jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Add QCA vendor attributes for agile spectral scan

Browse source 
Add QCA vendor attributes to spectral scan related vendor commands to
support agile spectral scan.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This commit is contained in:
Edayilliam Jayadev 2019-04-08 15:45:46 +05:30 committed by Jouni Malinen
parent f50187a64c
commit 0fa0858fe7
1 changed files with 77 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

78
src/common/qca-vendor.h
View file

@ -376,7 +376,9 @@ enum qca_radiotap_vendor_ids {
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan
* parameters are specified by enum qca_wlan_vendor_attr_spectral_scan.
* This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE)
* identifying the operation in success case.
* identifying the operation in success case. In failure cases an
* error code (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE)
* describing the reason for the failure is returned.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses
* a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from
@ -4555,6 +4557,34 @@ enum qca_wlan_vendor_attr_spectral_scan {
* qca_wlan_vendor_attr_spectral_scan_request_type.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23,
/* This specifies the frequency span over which spectral
* scan would be carried out. Its value depends on the
* value of QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and
* the relation is as follows.
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL
* Not applicable. Spectral scan would happen in the
* operating span.
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE
* Center frequency (in MHz) of the span of interest or
* for convenience, center frequency (in MHz) of any channel
* in the span of interest. If agile spectral scan is initiated
* without setting a valid frequency it returns the error code
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED).
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY = 24,
/* Spectral scan mode. u32 attribute.
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
* If this attribute is not present, it is assumed to be
* normal mode (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL).
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE = 25,
/* Spectral scan error code. u32 attribute.
* It uses values defined in enum
* qca_wlan_vendor_spectral_scan_error_code.
* This attribute is included only in failure scenarios.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE = 26,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
@ -4633,6 +4663,8 @@ enum qca_wlan_vendor_attr_spectral_cap {
* u8 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10,
/* Flag attribute to indicate agile spectral scan capability */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL = 11,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX =
@ -4649,6 +4681,13 @@ enum qca_wlan_vendor_attr_spectral_scan_status {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1,
/* Flag attribute to indicate whether spectral scan is in progress*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2,
/* Spectral scan mode. u32 attribute.
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
* If this attribute is not present, normal mode
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL is assumed to be
* requested.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE = 3,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX =
@ -4673,6 +4712,43 @@ enum qca_wlan_vendor_attr_spectral_scan_request_type {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG,
};
/**
* qca_wlan_vendor_spectral_scan_mode: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START and
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. This represents the
* spectral scan modes.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL: Normal spectral scan:
* spectral scan in the current operating span.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE: Agile spectral scan:
* spectral scan in the configured agile span.
*/
enum qca_wlan_vendor_spectral_scan_mode {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE = 1,
};
/**
* qca_wlan_vendor_spectral_scan_error_code: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED: Changing the value
* of a parameter is not supported.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED: Requested spectral scan
* mode is not supported.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE: A parameter
* has invalid value.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED: A parameter
* is not initialized.
*/
enum qca_wlan_vendor_spectral_scan_error_code {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED = 1,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE = 2,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED = 3,
};
/**
* qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd