSE && !matches_local(wpa_s, &elems)) + return; + + ret = mesh_mpm_parse_peer_mgmt(wpa_s, action_field, + elems.peer_mgmt, + elems.peer_mgmt_len, + &peer_mgmt_ie); + if (ret) + return; + + /* the sender's llid is our plid and vice-versa */ + plid = WPA_GET_LE16(peer_mgmt_ie.llid); + if (peer_mgmt_ie.plid) + llid = WPA_GET_LE16(peer_mgmt_ie.plid); + + sta = ap_get_sta(hapd, mgmt->sa); + if (!sta) + return; + + if (!sta->my_lid) + mesh_mpm_init_link(wpa_s, sta); + + if (sta->plink_state == PLINK_BLOCKED) + return; + + /* Now we will figure out the appropriate event... */ + switch (action_field) { + case PLINK_OPEN: + if (!plink_free_count(hapd) || + (sta->peer_lid && sta->peer_lid != plid)) { + event = OPN_IGNR; + } else { + sta->peer_lid = plid; + event = OPN_ACPT; + } + break; + case PLINK_CONFIRM: + if (!plink_free_count(hapd) || + sta->my_lid != llid || + (sta->peer_lid && sta->peer_lid != plid)) { + event = CNF_IGNR; + } else { + if (!sta->peer_lid) + sta->peer_lid = plid; + event = CNF_ACPT; + } + break; + case PLINK_CLOSE: + if (sta->plink_state == PLINK_ESTAB) + /* Do not check for llid or plid. This does not + * follow the standard but since multiple plinks + * per cand are not supported, it is necessary in + * order to avoid a livelock when MP A sees an + * establish peer link to MP B but MP B does not + * see it. This can be caused by a timeout in + * B's peer link establishment or B being + * restarted. + */ + event = CLS_ACPT; + else if (sta->peer_lid != plid) + event = CLS_IGNR; + else if (peer_mgmt_ie.plid && sta->my_lid != llid) + event = CLS_IGNR; + else + event = CLS_ACPT; + break; + default: + wpa_msg(wpa_s, MSG_ERROR, + "Mesh plink: unknown frame subtype"); + return; + } + mesh_mpm_fsm(wpa_s, sta, event); +} diff --git a/wpa_supplicant/mesh_mpm.h b/wpa_supplicant/mesh_mpm.h new file mode 100644 index 000000000..056cedd5d --- /dev/null +++ b/wpa_supplicant/mesh_mpm.h @@ -0,0 +1,39 @@ +/* + * WPA Supplicant - Basic mesh peer management + * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved. + * + * This software may be distributed under the terms of the BSD license. + * See README for more details. + */ + +#ifndef MESH_MPM_H +#define MESH_MPM_H + +/* notify MPM of new mesh peer to be inserted in MPM and driver */ +void wpa_mesh_new_mesh_peer(struct wpa_supplicant *wpa_s, const u8 *addr, + struct ieee802_11_elems *elems); +void mesh_mpm_deinit(struct wpa_supplicant *wpa_s, struct hostapd_iface *ifmsh); +void mesh_mpm_auth_peer(struct wpa_supplicant *wpa_s, const u8 *addr); + +#ifdef CONFIG_MESH + +void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s, + const struct ieee80211_mgmt *mgmt, size_t len); +void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s, struct rx_mgmt *rx_mgmt); + +#else /* CONFIG_MESH */ + +static inline void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s, + const struct ieee80211_mgmt *mgmt, + size_t len) +{ +} + +static inline void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s, + struct rx_mgmt *rx_mgmt) +{ +} + +#endif /* CONFIG_MESH */ + +#endif /* MESH_MPM_H */