Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2019-08-30. Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
parent
97d2d7ac1a
commit
262b71eead
1 changed files with 88 additions and 3 deletions
|
@ -52,6 +52,11 @@
|
|||
#define NL80211_MULTICAST_GROUP_NAN "nan"
|
||||
#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
|
||||
|
||||
#define NL80211_EDMG_BW_CONFIG_MIN 4
|
||||
#define NL80211_EDMG_BW_CONFIG_MAX 15
|
||||
#define NL80211_EDMG_CHANNELS_MIN 1
|
||||
#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */
|
||||
|
||||
/**
|
||||
* DOC: Station handling
|
||||
*
|
||||
|
@ -234,6 +239,15 @@
|
|||
* use in a FILS shared key connection with PMKSA caching.
|
||||
*/
|
||||
|
||||
/**
|
||||
* DOC: SAE authentication offload
|
||||
*
|
||||
* By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
|
||||
* support offloading SAE authentication for WPA3-Personal networks. In
|
||||
* %NL80211_CMD_CONNECT the password for SAE should be specified using
|
||||
* %NL80211_ATTR_SAE_PASSWORD.
|
||||
*/
|
||||
|
||||
/**
|
||||
* enum nl80211_commands - supported nl80211 commands
|
||||
*
|
||||
|
@ -648,7 +662,9 @@
|
|||
* is used during CSA period.
|
||||
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
|
||||
* command may be used with the corresponding cookie to cancel the wait
|
||||
* time if it is known that it is no longer necessary.
|
||||
* time if it is known that it is no longer necessary. This command is
|
||||
* also sent as an event whenever the driver has completed the off-channel
|
||||
* wait time.
|
||||
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
|
||||
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
|
||||
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
|
||||
|
@ -2341,6 +2357,22 @@ enum nl80211_commands {
|
|||
* should be picking up the lowest tx power, either tx power per-interface
|
||||
* or per-station.
|
||||
*
|
||||
* @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
|
||||
* is used with %NL80211_CMD_CONNECT to provide password for offloading
|
||||
* SAE authentication for WPA3-Personal networks.
|
||||
*
|
||||
* @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
|
||||
*
|
||||
* @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
|
||||
* functionality.
|
||||
*
|
||||
* @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
|
||||
* channel(s) that are allowed to be used for EDMG transmissions.
|
||||
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
|
||||
* @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
|
||||
* the allowed channel bandwidth configurations. (u8 attribute)
|
||||
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
|
||||
*
|
||||
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
||||
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
||||
* @__NL80211_ATTR_AFTER_LAST: internal use
|
||||
|
@ -2794,6 +2826,15 @@ enum nl80211_attrs {
|
|||
NL80211_ATTR_STA_TX_POWER_SETTING,
|
||||
NL80211_ATTR_STA_TX_POWER,
|
||||
|
||||
NL80211_ATTR_SAE_PASSWORD,
|
||||
|
||||
NL80211_ATTR_TWT_RESPONDER,
|
||||
|
||||
NL80211_ATTR_HE_OBSS_PD,
|
||||
|
||||
NL80211_ATTR_WIPHY_EDMG_CHANNELS,
|
||||
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
|
||||
|
||||
/* add attributes here, update the policy in nl80211.c */
|
||||
|
||||
__NL80211_ATTR_AFTER_LAST,
|
||||
|
@ -2844,7 +2885,7 @@ enum nl80211_attrs {
|
|||
#define NL80211_HT_CAPABILITY_LEN 26
|
||||
#define NL80211_VHT_CAPABILITY_LEN 12
|
||||
#define NL80211_HE_MIN_CAPABILITY_LEN 16
|
||||
#define NL80211_HE_MAX_CAPABILITY_LEN 51
|
||||
#define NL80211_HE_MAX_CAPABILITY_LEN 54
|
||||
#define NL80211_MAX_NR_CIPHER_SUITES 5
|
||||
#define NL80211_MAX_NR_AKM_SUITES 2
|
||||
|
||||
|
@ -3175,6 +3216,8 @@ enum nl80211_sta_bss_param {
|
|||
* sent to the station (u64, usec)
|
||||
* @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
|
||||
* @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
|
||||
* @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
|
||||
* of STA's association
|
||||
* @__NL80211_STA_INFO_AFTER_LAST: internal
|
||||
* @NL80211_STA_INFO_MAX: highest possible station info attribute
|
||||
*/
|
||||
|
@ -3221,6 +3264,7 @@ enum nl80211_sta_info {
|
|||
NL80211_STA_INFO_TX_DURATION,
|
||||
NL80211_STA_INFO_AIRTIME_WEIGHT,
|
||||
NL80211_STA_INFO_AIRTIME_LINK_METRIC,
|
||||
NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_STA_INFO_AFTER_LAST,
|
||||
|
@ -3402,6 +3446,12 @@ enum nl80211_band_iftype_attr {
|
|||
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
|
||||
* @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
|
||||
* attributes from &enum nl80211_band_iftype_attr
|
||||
* @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
|
||||
* channel(s) that are allowed to be used for EDMG transmissions.
|
||||
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
|
||||
* @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
|
||||
* the allowed channel bandwidth configurations.
|
||||
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
|
||||
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
|
||||
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
|
||||
*/
|
||||
|
@ -3419,6 +3469,9 @@ enum nl80211_band_attr {
|
|||
NL80211_BAND_ATTR_VHT_CAPA,
|
||||
NL80211_BAND_ATTR_IFTYPE_DATA,
|
||||
|
||||
NL80211_BAND_ATTR_EDMG_CHANNELS,
|
||||
NL80211_BAND_ATTR_EDMG_BW_CONFIG,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_BAND_ATTR_AFTER_LAST,
|
||||
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
|
||||
|
@ -3817,6 +3870,8 @@ enum nl80211_user_reg_hint_type {
|
|||
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
|
||||
* (on this channel or globally)
|
||||
* @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
|
||||
* @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
|
||||
* receiving frames destined to the local BSS
|
||||
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
|
||||
* currently defined
|
||||
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
|
||||
|
@ -3833,6 +3888,7 @@ enum nl80211_survey_info {
|
|||
NL80211_SURVEY_INFO_TIME_TX,
|
||||
NL80211_SURVEY_INFO_TIME_SCAN,
|
||||
NL80211_SURVEY_INFO_PAD,
|
||||
NL80211_SURVEY_INFO_TIME_BSS_RX,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_SURVEY_INFO_AFTER_LAST,
|
||||
|
@ -4406,6 +4462,7 @@ enum nl80211_mfp {
|
|||
enum nl80211_wpa_versions {
|
||||
NL80211_WPA_VERSION_1 = 1 << 0,
|
||||
NL80211_WPA_VERSION_2 = 1 << 1,
|
||||
NL80211_WPA_VERSION_3 = 1 << 2,
|
||||
};
|
||||
|
||||
/**
|
||||
|
@ -4516,6 +4573,7 @@ enum nl80211_txrate_gi {
|
|||
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
|
||||
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
|
||||
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
|
||||
* @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
|
||||
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
|
||||
* since newer kernel versions may support more bands
|
||||
*/
|
||||
|
@ -4523,6 +4581,7 @@ enum nl80211_band {
|
|||
NL80211_BAND_2GHZ,
|
||||
NL80211_BAND_5GHZ,
|
||||
NL80211_BAND_60GHZ,
|
||||
NL80211_BAND_6GHZ,
|
||||
|
||||
NUM_NL80211_BANDS,
|
||||
};
|
||||
|
@ -5314,7 +5373,7 @@ enum nl80211_feature_flags {
|
|||
NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
|
||||
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
|
||||
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
|
||||
NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
|
||||
NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,
|
||||
};
|
||||
|
||||
/**
|
||||
|
@ -5422,6 +5481,9 @@ enum nl80211_feature_flags {
|
|||
* @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
|
||||
* to a station.
|
||||
*
|
||||
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
|
||||
* station mode (SAE password is passed as part of the connect command).
|
||||
*
|
||||
* @NUM_NL80211_EXT_FEATURES: number of extended features.
|
||||
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
|
||||
*/
|
||||
|
@ -5466,6 +5528,7 @@ enum nl80211_ext_feature_index {
|
|||
NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
|
||||
NL80211_EXT_FEATURE_EXT_KEY_ID,
|
||||
NL80211_EXT_FEATURE_STA_TX_PWR,
|
||||
NL80211_EXT_FEATURE_SAE_OFFLOAD,
|
||||
|
||||
/* add new features before the definition below */
|
||||
NUM_NL80211_EXT_FEATURES,
|
||||
|
@ -6464,4 +6527,26 @@ enum nl80211_peer_measurement_ftm_resp {
|
|||
NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
|
||||
};
|
||||
|
||||
/**
|
||||
* enum nl80211_obss_pd_attributes - OBSS packet detection attributes
|
||||
* @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
|
||||
*
|
||||
* @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
|
||||
* @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
|
||||
*
|
||||
* @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
|
||||
* @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
|
||||
*/
|
||||
enum nl80211_obss_pd_attributes {
|
||||
__NL80211_HE_OBSS_PD_ATTR_INVALID,
|
||||
|
||||
NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
|
||||
NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_HE_OBSS_PD_ATTR_LAST,
|
||||
NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
|
||||
};
|
||||
|
||||
|
||||
#endif /* __LINUX_NL80211_H */
|
||||
|
|
Loading…
Reference in a new issue