diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 36db9070f..9d12939b2 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -360,6 +360,11 @@ enum qca_radiotap_vendor_ids {
  *	QCA_WLAN_VENDOR_ATTR_PEER_ADDR and the access category of the packets
  *	in QCA_WLAN_VENDOR_ATTR_AC. The attributes are listed
  *	in enum qca_wlan_vendor_attr_flush_pending.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative
+ *	RF Operating Parameter (RROP) information. The attributes for this
+ *	information are defined in enum qca_wlan_vendor_attr_rrop_info. This is
+ *	intended for use by external Auto Channel Selection applications.
  */
 enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -498,6 +503,7 @@ enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161,
 	/* Flush peer pending data */
 	QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING = 162,
+	QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163,
 };
 
 
@@ -3633,6 +3639,11 @@ enum qca_wlan_vendor_attr_external_acs_event {
 	 * qca_wlan_vendor_attr_external_acs_policy.
 	 */
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13,
+	/* Reference RF Operating Parameter (RROP) availability information
+	 * (u16). It uses values defined in enum
+	 * qca_wlan_vendor_attr_rropavail_info.
+	 */
+	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
@@ -4138,4 +4149,75 @@ enum qca_wlan_vendor_attr_flush_pending {
 	QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST - 1,
 };
 
+/**
+ * enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative
+ * RF Operating Parameter (RROP) information is available, and if so, at which
+ * point in the application-driver interaction sequence it can be retrieved by
+ * the application from the driver. This point may vary by architecture and
+ * other factors. This is a u16 value.
+ */
+enum qca_wlan_vendor_attr_rropavail_info {
+	/* RROP information is unavailable. */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE,
+	/* RROP information is available and the application can retrieve the
+	 * information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS
+	 * event from the driver.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START,
+	/* RROP information is available only after a vendor specific scan
+	 * (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has
+	 * successfully completed. The application can retrieve the information
+	 * after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from
+	 * the driver.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific
+ * Representative RF Operating Parameter (RROP) information. It is sent for the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is
+ * intended for use by external Auto Channel Selection applications. It provides
+ * guidance values for some RF parameters that are used by the system during
+ * operation. These values could vary by channel, band, radio, and so on.
+ */
+enum qca_wlan_vendor_attr_rrop_info {
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0,
+
+	/* Representative Tx Power List (RTPL) which has an array of nested
+	 * values as per attributes in enum qca_wlan_vendor_attr_rtplinst.
+	 */
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1,
+
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX =
+	QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list
+ * entry instances in the Representative Tx Power List (RTPL). It provides
+ * simplified power values intended for helping external Auto channel Selection
+ * applications compare potential Tx power performance between channels, other
+ * operating conditions remaining identical. These values are not necessarily
+ * the actual Tx power values that will be used by the system. They are also not
+ * necessarily the max or average values that will be used. Instead, they are
+ * relative, summarized keys for algorithmic use computed by the driver or
+ * underlying firmware considering a number of vendor specific factors.
+ */
+enum qca_wlan_vendor_attr_rtplinst {
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0,
+
+	/* Primary channel number (u8) */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1,
+	/* Representative Tx power in dBm (s32) with emphasis on throughput. */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2,
+	/* Representative Tx power in dBm (s32) with emphasis on range. */
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3,
+
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX =
+		QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */