jeltz
/
hostap
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add extra parameters to vendor command GPIO attribute 

Add extra parameters mux_config, drive, and init_enable
to the GPIO config command.

Signed-off-by: Nandha Kishore Easwaran <nandhaki@codeaurora.org>
This commit is contained in:
Nandha Kishore Easwaran 2020-11-11 18:38:02 +05:30 committed by Jouni Malinen
parent d0e0d2283e
commit 1934ad9b23
1 changed files with 63 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
src/common/qca-vendor.h
View File

@ -2438,23 +2438,50 @@ enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_OUTPUT.
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Optional (u32)
* value to specify the GPIO pull type. Please refer to enum qca_gpio_pull_type
* for the available values.
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG.
* %QCA_WLAN_VENDOR_GPIO_CONFIG and
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
* attribute is present.
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Optional (u32)
* value to specify the GPIO interrupt mode. Please refer to enum
* qca_gpio_interrupt_mode for the available values.
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG.
* %QCA_WLAN_VENDOR_GPIO_CONFIG and
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
* attribute is present.
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Required (u32)
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Optional (u32)
* value to specify the GPIO direction. Please refer to enum qca_gpio_direction
* for the available values.
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG.
* %QCA_WLAN_VENDOR_GPIO_CONFIG and
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
* attribute is present.
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG: Optional (u32)
* Value to specify the mux config. Meaning of a given value is dependent
* on the target chipset and GPIO pin. Must be of the range 0-15.
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to 0.
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE: Optional (u32)
* Value to specify the drive, refer to enum qca_gpio_drive.
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to QCA_WLAN_GPIO_DRIVE_2MA(0).
*
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG: Optional (flag)
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
* %QCA_WLAN_VENDOR_GPIO_CONFIG. When present this attribute signals that all
* other parameters for the given GPIO will be obtained from internal
* configuration. Only %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM must be
* specified to indicate the GPIO pin being configured.
*/
enum qca_wlan_gpio_attr {
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
@ -2470,6 +2497,12 @@ enum qca_wlan_gpio_attr {
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5,
/* Unsigned 32-bit attribute for GPIO direction to configure */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6,
/* Unsigned 32-bit attribute for GPIO mux config */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG = 7,
/* Unsigned 32-bit attribute for GPIO drive */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE = 8,
/* Flag attribute for using internal GPIO configuration */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG = 9,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
@ -2544,6 +2577,30 @@ enum qca_gpio_interrupt_mode {
QCA_WLAN_GPIO_INTMODE_MAX,
};
/**
* enum qca_gpio_drive - GPIO drive
* @QCA_WLAN_GPIO_DRIVE_2MA: drive 2MA
* @QCA_WLAN_GPIO_DRIVE_4MA: drive 4MA
* @QCA_WLAN_GPIO_DRIVE_6MA: drive 6MA
* @QCA_WLAN_GPIO_DRIVE_8MA: drive 8MA
* @QCA_WLAN_GPIO_DRIVE_10MA: drive 10MA
* @QCA_WLAN_GPIO_DRIVE_12MA: drive 12MA
* @QCA_WLAN_GPIO_DRIVE_14MA: drive 14MA
* @QCA_WLAN_GPIO_DRIVE_16MA: drive 16MA
* @QCA_WLAN_GPIO_DRIVE_MAX: invalid GPIO drive
*/
enum qca_gpio_drive {
QCA_WLAN_GPIO_DRIVE_2MA = 0,
QCA_WLAN_GPIO_DRIVE_4MA = 1,
QCA_WLAN_GPIO_DRIVE_6MA = 2,
QCA_WLAN_GPIO_DRIVE_8MA = 3,
QCA_WLAN_GPIO_DRIVE_10MA = 4,
QCA_WLAN_GPIO_DRIVE_12MA = 5,
QCA_WLAN_GPIO_DRIVE_14MA = 6,
QCA_WLAN_GPIO_DRIVE_16MA = 7,
QCA_WLAN_GPIO_DRIVE_MAX,
};
/**
* qca_wlan_set_qdepth_thresh_attr - Parameters for setting
* MSDUQ depth threshold per peer per tid in the target