hostap/wpa_supplicant/config_ssid.h

428 lines
12 KiB
C
Raw Normal View History

/*
* WPA Supplicant / Network configuration structures
* Copyright (c) 2003-2008, Jouni Malinen <j@w1.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Alternatively, this software may be distributed under the terms of BSD
* license.
*
* See README and COPYING for more details.
*/
#ifndef CONFIG_SSID_H
#define CONFIG_SSID_H
#include "common/defs.h"
#include "eap_peer/eap_config.h"
#define MAX_SSID_LEN 32
#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
EAPOL_FLAG_REQUIRE_KEY_BROADCAST)
#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP | \
WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)
#define DEFAULT_FRAGMENT_SIZE 1398
/**
* struct wpa_ssid - Network configuration data
*
* This structure includes all the configuration variables for a network. This
* data is included in the per-interface configuration data as an element of
* the network list, struct wpa_config::ssid. Each network block in the
* configuration is mapped to a struct wpa_ssid instance.
*/
struct wpa_ssid {
/**
* next - Next network in global list
*
* This pointer can be used to iterate over all networks. The head of
* this list is stored in the ssid field of struct wpa_config.
*/
struct wpa_ssid *next;
/**
* pnext - Next network in per-priority list
*
* This pointer can be used to iterate over all networks in the same
* priority class. The heads of these list are stored in the pssid
* fields of struct wpa_config.
*/
struct wpa_ssid *pnext;
/**
* id - Unique id for the network
*
* This identifier is used as a unique identifier for each network
* block when using the control interface. Each network is allocated an
* id when it is being created, either when reading the configuration
* file or when a new network is added through the control interface.
*/
int id;
/**
* priority - Priority group
*
* By default, all networks will get same priority group (0). If some
* of the networks are more desirable, this field can be used to change
* the order in which wpa_supplicant goes through the networks when
* selecting a BSS. The priority groups will be iterated in decreasing
* priority (i.e., the larger the priority value, the sooner the
* network is matched against the scan results). Within each priority
* group, networks will be selected based on security policy, signal
* strength, etc.
*
* Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are
* not using this priority to select the order for scanning. Instead,
* they try the networks in the order that used in the configuration
* file.
*/
int priority;
/**
* ssid - Service set identifier (network name)
*
* This is the SSID for the network. For wireless interfaces, this is
* used to select which network will be used. If set to %NULL (or
* ssid_len=0), any SSID can be used. For wired interfaces, this must
* be set to %NULL. Note: SSID may contain any characters, even nul
* (ASCII 0) and as such, this should not be assumed to be a nul
* terminated string. ssid_len defines how many characters are valid
* and the ssid field is not guaranteed to be nul terminated.
*/
u8 *ssid;
/**
* ssid_len - Length of the SSID
*/
size_t ssid_len;
/**
* bssid - BSSID
*
* If set, this network block is used only when associating with the AP
* using the configured BSSID
*
* If this is a persistent P2P group (disabled == 2), this is the GO
* Device Address.
*/
u8 bssid[ETH_ALEN];
/**
* bssid_set - Whether BSSID is configured for this network
*/
int bssid_set;
/**
* psk - WPA pre-shared key (256 bits)
*/
u8 psk[32];
/**
* psk_set - Whether PSK field is configured
*/
int psk_set;
/**
* passphrase - WPA ASCII passphrase
*
* If this is set, psk will be generated using the SSID and passphrase
* configured for the network. ASCII passphrase must be between 8 and
* 63 characters (inclusive).
*/
char *passphrase;
/**
* pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
*/
int pairwise_cipher;
/**
* group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_*
*/
int group_cipher;
/**
* key_mgmt - Bitfield of allowed key management protocols
*
* WPA_KEY_MGMT_*
*/
int key_mgmt;
/**
* proto - Bitfield of allowed protocols, WPA_PROTO_*
*/
int proto;
/**
* auth_alg - Bitfield of allowed authentication algorithms
*
* WPA_AUTH_ALG_*
*/
int auth_alg;
/**
* scan_ssid - Scan this SSID with Probe Requests
*
* scan_ssid can be used to scan for APs using hidden SSIDs.
* Note: Many drivers do not support this. ap_mode=2 can be used with
* such drivers to use hidden SSIDs.
*/
int scan_ssid;
#ifdef IEEE8021X_EAPOL
#define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0)
#define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1)
/**
* eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*)
*/
int eapol_flags;
/**
* eap - EAP peer configuration for this network
*/
struct eap_peer_config eap;
#endif /* IEEE8021X_EAPOL */
#define NUM_WEP_KEYS 4
#define MAX_WEP_KEY_LEN 16
/**
* wep_key - WEP keys
*/
u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN];
/**
* wep_key_len - WEP key lengths
*/
size_t wep_key_len[NUM_WEP_KEYS];
/**
* wep_tx_keyidx - Default key index for TX frames using WEP
*/
int wep_tx_keyidx;
/**
* proactive_key_caching - Enable proactive key caching
*
* This field can be used to enable proactive key caching which is also
* known as opportunistic PMKSA caching for WPA2. This is disabled (0)
* by default. Enable by setting this to 1.
*
* Proactive key caching is used to make supplicant assume that the APs
* are using the same PMK and generate PMKSA cache entries without
* doing RSN pre-authentication. This requires support from the AP side
* and is normally used with wireless switches that co-locate the
* authenticator.
*/
int proactive_key_caching;
/**
* mixed_cell - Whether mixed cells are allowed
*
* This option can be used to configure whether so called mixed cells,
* i.e., networks that use both plaintext and encryption in the same
* SSID, are allowed. This is disabled (0) by default. Enable by
* setting this to 1.
*/
int mixed_cell;
#ifdef IEEE8021X_EAPOL
/**
* leap - Number of EAP methods using LEAP
*
* This field should be set to 1 if LEAP is enabled. This is used to
* select IEEE 802.11 authentication algorithm.
*/
int leap;
/**
* non_leap - Number of EAP methods not using LEAP
*
* This field should be set to >0 if any EAP method other than LEAP is
* enabled. This is used to select IEEE 802.11 authentication
* algorithm.
*/
int non_leap;
/**
* eap_workaround - EAP workarounds enabled
*
* wpa_supplicant supports number of "EAP workarounds" to work around
* interoperability issues with incorrectly behaving authentication
* servers. This is recommended to be enabled by default because some
* of the issues are present in large number of authentication servers.
*
* Strict EAP conformance mode can be configured by disabling
* workarounds with eap_workaround = 0.
*/
unsigned int eap_workaround;
#endif /* IEEE8021X_EAPOL */
/**
* mode - IEEE 802.11 operation mode (Infrastucture/IBSS)
*
* 0 = infrastructure (Managed) mode, i.e., associate with an AP.
*
* 1 = IBSS (ad-hoc, peer-to-peer)
*
* 2 = AP (access point)
*
* 3 = P2P Group Owner (can be set in the configuration file)
*
* 4 = P2P Group Formation (used internally; not in configuration
* files)
*
* Note: IBSS can only be used with key_mgmt NONE (plaintext and
* static WEP) and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In
* addition, ap_scan has to be set to 2 for IBSS. WPA-None requires
* following network block options: proto=WPA, key_mgmt=WPA-NONE,
* pairwise=NONE, group=TKIP (or CCMP, but not both), and psk must also
* be set (either directly or using ASCII passphrase).
*/
enum wpas_mode {
WPAS_MODE_INFRA = 0,
WPAS_MODE_IBSS = 1,
WPAS_MODE_AP = 2,
WPAS_MODE_P2P_GO = 3,
WPAS_MODE_P2P_GROUP_FORMATION = 4,
} mode;
/**
* disabled - Whether this network is currently disabled
*
* 0 = this network can be used (default).
* 1 = this network block is disabled (can be enabled through
* ctrl_iface, e.g., with wpa_cli or wpa_gui).
* 2 = this network block includes parameters for a persistent P2P
* group (can be used with P2P ctrl_iface commands)
*/
int disabled;
/**
* peerkey - Whether PeerKey handshake for direct links is allowed
*
* This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are
* enabled.
*
* 0 = disabled (default)
* 1 = enabled
*/
int peerkey;
/**
* id_str - Network identifier string for external scripts
*
* This value is passed to external ctrl_iface monitors in
* WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR
* environment variable for action scripts.
*/
char *id_str;
#ifdef CONFIG_IEEE80211W
/**
* ieee80211w - Whether management frame protection is enabled
*
* This value is used to configure policy for management frame
* protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
*/
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */
/**
* frequency - Channel frequency in megahertz (MHz) for IBSS
*
* This value is used to configure the initial channel for IBSS (adhoc)
* networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in
* the infrastructure mode. In addition, this value is only used by the
* station that creates the IBSS. If an IBSS network with the
* configured SSID is already present, the frequency of the network
* will be used instead of this configured value.
*/
int frequency;
/**
* wpa_ptk_rekey - Maximum lifetime for PTK in seconds
*
* This value can be used to enforce rekeying of PTK to mitigate some
* attacks against TKIP deficiencies.
*/
int wpa_ptk_rekey;
/**
* scan_freq - Array of frequencies to scan or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
* megahertz (MHz) to include in scan requests when searching for this
* network. This can be used to speed up scanning when the network is
* known to not use all possible channels.
*/
int *scan_freq;
/**
* bgscan - Background scan and roaming parameters or %NULL if none
*
* This is an optional set of parameters for background scanning and
* roaming within a network (ESS) in following format:
* <bgscan module name>:<module parameters>
*/
char *bgscan;
/**
* freq_list - Array of allowed frequencies or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
* megahertz (MHz) to allow for selecting the BSS. If set, scan results
* that do not match any of the specified frequencies are not
* considered when selecting a BSS.
*/
int *freq_list;
/**
* p2p_client_list - List of P2P Clients in a persistent group (GO)
*
* This is a list of P2P Clients (P2P Device Address) that have joined
* the persistent group. This is maintained on the GO for persistent
* group entries (disabled == 2).
*/
u8 *p2p_client_list;
/**
* num_p2p_clients - Number of entries in p2p_client_list
*/
size_t num_p2p_clients;
/**
* p2p_group - Network generated as a P2P group (used internally)
*/
int p2p_group;
/**
* p2p_persistent_group - Whether this is a persistent group
*/
int p2p_persistent_group;
/**
* temporary - Whether this network is temporary and not to be saved
*/
int temporary;
/**
* export_keys - Whether keys may be exported
*
* This attribute will be set when keys are determined through
* WPS or similar so that they may be exported.
*/
int export_keys;
};
#endif /* CONFIG_SSID_H */