AP-side workaround for WNM-Sleep Mode GTK/IGTK reinstallation issues

Normally, WNM-Sleep Mode exit with management frame protection
negotiated would result in the current GTK/IGTK getting added into the
WNM-Sleep Mode Response frame. Some station implementations may have a
vulnerability that results in GTK/IGTK reinstallation based on this
frame being replayed. Add a new hostapd configuration parameter that can
be used to disable that behavior and use EAPOL-Key frames for GTK/IGTK
update instead. This would likely be only used with
wpa_disable_eapol_key_retries=1 that enables a workaround for similar
issues with EAPOL-Key. This is related to station side vulnerabilities
CVE-2017-13087 and CVE-2017-13088. To enable this AP-side workaround,
set wnm_sleep_mode_no_keys=1.

Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen 2017-10-29 17:13:54 +02:00
parent 3f5a1860a8
commit 348c93847a
4 changed files with 18 additions and 1 deletions

View File

@ -3293,6 +3293,8 @@ static int hostapd_config_fill(struct hostapd_config *conf,
#ifdef CONFIG_WNM_AP
} else if (os_strcmp(buf, "wnm_sleep_mode") == 0) {
bss->wnm_sleep_mode = atoi(pos);
} else if (os_strcmp(buf, "wnm_sleep_mode_no_keys") == 0) {
bss->wnm_sleep_mode_no_keys = atoi(pos);
} else if (os_strcmp(buf, "bss_transition") == 0) {
bss->bss_transition = atoi(pos);
#endif /* CONFIG_WNM_AP */

View File

@ -1841,6 +1841,18 @@ own_ip_addr=127.0.0.1
# 1 = enabled (allow stations to use WNM-Sleep Mode)
#wnm_sleep_mode=1
# WNM-Sleep Mode GTK/IGTK workaround
# Normally, WNM-Sleep Mode exit with management frame protection negotiated
# would result in the current GTK/IGTK getting added into the WNM-Sleep Mode
# Response frame. Some station implementations may have a vulnerability that
# results in GTK/IGTK reinstallation based on this frame being replayed. This
# configuration parameter can be used to disable that behavior and use EAPOL-Key
# frames for GTK/IGTK update instead. This would likely be only used with
# wpa_disable_eapol_key_retries=1 that enables a workaround for similar issues
# with EAPOL-Key. This is related to station side vulnerabilities CVE-2017-13087
# and CVE-2017-13088. To enable this AP-side workaround, set the parameter to 1.
#wnm_sleep_mode_no_keys=0
# BSS Transition Management
# 0 = disabled (default)
# 1 = enabled

View File

@ -479,6 +479,7 @@ struct hostapd_bss_config {
int time_advertisement;
char *time_zone;
int wnm_sleep_mode;
int wnm_sleep_mode_no_keys;
int bss_transition;
/* IEEE 802.11u - Interworking */

View File

@ -109,6 +109,7 @@ static int ieee802_11_send_wnmsleep_resp(struct hostapd_data *hapd,
pos = (u8 *)mgmt->u.action.u.wnm_sleep_resp.variable;
/* add key data if MFP is enabled */
if (!wpa_auth_uses_mfp(sta->wpa_sm) ||
hapd->conf->wnm_sleep_mode_no_keys ||
action_type != WNM_SLEEP_MODE_EXIT) {
mgmt->u.action.u.wnm_sleep_resp.keydata_len = 0;
} else {
@ -173,7 +174,8 @@ static int ieee802_11_send_wnmsleep_resp(struct hostapd_data *hapd,
wpa_set_wnmsleep(sta->wpa_sm, 0);
hostapd_drv_wnm_oper(hapd, WNM_SLEEP_EXIT_CONFIRM,
addr, NULL, NULL);
if (!wpa_auth_uses_mfp(sta->wpa_sm))
if (!wpa_auth_uses_mfp(sta->wpa_sm) ||
hapd->conf->wnm_sleep_mode_no_keys)
wpa_wnmsleep_rekey_gtk(sta->wpa_sm);
}
} else