jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

hostapd: SET ht_capab support for disabling 40 MHz bandwidth

Browse source 
'hostapd_cli SET ht_capab' only checked for [HT40+] or [HT40-] or both
to be present. Based on the offset + or -, secondary_channel is updated
but HT20/VHT20 mode can be brought up only from config file and can't be
done using the SET command when the current HT mode is HT40+ or HT40-.

When managing AP+STA mode from userspace doing hostapd_cli: "disable ->
set channel, ht_capab -> enable" sequence, channel switch from
HT40/VHT40 to HT20/VHT20 was not possible with this SET ht_capab
limitation.

Cover this additional case by resetting secondary_channel to 0 for
HT20/VHT20 when ht_capab has neither [HT40+] nor [HT40-] present.

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
This commit is contained in:
Sathishkumar Muruganandam 2018-07-25 18:16:20 +05:30 committed by Jouni Malinen
parent 307324bf79
commit 47abe29aa9
1 changed files with 2 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
hostapd/config_file.c
View file

@ -1237,6 +1237,8 @@ static int hostapd_config_ht_capab(struct hostapd_config *conf,
conf->ht_capab |= HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET; conf->ht_capab |= HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET;
conf->ht40_plus_minus_allowed = 1; conf->ht40_plus_minus_allowed = 1;
} }
if (!os_strstr(capab, "[HT40+]") && !os_strstr(capab, "[HT40-]"))
conf->secondary_channel = 0;
if (os_strstr(capab, "[SMPS-STATIC]")) { if (os_strstr(capab, "[SMPS-STATIC]")) {
conf->ht_capab &= ~HT_CAP_INFO_SMPS_MASK; conf->ht_capab &= ~HT_CAP_INFO_SMPS_MASK;
conf->ht_capab |= HT_CAP_INFO_SMPS_STATIC; conf->ht_capab |= HT_CAP_INFO_SMPS_STATIC;