You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
hostap/src/ap/ap_config.c

1022 lines
25 KiB
C

/*
* hostapd / Configuration helper functions
* Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "crypto/sha1.h"
#include "radius/radius_client.h"
#include "common/ieee802_11_defs.h"
#include "common/eapol_common.h"
#include "eap_common/eap_wsc_common.h"
#include "eap_server/eap.h"
#include "wpa_auth.h"
#include "sta_info.h"
#include "ap_config.h"
static void hostapd_config_free_vlan(struct hostapd_bss_config *bss)
{
struct hostapd_vlan *vlan, *prev;
vlan = bss->vlan;
prev = NULL;
while (vlan) {
prev = vlan;
vlan = vlan->next;
os_free(prev);
}
bss->vlan = NULL;
}
void hostapd_config_defaults_bss(struct hostapd_bss_config *bss)
{
dl_list_init(&bss->anqp_elem);
bss->logger_syslog_level = HOSTAPD_LEVEL_INFO;
bss->logger_stdout_level = HOSTAPD_LEVEL_INFO;
bss->logger_syslog = (unsigned int) -1;
bss->logger_stdout = (unsigned int) -1;
bss->auth_algs = WPA_AUTH_ALG_OPEN | WPA_AUTH_ALG_SHARED;
bss->wep_rekeying_period = 300;
/* use key0 in individual key and key1 in broadcast key */
bss->broadcast_key_idx_min = 1;
bss->broadcast_key_idx_max = 2;
bss->eap_reauth_period = 3600;
bss->wpa_group_rekey = 600;
bss->wpa_gmk_rekey = 86400;
bss->wpa_key_mgmt = WPA_KEY_MGMT_PSK;
bss->wpa_pairwise = WPA_CIPHER_TKIP;
bss->wpa_group = WPA_CIPHER_TKIP;
bss->rsn_pairwise = 0;
bss->max_num_sta = MAX_STA_COUNT;
bss->dtim_period = 2;
bss->radius_server_auth_port = 1812;
bss->eap_sim_db_timeout = 1;
bss->ap_max_inactivity = AP_MAX_INACTIVITY;
bss->eapol_version = EAPOL_VERSION;
bss->max_listen_interval = 65535;
bss->pwd_group = 19; /* ECC: GF(p=256) */
#ifdef CONFIG_IEEE80211W
bss->assoc_sa_query_max_timeout = 1000;
bss->assoc_sa_query_retry_timeout = 201;
bss->group_mgmt_cipher = WPA_CIPHER_AES_128_CMAC;
#endif /* CONFIG_IEEE80211W */
#ifdef EAP_SERVER_FAST
/* both anonymous and authenticated provisioning */
bss->eap_fast_prov = 3;
bss->pac_key_lifetime = 7 * 24 * 60 * 60;
bss->pac_key_refresh_time = 1 * 24 * 60 * 60;
#endif /* EAP_SERVER_FAST */
/* Set to -1 as defaults depends on HT in setup */
bss->wmm_enabled = -1;
#ifdef CONFIG_IEEE80211R
bss->ft_over_ds = 1;
#endif /* CONFIG_IEEE80211R */
bss->radius_das_time_window = 300;
bss->sae_anti_clogging_threshold = 5;
}
struct hostapd_config * hostapd_config_defaults(void)
{
#define ecw2cw(ecw) ((1 << (ecw)) - 1)
struct hostapd_config *conf;
struct hostapd_bss_config *bss;
const int aCWmin = 4, aCWmax = 10;
const struct hostapd_wmm_ac_params ac_bk =
{ aCWmin, aCWmax, 7, 0, 0 }; /* background traffic */
const struct hostapd_wmm_ac_params ac_be =
{ aCWmin, aCWmax, 3, 0, 0 }; /* best effort traffic */
const struct hostapd_wmm_ac_params ac_vi = /* video traffic */
{ aCWmin - 1, aCWmin, 2, 3008 / 32, 0 };
const struct hostapd_wmm_ac_params ac_vo = /* voice traffic */
{ aCWmin - 2, aCWmin - 1, 2, 1504 / 32, 0 };
const struct hostapd_tx_queue_params txq_bk =
{ 7, ecw2cw(aCWmin), ecw2cw(aCWmax), 0 };
const struct hostapd_tx_queue_params txq_be =
{ 3, ecw2cw(aCWmin), 4 * (ecw2cw(aCWmin) + 1) - 1, 0};
const struct hostapd_tx_queue_params txq_vi =
{ 1, (ecw2cw(aCWmin) + 1) / 2 - 1, ecw2cw(aCWmin), 30};
const struct hostapd_tx_queue_params txq_vo =
{ 1, (ecw2cw(aCWmin) + 1) / 4 - 1,
(ecw2cw(aCWmin) + 1) / 2 - 1, 15};
#undef ecw2cw
conf = os_zalloc(sizeof(*conf));
bss = os_zalloc(sizeof(*bss));
if (conf == NULL || bss == NULL) {
wpa_printf(MSG_ERROR, "Failed to allocate memory for "
"configuration data.");
os_free(conf);
os_free(bss);
return NULL;
}
conf->bss = os_calloc(1, sizeof(struct hostapd_bss_config *));
if (conf->bss == NULL) {
os_free(conf);
os_free(bss);
return NULL;
}
conf->bss[0] = bss;
bss->radius = os_zalloc(sizeof(*bss->radius));
if (bss->radius == NULL) {
os_free(conf->bss);
os_free(conf);
os_free(bss);
return NULL;
}
hostapd_config_defaults_bss(bss);
conf->num_bss = 1;
conf->beacon_int = 100;
conf->rts_threshold = -1; /* use driver default: 2347 */
conf->fragm_threshold = -1; /* user driver default: 2346 */
conf->send_probe_response = 1;
/* Set to invalid value means do not add Power Constraint IE */
conf->local_pwr_constraint = -1;
conf->wmm_ac_params[0] = ac_be;
conf->wmm_ac_params[1] = ac_bk;
conf->wmm_ac_params[2] = ac_vi;
conf->wmm_ac_params[3] = ac_vo;
conf->tx_queue[0] = txq_vo;
conf->tx_queue[1] = txq_vi;
conf->tx_queue[2] = txq_be;
conf->tx_queue[3] = txq_bk;
conf->ht_capab = HT_CAP_INFO_SMPS_DISABLED;
conf->ap_table_max_size = 255;
conf->ap_table_expiration_time = 60;
conf->track_sta_max_age = 180;
#ifdef CONFIG_TESTING_OPTIONS
conf->ignore_probe_probability = 0.0;
conf->ignore_auth_probability = 0.0;
conf->ignore_assoc_probability = 0.0;
conf->ignore_reassoc_probability = 0.0;
conf->corrupt_gtk_rekey_mic_probability = 0.0;
conf->ecsa_ie_only = 0;
#endif /* CONFIG_TESTING_OPTIONS */
conf->acs = 0;
conf->acs_ch_list.num = 0;
#ifdef CONFIG_ACS
conf->acs_num_scans = 5;
#endif /* CONFIG_ACS */
return conf;
}
int hostapd_mac_comp(const void *a, const void *b)
{
return os_memcmp(a, b, sizeof(macaddr));
}
static int hostapd_config_read_wpa_psk(const char *fname,
struct hostapd_ssid *ssid)
{
FILE *f;
char buf[128], *pos;
int line = 0, ret = 0, len, ok;
u8 addr[ETH_ALEN];
struct hostapd_wpa_psk *psk;
if (!fname)
return 0;
f = fopen(fname, "r");
if (!f) {
wpa_printf(MSG_ERROR, "WPA PSK file '%s' not found.", fname);
return -1;
}
while (fgets(buf, sizeof(buf), f)) {
line++;
if (buf[0] == '#')
continue;
pos = buf;
while (*pos != '\0') {
if (*pos == '\n') {
*pos = '\0';
break;
}
pos++;
}
if (buf[0] == '\0')
continue;
if (hwaddr_aton(buf, addr)) {
wpa_printf(MSG_ERROR, "Invalid MAC address '%s' on "
"line %d in '%s'", buf, line, fname);
ret = -1;
break;
}
psk = os_zalloc(sizeof(*psk));
if (psk == NULL) {
wpa_printf(MSG_ERROR, "WPA PSK allocation failed");
ret = -1;
break;
}
if (is_zero_ether_addr(addr))
psk->group = 1;
else
os_memcpy(psk->addr, addr, ETH_ALEN);
pos = buf + 17;
if (*pos == '\0') {
wpa_printf(MSG_ERROR, "No PSK on line %d in '%s'",
line, fname);
os_free(psk);
ret = -1;
break;
}
pos++;
ok = 0;
len = os_strlen(pos);
if (len == 64 && hexstr2bin(pos, psk->psk, PMK_LEN) == 0)
ok = 1;
else if (len >= 8 && len < 64) {
pbkdf2_sha1(pos, ssid->ssid, ssid->ssid_len,
4096, psk->psk, PMK_LEN);
ok = 1;
}
if (!ok) {
wpa_printf(MSG_ERROR, "Invalid PSK '%s' on line %d in "
"'%s'", pos, line, fname);
os_free(psk);
ret = -1;
break;
}
psk->next = ssid->wpa_psk;
ssid->wpa_psk = psk;
}
fclose(f);
return ret;
}
static int hostapd_derive_psk(struct hostapd_ssid *ssid)
{
ssid->wpa_psk = os_zalloc(sizeof(struct hostapd_wpa_psk));
if (ssid->wpa_psk == NULL) {
wpa_printf(MSG_ERROR, "Unable to alloc space for PSK");
return -1;
}
wpa_hexdump_ascii(MSG_DEBUG, "SSID",
(u8 *) ssid->ssid, ssid->ssid_len);
wpa_hexdump_ascii_key(MSG_DEBUG, "PSK (ASCII passphrase)",
(u8 *) ssid->wpa_passphrase,
os_strlen(ssid->wpa_passphrase));
pbkdf2_sha1(ssid->wpa_passphrase,
ssid->ssid, ssid->ssid_len,
4096, ssid->wpa_psk->psk, PMK_LEN);
wpa_hexdump_key(MSG_DEBUG, "PSK (from passphrase)",
ssid->wpa_psk->psk, PMK_LEN);
return 0;
}
int hostapd_setup_wpa_psk(struct hostapd_bss_config *conf)
{
struct hostapd_ssid *ssid = &conf->ssid;
if (ssid->wpa_passphrase != NULL) {
if (ssid->wpa_psk != NULL) {
wpa_printf(MSG_DEBUG, "Using pre-configured WPA PSK "
"instead of passphrase");
} else {
wpa_printf(MSG_DEBUG, "Deriving WPA PSK based on "
"passphrase");
if (hostapd_derive_psk(ssid) < 0)
return -1;
}
ssid->wpa_psk->group = 1;
}
if (ssid->wpa_psk_file) {
if (hostapd_config_read_wpa_psk(ssid->wpa_psk_file,
&conf->ssid))
return -1;
}
return 0;
}
static void hostapd_config_free_radius(struct hostapd_radius_server *servers,
int num_servers)
{
int i;
for (i = 0; i < num_servers; i++) {
os_free(servers[i].shared_secret);
}
os_free(servers);
}
struct hostapd_radius_attr *
hostapd_config_get_radius_attr(struct hostapd_radius_attr *attr, u8 type)
{
for (; attr; attr = attr->next) {
if (attr->type == type)
return attr;
}
return NULL;
}
static void hostapd_config_free_radius_attr(struct hostapd_radius_attr *attr)
{
struct hostapd_radius_attr *prev;
while (attr) {
prev = attr;
attr = attr->next;
wpabuf_free(prev->val);
os_free(prev);
}
}
void hostapd_config_free_eap_user(struct hostapd_eap_user *user)
{
hostapd_config_free_radius_attr(user->accept_attr);
os_free(user->identity);
bin_clear_free(user->password, user->password_len);
os_free(user);
}
static void hostapd_config_free_wep(struct hostapd_wep_keys *keys)
{
int i;
for (i = 0; i < NUM_WEP_KEYS; i++) {
bin_clear_free(keys->key[i], keys->len[i]);
keys->key[i] = NULL;
}
}
void hostapd_config_clear_wpa_psk(struct hostapd_wpa_psk **l)
{
struct hostapd_wpa_psk *psk, *tmp;
for (psk = *l; psk;) {
tmp = psk;
psk = psk->next;
bin_clear_free(tmp, sizeof(*tmp));
}
*l = NULL;
}
static void hostapd_config_free_anqp_elem(struct hostapd_bss_config *conf)
{
struct anqp_element *elem;
while ((elem = dl_list_first(&conf->anqp_elem, struct anqp_element,
list))) {
dl_list_del(&elem->list);
wpabuf_free(elem->payload);
os_free(elem);
}
}
void hostapd_config_free_bss(struct hostapd_bss_config *conf)
{
struct hostapd_eap_user *user, *prev_user;
if (conf == NULL)
return;
hostapd_config_clear_wpa_psk(&conf->ssid.wpa_psk);
str_clear_free(conf->ssid.wpa_passphrase);
os_free(conf->ssid.wpa_psk_file);
hostapd_config_free_wep(&conf->ssid.wep);
#ifdef CONFIG_FULL_DYNAMIC_VLAN
os_free(conf->ssid.vlan_tagged_interface);
#endif /* CONFIG_FULL_DYNAMIC_VLAN */
user = conf->eap_user;
while (user) {
prev_user = user;
user = user->next;
hostapd_config_free_eap_user(prev_user);
}
os_free(conf->eap_user_sqlite);
os_free(conf->eap_req_id_text);
os_free(conf->erp_domain);
os_free(conf->accept_mac);
os_free(conf->deny_mac);
os_free(conf->nas_identifier);
if (conf->radius) {
hostapd_config_free_radius(conf->radius->auth_servers,
conf->radius->num_auth_servers);
hostapd_config_free_radius(conf->radius->acct_servers,
conf->radius->num_acct_servers);
}
hostapd_config_free_radius_attr(conf->radius_auth_req_attr);
hostapd_config_free_radius_attr(conf->radius_acct_req_attr);
os_free(conf->rsn_preauth_interfaces);
os_free(conf->ctrl_interface);
os_free(conf->ca_cert);
os_free(conf->server_cert);
os_free(conf->private_key);
os_free(conf->private_key_passwd);
os_free(conf->ocsp_stapling_response);
os_free(conf->ocsp_stapling_response_multi);
os_free(conf->dh_file);
os_free(conf->openssl_ciphers);
os_free(conf->pac_opaque_encr_key);
os_free(conf->eap_fast_a_id);
os_free(conf->eap_fast_a_id_info);
os_free(conf->eap_sim_db);
os_free(conf->radius_server_clients);
os_free(conf->radius);
os_free(conf->radius_das_shared_secret);
hostapd_config_free_vlan(conf);
os_free(conf->time_zone);
#ifdef CONFIG_IEEE80211R
{
struct ft_remote_r0kh *r0kh, *r0kh_prev;
struct ft_remote_r1kh *r1kh, *r1kh_prev;
r0kh = conf->r0kh_list;
conf->r0kh_list = NULL;
while (r0kh) {
r0kh_prev = r0kh;
r0kh = r0kh->next;
os_free(r0kh_prev);
}
r1kh = conf->r1kh_list;
conf->r1kh_list = NULL;
while (r1kh) {
r1kh_prev = r1kh;
r1kh = r1kh->next;
os_free(r1kh_prev);
}
}
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_WPS
os_free(conf->wps_pin_requests);
os_free(conf->device_name);
os_free(conf->manufacturer);
os_free(conf->model_name);
os_free(conf->model_number);
os_free(conf->serial_number);
os_free(conf->config_methods);
os_free(conf->ap_pin);
os_free(conf->extra_cred);
os_free(conf->ap_settings);
os_free(conf->upnp_iface);
os_free(conf->friendly_name);
os_free(conf->manufacturer_url);
os_free(conf->model_description);
os_free(conf->model_url);
os_free(conf->upc);
{
unsigned int i;
for (i = 0; i < MAX_WPS_VENDOR_EXTENSIONS; i++)
wpabuf_free(conf->wps_vendor_ext[i]);
}
wpabuf_free(conf->wps_nfc_dh_pubkey);
wpabuf_free(conf->wps_nfc_dh_privkey);
wpabuf_free(conf->wps_nfc_dev_pw);
#endif /* CONFIG_WPS */
os_free(conf->roaming_consortium);
os_free(conf->venue_name);
os_free(conf->nai_realm_data);
os_free(conf->network_auth_type);
os_free(conf->anqp_3gpp_cell_net);
os_free(conf->domain_name);
hostapd_config_free_anqp_elem(conf);
#ifdef CONFIG_RADIUS_TEST
os_free(conf->dump_msk_file);
#endif /* CONFIG_RADIUS_TEST */
#ifdef CONFIG_HS20
os_free(conf->hs20_oper_friendly_name);
os_free(conf->hs20_wan_metrics);
os_free(conf->hs20_connection_capability);
os_free(conf->hs20_operating_class);
os_free(conf->hs20_icons);
if (conf->hs20_osu_providers) {
size_t i;
for (i = 0; i < conf->hs20_osu_providers_count; i++) {
struct hs20_osu_provider *p;
size_t j;
p = &conf->hs20_osu_providers[i];
os_free(p->friendly_name);
os_free(p->server_uri);
os_free(p->method_list);
for (j = 0; j < p->icons_count; j++)
os_free(p->icons[j]);
os_free(p->icons);
os_free(p->osu_nai);
os_free(p->service_desc);
}
os_free(conf->hs20_osu_providers);
}
os_free(conf->subscr_remediation_url);
#endif /* CONFIG_HS20 */
wpabuf_free(conf->vendor_elements);
os_free(conf->sae_groups);
os_free(conf->wowlan_triggers);
os_free(conf->server_id);
#ifdef CONFIG_TESTING_OPTIONS
wpabuf_free(conf->own_ie_override);
#endif /* CONFIG_TESTING_OPTIONS */
os_free(conf->no_probe_resp_if_seen_on);
os_free(conf->no_auth_if_seen_on);
os_free(conf);
}
/**
* hostapd_config_free - Free hostapd configuration
* @conf: Configuration data from hostapd_config_read().
*/
void hostapd_config_free(struct hostapd_config *conf)
{
size_t i;
if (conf == NULL)
return;
for (i = 0; i < conf->num_bss; i++)
hostapd_config_free_bss(conf->bss[i]);
os_free(conf->bss);
os_free(conf->supported_rates);
os_free(conf->basic_rates);
os_free(conf->acs_ch_list.range);
os_free(conf->driver_params);
#ifdef CONFIG_ACS
os_free(conf->acs_chan_bias);
#endif /* CONFIG_ACS */
os_free(conf);
}
/**
* hostapd_maclist_found - Find a MAC address from a list
* @list: MAC address list
* @num_entries: Number of addresses in the list
* @addr: Address to search for
* @vlan_id: Buffer for returning VLAN ID or %NULL if not needed
* Returns: 1 if address is in the list or 0 if not.
*
* Perform a binary search for given MAC address from a pre-sorted list.
*/
int hostapd_maclist_found(struct mac_acl_entry *list, int num_entries,
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
const u8 *addr, struct vlan_description *vlan_id)
{
int start, end, middle, res;
start = 0;
end = num_entries - 1;
while (start <= end) {
middle = (start + end) / 2;
res = os_memcmp(list[middle].addr, addr, ETH_ALEN);
if (res == 0) {
if (vlan_id)
*vlan_id = list[middle].vlan_id;
return 1;
}
if (res < 0)
start = middle + 1;
else
end = middle - 1;
}
return 0;
}
int hostapd_rate_found(int *list, int rate)
{
int i;
if (list == NULL)
return 0;
for (i = 0; list[i] >= 0; i++)
if (list[i] == rate)
return 1;
return 0;
}
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
int hostapd_vlan_valid(struct hostapd_vlan *vlan,
struct vlan_description *vlan_desc)
{
struct hostapd_vlan *v = vlan;
int i;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
if (!vlan_desc->notempty || vlan_desc->untagged < 0 ||
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
vlan_desc->untagged > MAX_VLAN_ID)
return 0;
for (i = 0; i < MAX_NUM_TAGGED_VLAN; i++) {
if (vlan_desc->tagged[i] < 0 ||
vlan_desc->tagged[i] > MAX_VLAN_ID)
return 0;
}
if (!vlan_desc->untagged && !vlan_desc->tagged[0])
return 0;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
while (v) {
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
8 years ago
if (!vlan_compare(&v->vlan_desc, vlan_desc) ||
v->vlan_id == VLAN_ID_WILDCARD)
return 1;
v = v->next;
}
return 0;
}
const char * hostapd_get_vlan_id_ifname(struct hostapd_vlan *vlan, int vlan_id)
{
struct hostapd_vlan *v = vlan;
while (v) {
if (v->vlan_id == vlan_id)
return v->ifname;
v = v->next;
}
return NULL;
}
const u8 * hostapd_get_psk(const struct hostapd_bss_config *conf,
const u8 *addr, const u8 *p2p_dev_addr,
const u8 *prev_psk)
{
struct hostapd_wpa_psk *psk;
int next_ok = prev_psk == NULL;
if (p2p_dev_addr && !is_zero_ether_addr(p2p_dev_addr)) {
wpa_printf(MSG_DEBUG, "Searching a PSK for " MACSTR
" p2p_dev_addr=" MACSTR " prev_psk=%p",
MAC2STR(addr), MAC2STR(p2p_dev_addr), prev_psk);
addr = NULL; /* Use P2P Device Address for matching */
} else {
wpa_printf(MSG_DEBUG, "Searching a PSK for " MACSTR
" prev_psk=%p",
MAC2STR(addr), prev_psk);
}
for (psk = conf->ssid.wpa_psk; psk != NULL; psk = psk->next) {
if (next_ok &&
(psk->group ||
(addr && os_memcmp(psk->addr, addr, ETH_ALEN) == 0) ||
(!addr && p2p_dev_addr &&
os_memcmp(psk->p2p_dev_addr, p2p_dev_addr, ETH_ALEN) ==
0)))
return psk->psk;
if (psk->psk == prev_psk)
next_ok = 1;
}
return NULL;
}
static int hostapd_config_check_bss(struct hostapd_bss_config *bss,
struct hostapd_config *conf,
int full_config)
{
if (full_config && bss->ieee802_1x && !bss->eap_server &&
!bss->radius->auth_servers) {
wpa_printf(MSG_ERROR, "Invalid IEEE 802.1X configuration (no "
"EAP authenticator configured).");
return -1;
}
if (bss->wpa) {
int wep, i;
wep = bss->default_wep_key_len > 0 ||
bss->individual_wep_key_len > 0;
for (i = 0; i < NUM_WEP_KEYS; i++) {
if (bss->ssid.wep.keys_set) {
wep = 1;
break;
}
}
if (wep) {
wpa_printf(MSG_ERROR, "WEP configuration in a WPA network is not supported");
return -1;
}
}
if (full_config && bss->wpa &&
bss->wpa_psk_radius != PSK_RADIUS_IGNORED &&
bss->macaddr_acl != USE_EXTERNAL_RADIUS_AUTH) {
wpa_printf(MSG_ERROR, "WPA-PSK using RADIUS enabled, but no "
"RADIUS checking (macaddr_acl=2) enabled.");
return -1;
}
if (full_config && bss->wpa && (bss->wpa_key_mgmt & WPA_KEY_MGMT_PSK) &&
bss->ssid.wpa_psk == NULL && bss->ssid.wpa_passphrase == NULL &&
bss->ssid.wpa_psk_file == NULL &&
(bss->wpa_psk_radius != PSK_RADIUS_REQUIRED ||
bss->macaddr_acl != USE_EXTERNAL_RADIUS_AUTH)) {
wpa_printf(MSG_ERROR, "WPA-PSK enabled, but PSK or passphrase "
"is not configured.");
return -1;
}
if (full_config && !is_zero_ether_addr(bss->bssid)) {
size_t i;
for (i = 0; i < conf->num_bss; i++) {
if (conf->bss[i] != bss &&
(hostapd_mac_comp(conf->bss[i]->bssid,
bss->bssid) == 0)) {
wpa_printf(MSG_ERROR, "Duplicate BSSID " MACSTR
" on interface '%s' and '%s'.",
MAC2STR(bss->bssid),
conf->bss[i]->iface, bss->iface);
return -1;
}
}
}
#ifdef CONFIG_IEEE80211R
if (full_config && wpa_key_mgmt_ft(bss->wpa_key_mgmt) &&
(bss->nas_identifier == NULL ||
os_strlen(bss->nas_identifier) < 1 ||
os_strlen(bss->nas_identifier) > FT_R0KH_ID_MAX_LEN)) {
wpa_printf(MSG_ERROR, "FT (IEEE 802.11r) requires "
"nas_identifier to be configured as a 1..48 octet "
"string");
return -1;
}
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_IEEE80211N
if (full_config && conf->ieee80211n &&
conf->hw_mode == HOSTAPD_MODE_IEEE80211B) {
bss->disable_11n = 1;
wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) in 11b mode is not "
"allowed, disabling HT capabilities");
}
if (full_config && conf->ieee80211n &&
bss->ssid.security_policy == SECURITY_STATIC_WEP) {
bss->disable_11n = 1;
wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) with WEP is not "
"allowed, disabling HT capabilities");
}
if (full_config && conf->ieee80211n && bss->wpa &&
!(bss->wpa_pairwise & WPA_CIPHER_CCMP) &&
!(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP |
WPA_CIPHER_CCMP_256 | WPA_CIPHER_GCMP_256)))
{
bss->disable_11n = 1;
wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) with WPA/WPA2 "
"requires CCMP/GCMP to be enabled, disabling HT "
"capabilities");
}
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_WPS
if (full_config && bss->wps_state && bss->ignore_broadcast_ssid) {
wpa_printf(MSG_INFO, "WPS: ignore_broadcast_ssid "
"configuration forced WPS to be disabled");
bss->wps_state = 0;
}
if (full_config && bss->wps_state &&
bss->ssid.wep.keys_set && bss->wpa == 0) {
wpa_printf(MSG_INFO, "WPS: WEP configuration forced WPS to be "
"disabled");
bss->wps_state = 0;
}
if (full_config && bss->wps_state && bss->wpa &&
(!(bss->wpa & 2) ||
!(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP)))) {
wpa_printf(MSG_INFO, "WPS: WPA/TKIP configuration without "
"WPA2/CCMP/GCMP forced WPS to be disabled");
bss->wps_state = 0;
}
#endif /* CONFIG_WPS */
#ifdef CONFIG_HS20
if (full_config && bss->hs20 &&
(!(bss->wpa & 2) ||
!(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP |
WPA_CIPHER_CCMP_256 |
WPA_CIPHER_GCMP_256)))) {
wpa_printf(MSG_ERROR, "HS 2.0: WPA2-Enterprise/CCMP "
"configuration is required for Hotspot 2.0 "
"functionality");
return -1;
}
#endif /* CONFIG_HS20 */
#ifdef CONFIG_MBO
if (full_config && bss->mbo_enabled && (bss->wpa & 2) &&
bss->ieee80211w == NO_MGMT_FRAME_PROTECTION) {
wpa_printf(MSG_ERROR,
"MBO: PMF needs to be enabled whenever using WPA2 with MBO");
return -1;
}
#endif /* CONFIG_MBO */
return 0;
}
static int hostapd_config_check_cw(struct hostapd_config *conf, int queue)
{
int tx_cwmin = conf->tx_queue[queue].cwmin;
int tx_cwmax = conf->tx_queue[queue].cwmax;
int ac_cwmin = conf->wmm_ac_params[queue].cwmin;
int ac_cwmax = conf->wmm_ac_params[queue].cwmax;
if (tx_cwmin > tx_cwmax) {
wpa_printf(MSG_ERROR,
"Invalid TX queue cwMin/cwMax values. cwMin(%d) greater than cwMax(%d)",
tx_cwmin, tx_cwmax);
return -1;
}
if (ac_cwmin > ac_cwmax) {
wpa_printf(MSG_ERROR,
"Invalid WMM AC cwMin/cwMax values. cwMin(%d) greater than cwMax(%d)",
ac_cwmin, ac_cwmax);
return -1;
}
return 0;
}
int hostapd_config_check(struct hostapd_config *conf, int full_config)
{
size_t i;
if (full_config && conf->ieee80211d &&
(!conf->country[0] || !conf->country[1])) {
wpa_printf(MSG_ERROR, "Cannot enable IEEE 802.11d without "
"setting the country_code");
return -1;
}
if (full_config && conf->ieee80211h && !conf->ieee80211d) {
wpa_printf(MSG_ERROR, "Cannot enable IEEE 802.11h without "
"IEEE 802.11d enabled");
return -1;
}
if (full_config && conf->local_pwr_constraint != -1 &&
!conf->ieee80211d) {
wpa_printf(MSG_ERROR, "Cannot add Power Constraint element without Country element");
return -1;
}
if (full_config && conf->spectrum_mgmt_required &&
conf->local_pwr_constraint == -1) {
wpa_printf(MSG_ERROR, "Cannot set Spectrum Management bit without Country and Power Constraint elements");
return -1;
}
for (i = 0; i < NUM_TX_QUEUES; i++) {
if (hostapd_config_check_cw(conf, i))
return -1;
}
for (i = 0; i < conf->num_bss; i++) {
if (hostapd_config_check_bss(conf->bss[i], conf, full_config))
return -1;
}
return 0;
}
void hostapd_set_security_params(struct hostapd_bss_config *bss,
int full_config)
{
if (bss->individual_wep_key_len == 0) {
/* individual keys are not use; can use key idx0 for
* broadcast keys */
bss->broadcast_key_idx_min = 0;
}
if ((bss->wpa & 2) && bss->rsn_pairwise == 0)
bss->rsn_pairwise = bss->wpa_pairwise;
bss->wpa_group = wpa_select_ap_group_cipher(bss->wpa, bss->wpa_pairwise,
bss->rsn_pairwise);
if (full_config) {
bss->radius->auth_server = bss->radius->auth_servers;
bss->radius->acct_server = bss->radius->acct_servers;
}
if (bss->wpa && bss->ieee802_1x) {
bss->ssid.security_policy = SECURITY_WPA;
} else if (bss->wpa) {
bss->ssid.security_policy = SECURITY_WPA_PSK;
} else if (bss->ieee802_1x) {
int cipher = WPA_CIPHER_NONE;
bss->ssid.security_policy = SECURITY_IEEE_802_1X;
bss->ssid.wep.default_len = bss->default_wep_key_len;
if (full_config && bss->default_wep_key_len) {
cipher = bss->default_wep_key_len >= 13 ?
WPA_CIPHER_WEP104 : WPA_CIPHER_WEP40;
} else if (full_config && bss->ssid.wep.keys_set) {
if (bss->ssid.wep.len[0] >= 13)
cipher = WPA_CIPHER_WEP104;
else
cipher = WPA_CIPHER_WEP40;
}
bss->wpa_group = cipher;
bss->wpa_pairwise = cipher;
bss->rsn_pairwise = cipher;
if (full_config)
bss->wpa_key_mgmt = WPA_KEY_MGMT_IEEE8021X_NO_WPA;
} else if (bss->ssid.wep.keys_set) {
int cipher = WPA_CIPHER_WEP40;
if (bss->ssid.wep.len[0] >= 13)
cipher = WPA_CIPHER_WEP104;
bss->ssid.security_policy = SECURITY_STATIC_WEP;
bss->wpa_group = cipher;
bss->wpa_pairwise = cipher;
bss->rsn_pairwise = cipher;
if (full_config)
bss->wpa_key_mgmt = WPA_KEY_MGMT_NONE;
} else if (bss->osen) {
bss->ssid.security_policy = SECURITY_OSEN;
bss->wpa_group = WPA_CIPHER_CCMP;
bss->wpa_pairwise = 0;
bss->rsn_pairwise = WPA_CIPHER_CCMP;
} else {
bss->ssid.security_policy = SECURITY_PLAINTEXT;
if (full_config) {
bss->wpa_group = WPA_CIPHER_NONE;
bss->wpa_pairwise = WPA_CIPHER_NONE;
bss->rsn_pairwise = WPA_CIPHER_NONE;
bss->wpa_key_mgmt = WPA_KEY_MGMT_NONE;
}
}
}