Initial step in adding simple AP mode support into wpa_supplicant

This version is adding the configuration option (mode=2) for this and
driver capability reporting to figure out whether AP mode can be used.
However, this does not actually implement any real functionality yet.
This commit is contained in:
Jouni Malinen 2009-03-25 11:38:47 +02:00 committed by Jouni Malinen
parent 17449e213f
commit 1581b38b67
7 changed files with 130 additions and 6 deletions

View file

@ -396,6 +396,8 @@ struct wpa_driver_capa {
/* Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
/* Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
unsigned int flags;
int max_scan_ssids;

View file

@ -1274,6 +1274,7 @@ nla_put_failure:
struct wiphy_info_data {
int max_scan_ssids;
int ap_supported;
};
@ -1290,6 +1291,18 @@ static int wiphy_info_handler(struct nl_msg *msg, void *arg)
info->max_scan_ssids =
nla_get_u8(tb[NL80211_ATTR_MAX_NUM_SCAN_SSIDS]);
if (tb[NL80211_ATTR_SUPPORTED_IFTYPES]) {
struct nlattr *nl_mode;
int i;
nla_for_each_nested(nl_mode,
tb[NL80211_ATTR_SUPPORTED_IFTYPES], i) {
if (nl_mode->nla_type == NL80211_IFTYPE_AP) {
info->ap_supported = 1;
break;
}
}
}
return NL_SKIP;
}
@ -1325,6 +1338,8 @@ static void wpa_driver_nl80211_capa(struct wpa_driver_nl80211_data *drv)
return;
drv->has_capability = 1;
drv->capa.max_scan_ssids = info.max_scan_ssids;
if (info.ap_supported)
drv->capa.flags |= WPA_DRIVER_FLAGS_AP;
}
@ -1536,6 +1551,7 @@ static void wpa_driver_nl80211_deinit(void *priv)
if (wpa_driver_nl80211_get_ifflags(drv, &flags) == 0)
(void) wpa_driver_nl80211_set_ifflags(drv, flags & ~IFF_UP);
wpa_driver_nl80211_set_mode(drv, 0);
close(drv->wext_event_sock);
close(drv->ioctl_sock);
@ -2311,6 +2327,48 @@ nla_put_failure:
}
#ifdef CONFIG_AP
static int wpa_driver_nl80211_set_freq2(
struct wpa_driver_nl80211_data *drv,
struct wpa_driver_associate_params *params)
{
struct nl_msg *msg;
msg = nlmsg_alloc();
if (!msg)
return -1;
genlmsg_put(msg, 0, 0, genl_family_get_id(drv->nl80211), 0, 0,
NL80211_CMD_SET_WIPHY, 0);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
/* TODO: proper channel configuration */
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, 2437);
if (send_and_recv_msgs(drv, msg, NULL, NULL) == 0)
return 0;
nla_put_failure:
return -1;
}
static int wpa_driver_nl80211_ap(struct wpa_driver_nl80211_data *drv,
struct wpa_driver_associate_params *params)
{
if (wpa_driver_nl80211_set_mode(drv, params->mode) ||
wpa_driver_nl80211_set_freq2(drv, params))
return -1;
/* TODO: setup monitor interface (and add code somewhere to remove this
* when AP mode is stopped; associate with mode != 2 or drv_deinit) */
/* TODO: setup beacon */
return 0;
}
#endif /* CONFIG_AP */
static int wpa_driver_nl80211_associate(
void *priv, struct wpa_driver_associate_params *params)
{
@ -2318,6 +2376,11 @@ static int wpa_driver_nl80211_associate(
int ret = -1;
struct nl_msg *msg;
#ifdef CONFIG_AP
if (params->mode == 2)
return wpa_driver_nl80211_ap(drv, params);
#endif /* CONFIG_AP */
wpa_driver_nl80211_set_auth_param(drv, IW_AUTH_DROP_UNENCRYPTED,
params->drop_unencrypted);
@ -2390,6 +2453,21 @@ static int wpa_driver_nl80211_set_mode(struct wpa_driver_nl80211_data *drv,
{
int ret = -1, flags;
struct nl_msg *msg;
int nlmode;
switch (mode) {
case 0:
nlmode = NL80211_IFTYPE_STATION;
break;
case 1:
nlmode = NL80211_IFTYPE_ADHOC;
break;
case 2:
nlmode = NL80211_IFTYPE_AP;
break;
default:
return -1;
}
msg = nlmsg_alloc();
if (!msg)
@ -2398,8 +2476,7 @@ static int wpa_driver_nl80211_set_mode(struct wpa_driver_nl80211_data *drv,
genlmsg_put(msg, 0, 0, genl_family_get_id(drv->nl80211), 0,
0, NL80211_CMD_SET_INTERFACE, 0);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE,
mode ? NL80211_IFTYPE_ADHOC : NL80211_IFTYPE_STATION);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, nlmode);
ret = send_and_recv_msgs(drv, msg, NULL, NULL);
if (!ret)
@ -2428,9 +2505,7 @@ try_again:
genlmsg_put(msg, 0, 0, genl_family_get_id(drv->nl80211), 0,
0, NL80211_CMD_SET_INTERFACE, 0);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE,
mode ? NL80211_IFTYPE_ADHOC :
NL80211_IFTYPE_STATION);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, nlmode);
ret = send_and_recv_msgs(drv, msg, NULL, NULL);
if (ret) {
wpa_printf(MSG_ERROR, "Failed to set interface %s "

View file

@ -620,6 +620,10 @@ LIBS += -ldl -rdynamic
endif
endif
ifdef CONFIG_AP
CFLAGS += -DCONFIG_AP
endif
ifdef CONFIG_EAP_SERVER
CFLAGS += -DEAP_SERVER
OBJS_h += ../src/eap_server/eap.o

View file

@ -1366,7 +1366,7 @@ static const struct parse_data ssid_fields[] = {
{ STRe(pac_file) },
{ INTe(fragment_size) },
#endif /* IEEE8021X_EAPOL */
{ INT_RANGE(mode, 0, 1) },
{ INT_RANGE(mode, 0, 2) },
{ INT_RANGE(proactive_key_caching, 0, 1) },
{ INT_RANGE(disabled, 0, 1) },
{ STR(id_str) },

View file

@ -271,6 +271,8 @@ struct wpa_ssid {
*
* 1 = IBSS (ad-hoc, peer-to-peer)
*
* 2 = AP (access point)
*
* Note: IBSS can only be used with key_mgmt NONE (plaintext and
* static WEP) and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In
* addition, ap_scan has to be set to 2 for IBSS. WPA-None requires

View file

@ -919,6 +919,31 @@ int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
}
#ifdef CONFIG_AP
static void wpa_supplicant_create_ap(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
struct wpa_driver_associate_params params;
if (ssid->ssid == NULL || ssid->ssid_len == 0) {
wpa_printf(MSG_ERROR, "No SSID configured for AP mode");
return;
}
wpa_printf(MSG_DEBUG, "Setting up AP (SSID='%s')",
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
os_memset(&params, 0, sizeof(params));
params.ssid = ssid->ssid;
params.ssid_len = ssid->ssid_len;
params.mode = ssid->mode;
if (wpa_drv_associate(wpa_s, &params) < 0)
wpa_msg(wpa_s, MSG_INFO, "Failed to start AP functionality");
}
#endif /* CONFIG_AP */
/**
* wpa_supplicant_associate - Request association
* @wpa_s: Pointer to wpa_supplicant data
@ -940,6 +965,21 @@ void wpa_supplicant_associate(struct wpa_supplicant *wpa_s,
struct wpa_driver_capa capa;
int assoc_failed = 0;
if (ssid->mode == 2) {
#ifdef CONFIG_AP
if (!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_AP)) {
wpa_printf(MSG_INFO, "Driver does not support AP "
"mode");
return;
}
wpa_supplicant_create_ap(wpa_s, ssid);
#else /* CONFIG_AP */
wpa_printf(MSG_ERROR, "AP mode support not included in the "
"build");
#endif /* CONFIG_AP */
return;
}
if (wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) {
sme_authenticate(wpa_s, bss, ssid);
return;

View file

@ -242,6 +242,7 @@ fast_reauth=1
# mode: IEEE 802.11 operation mode
# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
# 1 = IBSS (ad-hoc, peer-to-peer)
# 2 = AP (access point)
# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
# to be set to 2 for IBSS. WPA-None requires following network block options: