jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/wpa_supplicant/mesh.h

48 lines
1.4 KiB
C
Raw Normal View History

mesh: Add mesh mode routines Add routines to (de)initialize mesh interface data structures and join and leave mesh networks. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-09-01 06:23:21 +02:00
/*
* WPA Supplicant - Basic mesh mode routines
* Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#ifndef MESH_H
#define MESH_H
int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s);
void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
struct hostapd_iface *ifmsh);
mesh: Add scan result for mesh network Android 4.4 uses "BSS" command instead of "SCAN_RESULT" command. So this patch add the mesh scan result for BSS command. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-09-01 06:23:39 +02:00
int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
char *end);
mesh: Add mesh interface creation command for mesh gate The mesh gate is used to bridge (or route) between mesh network and another network. For example, mesh gate acts as router between mesh network and IEEE 802.11 BSS network. This command makes a virtual mesh interface to be used for mesh gate. This command expects to be used like this. wpa_cli -i wlan0 MESH_INTERFACE_ADD ifname=mesh0 wpa_cli -i mesh0 add_network wpa_cli -i mesh0 set_network 0 ssid '"commell_2X_mmm"' wpa_cli -i mesh0 set_network 0 mode 5 wpa_cli -i mesh0 set_network 0 frequency 2412 wpa_cli -i mesh0 set_network 0 key_mgmt SAE wpa_cli -i mesh0 set_network 0 psk '"01234567"' wpa_cli -i mesh0 mesh_group_add 0 wpa_cli -i wlan0 mesh_group_remove mesh0 Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-15 02:35:23 +01:00
int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
size_t len);
mesh: Add MESH_PEER_REMOVE command This command allows the specified mesh peer to be disconnected. Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-09 10:16:10 +01:00
int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
mesh: Add support for PMKSA caching This patch add functionality of mesh SAE PMKSA caching. If the local STA already has peer's PMKSA entry in the cache, skip SAE authentication and start AMPE with the cached value. If the peer does not support PMKSA caching or does not have the local STA's PMKSA entry in the cache, AMPE will fail and the PMKSA cache entry of the peer will be removed. Then STA retries with ordinary SAE authentication. If the peer does not support PMKSA caching and the local STA uses no_auto_peer=1, the local STA can not retry SAE authentication because NEW_PEER_CANDIDATE event cannot start SAE authentication when no_auto_peer=1. So this patch extends MESH_PEER_ADD command to use duration(sec). Throughout the duration, the local STA can start SAE authentication triggered by NEW_PEER_CANDIDATE even though no_auto_peer=1. This commit requires commit 70c93963edefa37ef84b73efb9d04ea10268341c ('SAE: Fix PMKID calculation for PMKSA cache'). Without that commit, chosen PMK comparison will fail. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-09 10:16:14 +01:00
int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
int duration);
mesh: Add mesh mode routines Add routines to (de)initialize mesh interface data structures and join and leave mesh networks. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-09-01 06:23:21 +02:00
#ifdef CONFIG_MESH
void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
const u8 *ies, size_t ie_len);
mesh: Implement mesh scanning When mesh is configured in, include the wildcard mesh id so that mesh networks are returned. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Jason Abele <jason.abele@gmail.com>
2014-09-01 06:23:32 +02:00
void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
struct wpabuf **extra_ie);
mesh: Add mesh mode routines Add routines to (de)initialize mesh interface data structures and join and leave mesh networks. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-09-01 06:23:21 +02:00
#else /* CONFIG_MESH */
static inline void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s,
const u8 *addr,
const u8 *ies, size_t ie_len)
{
}
mesh: Implement mesh scanning When mesh is configured in, include the wildcard mesh id so that mesh networks are returned. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Jason Abele <jason.abele@gmail.com>
2014-09-01 06:23:32 +02:00
static inline void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
struct wpabuf **extra_ie)
{
}
mesh: Add mesh mode routines Add routines to (de)initialize mesh interface data structures and join and leave mesh networks. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-09-01 06:23:21 +02:00
#endif /* CONFIG_MESH */
#endif /* MESH_H */
Reference in a new issue Copy permalink