jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

tests: sigma_dut controlled AP with FT and RSNXE Used mismatch

Browse source 
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This commit is contained in:
Jouni Malinen 2020-04-16 23:58:36 +03:00 committed by Jouni Malinen
parent b654552247
commit 11bd6ea60e
1 changed files with 34 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

34
tests/hwsim/test_sigma_dut.py
View file

@ -4302,3 +4302,37 @@ def test_sigma_dut_ft_rsnxe_used_mismatch(dev, apdev):
sigma_dut_cmd_check("sta_reset_default,interface," + ifname)
finally:
stop_sigma_dut(sigma)
def test_sigma_dut_ap_ft_rsnxe_used_mismatch(dev, apdev, params):
"""sigma_dut controlled AP with FT and RSNXE Used mismatch"""
logdir = params['prefix'] + ".sigma-hostapd"
conffile = params['prefix'] + ".sigma-conf"
if "SAE" not in dev[0].get_capability("auth_alg"):
raise HwsimSkip("SAE not supported")
with HWSimRadio() as (radio, iface):
sigma = start_sigma_dut(iface, hostapd_logdir=logdir)
try:
sigma_dut_cmd_check("ap_reset_default")
sigma_dut_cmd_check("ap_set_wireless,NAME,AP,CHANNEL,1,SSID,test-sae,MODE,11ng,DOMAIN,aabb")
sigma_dut_cmd_check("ap_set_security,NAME,AP,AKMSuiteType,8;9,SAEPasswords,hello,PMF,Required")
sigma_dut_cmd_check("ap_config_commit,NAME,AP")
with open("/tmp/sigma_dut-ap.conf", "rb") as f:
with open(conffile, "wb") as f2:
f2.write(f.read())
dev[0].connect("test-sae", key_mgmt="FT-SAE", sae_password="hello",
ieee80211w="2", scan_freq="2412")
sigma_dut_cmd_check("ap_set_rfeature,NAME,AP,type,WPA3,ReassocResp_RSNXE_Used,1")
# This would need to be followed by FT protocol roaming test, but
# that is not currently convenient to implement, so for now, this
# test is based on manual inspection of hostapd getting configured
# properly.
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
sigma_dut_cmd_check("ap_reset_default")
finally:
stop_sigma_dut(sigma)