From 3f9a89ca1cd5397165200bd38b8ffdf258df007e Mon Sep 17 00:00:00 2001
From: Sunil Dutt <usdutt@codeaurora.org>
Date: Thu, 7 May 2020 01:16:35 +0530
Subject: [PATCH] Vendor attributes for configuring LDPC, TX STBC, RX STBC
Defines the attributes in SET(GET)_WIFI_CONFIGURATION to dynamically
configure capabilities: LDPC, TX STBC, RX STBC.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
src/common/qca-vendor.h | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index bb133e1c4..9e938c18e 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -2147,6 +2147,42 @@ enum qca_wlan_vendor_attr_config {
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66,
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the LDPC capability of the device. When configured in
+ * the disconnected state, the updated configuration will be considered
+ * for the immediately following connection attempt. If this
+ * configuration is modified while the device is in the connected state,
+ * the LDPC TX will be updated with this configuration immediately,
+ * while the LDPC RX configuration update will take place starting from
+ * the subsequent association attempt.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the TX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * connection is formed with TX STBC enabled and if this configuration
+ * is disabled during that association, the TX will be impacted
+ * immediately. Further connection attempts will disable TX STBC.
+ * However, enabling the TX STBC for a connected session with disabled
+ * capability is not allowed and will fail.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the RX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * configuration is modified in the connected state, there will be no
+ * impact for the current association, but further connection attempts
+ * will use the updated configuration.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =