hostap/src/ap/sta_info.c

1533 lines
43 KiB
C
Raw Normal View History

/*
* hostapd / Station table
* Copyright (c) 2002-2017, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "common/sae.h"
#include "common/dpp.h"
#include "radius/radius.h"
#include "radius/radius_client.h"
2010-07-18 23:30:25 +02:00
#include "p2p/p2p.h"
#include "fst/fst.h"
#include "crypto/crypto.h"
#include "hostapd.h"
#include "accounting.h"
#include "ieee802_1x.h"
#include "ieee802_11.h"
#include "ieee802_11_auth.h"
#include "wpa_auth.h"
#include "preauth_auth.h"
#include "ap_config.h"
#include "beacon.h"
#include "ap_mlme.h"
#include "vlan_init.h"
#include "p2p_hostapd.h"
#include "ap_drv_ops.h"
#include "gas_serv.h"
#include "wnm_ap.h"
#include "mbo_ap.h"
#include "ndisc_snoop.h"
#include "sta_info.h"
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
#include "vlan.h"
#include "wps_hostapd.h"
static void ap_sta_remove_in_other_bss(struct hostapd_data *hapd,
struct sta_info *sta);
static void ap_handle_session_timer(void *eloop_ctx, void *timeout_ctx);
static void ap_handle_session_warning_timer(void *eloop_ctx, void *timeout_ctx);
static void ap_sta_deauth_cb_timeout(void *eloop_ctx, void *timeout_ctx);
static void ap_sta_disassoc_cb_timeout(void *eloop_ctx, void *timeout_ctx);
static void ap_sa_query_timer(void *eloop_ctx, void *timeout_ctx);
static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta);
static void ap_sta_delayed_1x_auth_fail_cb(void *eloop_ctx, void *timeout_ctx);
int ap_for_each_sta(struct hostapd_data *hapd,
int (*cb)(struct hostapd_data *hapd, struct sta_info *sta,
void *ctx),
void *ctx)
{
struct sta_info *sta;
for (sta = hapd->sta_list; sta; sta = sta->next) {
if (cb(hapd, sta, ctx))
return 1;
}
return 0;
}
struct sta_info * ap_get_sta(struct hostapd_data *hapd, const u8 *sta)
{
struct sta_info *s;
s = hapd->sta_hash[STA_HASH(sta)];
while (s != NULL && os_memcmp(s->addr, sta, 6) != 0)
s = s->hnext;
return s;
}
#ifdef CONFIG_P2P
struct sta_info * ap_get_sta_p2p(struct hostapd_data *hapd, const u8 *addr)
{
struct sta_info *sta;
for (sta = hapd->sta_list; sta; sta = sta->next) {
const u8 *p2p_dev_addr;
if (sta->p2p_ie == NULL)
continue;
p2p_dev_addr = p2p_get_go_dev_addr(sta->p2p_ie);
if (p2p_dev_addr == NULL)
continue;
if (os_memcmp(p2p_dev_addr, addr, ETH_ALEN) == 0)
return sta;
}
return NULL;
}
#endif /* CONFIG_P2P */
static void ap_sta_list_del(struct hostapd_data *hapd, struct sta_info *sta)
{
struct sta_info *tmp;
if (hapd->sta_list == sta) {
hapd->sta_list = sta->next;
return;
}
tmp = hapd->sta_list;
while (tmp != NULL && tmp->next != sta)
tmp = tmp->next;
if (tmp == NULL) {
wpa_printf(MSG_DEBUG, "Could not remove STA " MACSTR " from "
"list.", MAC2STR(sta->addr));
} else
tmp->next = sta->next;
}
void ap_sta_hash_add(struct hostapd_data *hapd, struct sta_info *sta)
{
sta->hnext = hapd->sta_hash[STA_HASH(sta->addr)];
hapd->sta_hash[STA_HASH(sta->addr)] = sta;
}
static void ap_sta_hash_del(struct hostapd_data *hapd, struct sta_info *sta)
{
struct sta_info *s;
s = hapd->sta_hash[STA_HASH(sta->addr)];
if (s == NULL) return;
if (os_memcmp(s->addr, sta->addr, 6) == 0) {
hapd->sta_hash[STA_HASH(sta->addr)] = s->hnext;
return;
}
while (s->hnext != NULL &&
os_memcmp(s->hnext->addr, sta->addr, ETH_ALEN) != 0)
s = s->hnext;
if (s->hnext != NULL)
s->hnext = s->hnext->hnext;
else
wpa_printf(MSG_DEBUG, "AP: could not remove STA " MACSTR
" from hash table", MAC2STR(sta->addr));
}
void ap_sta_ip6addr_del(struct hostapd_data *hapd, struct sta_info *sta)
{
sta_ip6addr_del(hapd, sta);
}
void ap_free_sta(struct hostapd_data *hapd, struct sta_info *sta)
{
int set_beacon = 0;
accounting_sta_stop(hapd, sta);
/* just in case */
ap_sta_set_authorized(hapd, sta, 0);
hostapd_set_sta_flags(hapd, sta);
if (sta->flags & (WLAN_STA_WDS | WLAN_STA_MULTI_AP))
hostapd_set_wds_sta(hapd, NULL, sta->addr, sta->aid, 0);
if (sta->ipaddr)
hostapd_drv_br_delete_ip_neigh(hapd, 4, (u8 *) &sta->ipaddr);
ap_sta_ip6addr_del(hapd, sta);
if (!hapd->iface->driver_ap_teardown &&
!(sta->flags & WLAN_STA_PREAUTH)) {
hostapd_drv_sta_remove(hapd, sta->addr);
sta->added_unassoc = 0;
}
ap_sta_hash_del(hapd, sta);
ap_sta_list_del(hapd, sta);
if (sta->aid > 0)
hapd->sta_aid[(sta->aid - 1) / 32] &=
~BIT((sta->aid - 1) % 32);
hapd->num_sta--;
if (sta->nonerp_set) {
sta->nonerp_set = 0;
hapd->iface->num_sta_non_erp--;
if (hapd->iface->num_sta_non_erp == 0)
set_beacon++;
}
if (sta->no_short_slot_time_set) {
sta->no_short_slot_time_set = 0;
hapd->iface->num_sta_no_short_slot_time--;
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G
&& hapd->iface->num_sta_no_short_slot_time == 0)
set_beacon++;
}
if (sta->no_short_preamble_set) {
sta->no_short_preamble_set = 0;
hapd->iface->num_sta_no_short_preamble--;
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G
&& hapd->iface->num_sta_no_short_preamble == 0)
set_beacon++;
}
if (sta->no_ht_gf_set) {
sta->no_ht_gf_set = 0;
hapd->iface->num_sta_ht_no_gf--;
}
if (sta->no_ht_set) {
sta->no_ht_set = 0;
hapd->iface->num_sta_no_ht--;
}
if (sta->ht_20mhz_set) {
sta->ht_20mhz_set = 0;
hapd->iface->num_sta_ht_20mhz--;
}
#ifdef CONFIG_TAXONOMY
wpabuf_free(sta->probe_ie_taxonomy);
sta->probe_ie_taxonomy = NULL;
wpabuf_free(sta->assoc_ie_taxonomy);
sta->assoc_ie_taxonomy = NULL;
#endif /* CONFIG_TAXONOMY */
ht40_intolerant_remove(hapd->iface, sta);
#ifdef CONFIG_P2P
if (sta->no_p2p_set) {
sta->no_p2p_set = 0;
hapd->num_sta_no_p2p--;
if (hapd->num_sta_no_p2p == 0)
hostapd_p2p_non_p2p_sta_disconnected(hapd);
}
#endif /* CONFIG_P2P */
#ifdef NEED_AP_MLME
if (hostapd_ht_operation_update(hapd->iface) > 0)
set_beacon++;
#endif /* NEED_AP_MLME */
#ifdef CONFIG_MESH
if (hapd->mesh_sta_free_cb)
hapd->mesh_sta_free_cb(hapd, sta);
#endif /* CONFIG_MESH */
if (set_beacon)
ieee802_11_set_beacons(hapd->iface);
wpa_printf(MSG_DEBUG, "%s: cancel ap_handle_timer for " MACSTR,
__func__, MAC2STR(sta->addr));
eloop_cancel_timeout(ap_handle_timer, hapd, sta);
eloop_cancel_timeout(ap_handle_session_timer, hapd, sta);
eloop_cancel_timeout(ap_handle_session_warning_timer, hapd, sta);
ap_sta_clear_disconnect_timeouts(hapd, sta);
sae_clear_retransmit_timer(hapd, sta);
ieee802_1x_free_station(hapd, sta);
wpa_auth_sta_deinit(sta->wpa_sm);
rsn_preauth_free_station(hapd, sta);
#ifndef CONFIG_NO_RADIUS
if (hapd->radius)
radius_client_flush_auth(hapd->radius, sta->addr);
#endif /* CONFIG_NO_RADIUS */
#ifndef CONFIG_NO_VLAN
/*
* sta->wpa_sm->group needs to be released before so that
* vlan_remove_dynamic() can check that no stations are left on the
* AP_VLAN netdev.
*/
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
if (sta->vlan_id)
vlan_remove_dynamic(hapd, sta->vlan_id);
if (sta->vlan_id_bound) {
/*
* Need to remove the STA entry before potentially removing the
* VLAN.
*/
if (hapd->iface->driver_ap_teardown &&
!(sta->flags & WLAN_STA_PREAUTH)) {
hostapd_drv_sta_remove(hapd, sta->addr);
sta->added_unassoc = 0;
}
vlan_remove_dynamic(hapd, sta->vlan_id_bound);
}
#endif /* CONFIG_NO_VLAN */
os_free(sta->challenge);
os_free(sta->sa_query_trans_id);
eloop_cancel_timeout(ap_sa_query_timer, hapd, sta);
2010-07-18 23:30:25 +02:00
#ifdef CONFIG_P2P
p2p_group_notif_disassoc(hapd->p2p_group, sta->addr);
#endif /* CONFIG_P2P */
#ifdef CONFIG_INTERWORKING
if (sta->gas_dialog) {
int i;
for (i = 0; i < GAS_DIALOG_MAX; i++)
gas_serv_dialog_clear(&sta->gas_dialog[i]);
os_free(sta->gas_dialog);
}
#endif /* CONFIG_INTERWORKING */
wpabuf_free(sta->wps_ie);
wpabuf_free(sta->p2p_ie);
wpabuf_free(sta->hs20_ie);
wpabuf_free(sta->roaming_consortium);
#ifdef CONFIG_FST
wpabuf_free(sta->mb_ies);
#endif /* CONFIG_FST */
os_free(sta->ht_capabilities);
os_free(sta->vht_capabilities);
os_free(sta->vht_operation);
os_free(sta->he_capab);
os_free(sta->he_6ghz_capab);
hostapd_free_psk_list(sta->psk);
os_free(sta->identity);
os_free(sta->radius_cui);
os_free(sta->remediation_url);
os_free(sta->t_c_url);
wpabuf_free(sta->hs20_deauth_req);
os_free(sta->hs20_session_info_url);
#ifdef CONFIG_SAE
sae_clear_data(sta->sae);
os_free(sta->sae);
#endif /* CONFIG_SAE */
mbo_ap_sta_free(sta);
os_free(sta->supp_op_classes);
#ifdef CONFIG_FILS
os_free(sta->fils_pending_assoc_req);
wpabuf_free(sta->fils_hlp_resp);
wpabuf_free(sta->hlp_dhcp_discover);
eloop_cancel_timeout(fils_hlp_timeout, hapd, sta);
#ifdef CONFIG_FILS_SK_PFS
crypto_ecdh_deinit(sta->fils_ecdh);
wpabuf_clear_free(sta->fils_dh_ss);
wpabuf_free(sta->fils_g_sta);
#endif /* CONFIG_FILS_SK_PFS */
#endif /* CONFIG_FILS */
#ifdef CONFIG_OWE
bin_clear_free(sta->owe_pmk, sta->owe_pmk_len);
crypto_ecdh_deinit(sta->owe_ecdh);
#endif /* CONFIG_OWE */
#ifdef CONFIG_DPP2
dpp_pfs_free(sta->dpp_pfs);
sta->dpp_pfs = NULL;
#endif /* CONFIG_DPP2 */
os_free(sta->ext_capability);
#ifdef CONFIG_WNM_AP
eloop_cancel_timeout(ap_sta_reset_steer_flag_timer, hapd, sta);
#endif /* CONFIG_WNM_AP */
os_free(sta->ifname_wds);
#ifdef CONFIG_TESTING_OPTIONS
os_free(sta->sae_postponed_commit);
#endif /* CONFIG_TESTING_OPTIONS */
os_free(sta);
}
void hostapd_free_stas(struct hostapd_data *hapd)
{
struct sta_info *sta, *prev;
sta = hapd->sta_list;
while (sta) {
prev = sta;
if (sta->flags & WLAN_STA_AUTH) {
mlme_deauthenticate_indication(
hapd, sta, WLAN_REASON_UNSPECIFIED);
}
sta = sta->next;
wpa_printf(MSG_DEBUG, "Removing station " MACSTR,
MAC2STR(prev->addr));
ap_free_sta(hapd, prev);
}
}
/**
* ap_handle_timer - Per STA timer handler
* @eloop_ctx: struct hostapd_data *
* @timeout_ctx: struct sta_info *
*
* This function is called to check station activity and to remove inactive
* stations.
*/
void ap_handle_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
unsigned long next_time = 0;
int reason;
wpa_printf(MSG_DEBUG, "%s: %s: " MACSTR " flags=0x%x timeout_next=%d",
hapd->conf->iface, __func__, MAC2STR(sta->addr), sta->flags,
sta->timeout_next);
if (sta->timeout_next == STA_REMOVE) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"local deauth request");
ap_free_sta(hapd, sta);
return;
}
if ((sta->flags & WLAN_STA_ASSOC) &&
(sta->timeout_next == STA_NULLFUNC ||
sta->timeout_next == STA_DISASSOC)) {
int inactive_sec;
/*
* Add random value to timeout so that we don't end up bouncing
* all stations at the same time if we have lots of associated
* stations that are idle (but keep re-associating).
*/
int fuzz = os_random() % 20;
inactive_sec = hostapd_drv_get_inact_sec(hapd, sta->addr);
if (inactive_sec == -1) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Check inactivity: Could not "
"get station info from kernel driver for "
MACSTR, MAC2STR(sta->addr));
/*
* The driver may not support this functionality.
* Anyway, try again after the next inactivity timeout,
* but do not disconnect the station now.
*/
next_time = hapd->conf->ap_max_inactivity + fuzz;
} else if (inactive_sec == -ENOENT) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Station " MACSTR " has lost its driver entry",
MAC2STR(sta->addr));
/* Avoid sending client probe on removed client */
sta->timeout_next = STA_DISASSOC;
goto skip_poll;
} else if (inactive_sec < hapd->conf->ap_max_inactivity) {
/* station activity detected; reset timeout state */
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Station " MACSTR " has been active %is ago",
MAC2STR(sta->addr), inactive_sec);
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity + fuzz -
inactive_sec;
} else {
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Station " MACSTR " has been "
"inactive too long: %d sec, max allowed: %d",
MAC2STR(sta->addr), inactive_sec,
hapd->conf->ap_max_inactivity);
if (hapd->conf->skip_inactivity_poll)
sta->timeout_next = STA_DISASSOC;
}
}
if ((sta->flags & WLAN_STA_ASSOC) &&
sta->timeout_next == STA_DISASSOC &&
!(sta->flags & WLAN_STA_PENDING_POLL) &&
!hapd->conf->skip_inactivity_poll) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR
" has ACKed data poll", MAC2STR(sta->addr));
/* data nullfunc frame poll did not produce TX errors; assume
* station ACKed it */
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity;
}
skip_poll:
if (next_time) {
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%lu seconds)",
__func__, MAC2STR(sta->addr), next_time);
eloop_register_timeout(next_time, 0, ap_handle_timer, hapd,
sta);
return;
}
if (sta->timeout_next == STA_NULLFUNC &&
(sta->flags & WLAN_STA_ASSOC)) {
wpa_printf(MSG_DEBUG, " Polling STA");
sta->flags |= WLAN_STA_PENDING_POLL;
hostapd_drv_poll_client(hapd, hapd->own_addr, sta->addr,
sta->flags & WLAN_STA_WMM);
} else if (sta->timeout_next != STA_REMOVE) {
int deauth = sta->timeout_next == STA_DEAUTH;
if (!deauth && !(sta->flags & WLAN_STA_ASSOC)) {
/* Cannot disassociate not-associated STA, so move
* directly to deauthentication. */
sta->timeout_next = STA_DEAUTH;
deauth = 1;
}
wpa_dbg(hapd->msg_ctx, MSG_DEBUG,
"Timeout, sending %s info to STA " MACSTR,
deauth ? "deauthentication" : "disassociation",
MAC2STR(sta->addr));
if (deauth) {
hostapd_drv_sta_deauth(
hapd, sta->addr,
WLAN_REASON_PREV_AUTH_NOT_VALID);
} else {
reason = (sta->timeout_next == STA_DISASSOC) ?
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY :
WLAN_REASON_PREV_AUTH_NOT_VALID;
hostapd_drv_sta_disassoc(hapd, sta->addr, reason);
}
}
switch (sta->timeout_next) {
case STA_NULLFUNC:
sta->timeout_next = STA_DISASSOC;
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%d seconds - AP_DISASSOC_DELAY)",
__func__, MAC2STR(sta->addr), AP_DISASSOC_DELAY);
eloop_register_timeout(AP_DISASSOC_DELAY, 0, ap_handle_timer,
hapd, sta);
break;
case STA_DISASSOC:
case STA_DISASSOC_FROM_CLI:
ap_sta_set_authorized(hapd, sta, 0);
sta->flags &= ~WLAN_STA_ASSOC;
hostapd_set_sta_flags(hapd, sta);
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(hapd, sta);
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "disassociated due to "
"inactivity");
reason = (sta->timeout_next == STA_DISASSOC) ?
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY :
WLAN_REASON_PREV_AUTH_NOT_VALID;
sta->timeout_next = STA_DEAUTH;
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%d seconds - AP_DEAUTH_DELAY)",
__func__, MAC2STR(sta->addr), AP_DEAUTH_DELAY);
eloop_register_timeout(AP_DEAUTH_DELAY, 0, ap_handle_timer,
hapd, sta);
mlme_disassociate_indication(hapd, sta, reason);
break;
case STA_DEAUTH:
case STA_REMOVE:
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"inactivity (timer DEAUTH/REMOVE)");
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
mlme_deauthenticate_indication(
hapd, sta,
WLAN_REASON_PREV_AUTH_NOT_VALID);
ap_free_sta(hapd, sta);
break;
}
}
static void ap_handle_session_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
wpa_printf(MSG_DEBUG, "%s: Session timer for STA " MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
if (!(sta->flags & (WLAN_STA_AUTH | WLAN_STA_ASSOC |
WLAN_STA_AUTHORIZED))) {
if (sta->flags & WLAN_STA_GAS) {
wpa_printf(MSG_DEBUG, "GAS: Remove temporary STA "
"entry " MACSTR, MAC2STR(sta->addr));
ap_free_sta(hapd, sta);
}
return;
}
hostapd_drv_sta_deauth(hapd, sta->addr,
WLAN_REASON_PREV_AUTH_NOT_VALID);
mlme_deauthenticate_indication(hapd, sta,
WLAN_REASON_PREV_AUTH_NOT_VALID);
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"session timeout");
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_SESSION_TIMEOUT;
ap_free_sta(hapd, sta);
}
void ap_sta_replenish_timeout(struct hostapd_data *hapd, struct sta_info *sta,
u32 session_timeout)
{
if (eloop_replenish_timeout(session_timeout, 0,
ap_handle_session_timer, hapd, sta) == 1) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG, "setting session timeout "
"to %d seconds", session_timeout);
}
}
void ap_sta_session_timeout(struct hostapd_data *hapd, struct sta_info *sta,
u32 session_timeout)
{
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG, "setting session timeout to %d "
"seconds", session_timeout);
eloop_cancel_timeout(ap_handle_session_timer, hapd, sta);
eloop_register_timeout(session_timeout, 0, ap_handle_session_timer,
hapd, sta);
}
void ap_sta_no_session_timeout(struct hostapd_data *hapd, struct sta_info *sta)
{
eloop_cancel_timeout(ap_handle_session_timer, hapd, sta);
}
static void ap_handle_session_warning_timer(void *eloop_ctx, void *timeout_ctx)
{
#ifdef CONFIG_WNM_AP
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
wpa_printf(MSG_DEBUG, "%s: WNM: Session warning time reached for "
MACSTR, hapd->conf->iface, MAC2STR(sta->addr));
if (sta->hs20_session_info_url == NULL)
return;
wnm_send_ess_disassoc_imminent(hapd, sta, sta->hs20_session_info_url,
sta->hs20_disassoc_timer);
#endif /* CONFIG_WNM_AP */
}
void ap_sta_session_warning_timeout(struct hostapd_data *hapd,
struct sta_info *sta, int warning_time)
{
eloop_cancel_timeout(ap_handle_session_warning_timer, hapd, sta);
eloop_register_timeout(warning_time, 0, ap_handle_session_warning_timer,
hapd, sta);
}
struct sta_info * ap_sta_add(struct hostapd_data *hapd, const u8 *addr)
{
struct sta_info *sta;
int i;
sta = ap_get_sta(hapd, addr);
if (sta)
return sta;
wpa_printf(MSG_DEBUG, " New STA");
if (hapd->num_sta >= hapd->conf->max_num_sta) {
/* FIX: might try to remove some old STAs first? */
wpa_printf(MSG_DEBUG, "no more room for new STAs (%d/%d)",
hapd->num_sta, hapd->conf->max_num_sta);
return NULL;
}
sta = os_zalloc(sizeof(struct sta_info));
if (sta == NULL) {
wpa_printf(MSG_ERROR, "malloc failed");
return NULL;
}
sta->acct_interim_interval = hapd->conf->acct_interim_interval;
if (accounting_sta_get_id(hapd, sta) < 0) {
os_free(sta);
return NULL;
}
for (i = 0; i < WLAN_SUPP_RATES_MAX; i++) {
if (!hapd->iface->basic_rates)
break;
if (hapd->iface->basic_rates[i] < 0)
break;
sta->supported_rates[i] = hapd->iface->basic_rates[i] / 5;
}
sta->supported_rates_len = i;
if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_INACTIVITY_TIMER)) {
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%d seconds - ap_max_inactivity)",
__func__, MAC2STR(addr),
hapd->conf->ap_max_inactivity);
eloop_register_timeout(hapd->conf->ap_max_inactivity, 0,
ap_handle_timer, hapd, sta);
}
/* initialize STA info data */
os_memcpy(sta->addr, addr, ETH_ALEN);
sta->next = hapd->sta_list;
hapd->sta_list = sta;
hapd->num_sta++;
ap_sta_hash_add(hapd, sta);
ap_sta_remove_in_other_bss(hapd, sta);
sta->last_seq_ctrl = WLAN_INVALID_MGMT_SEQ;
dl_list_init(&sta->ip6addr);
#ifdef CONFIG_TAXONOMY
sta_track_claim_taxonomy_info(hapd->iface, addr,
&sta->probe_ie_taxonomy);
#endif /* CONFIG_TAXONOMY */
return sta;
}
static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
if (sta->ipaddr)
hostapd_drv_br_delete_ip_neigh(hapd, 4, (u8 *) &sta->ipaddr);
ap_sta_ip6addr_del(hapd, sta);
wpa_printf(MSG_DEBUG, "%s: Removing STA " MACSTR " from kernel driver",
hapd->conf->iface, MAC2STR(sta->addr));
if (hostapd_drv_sta_remove(hapd, sta->addr) &&
sta->flags & WLAN_STA_ASSOC) {
wpa_printf(MSG_DEBUG, "%s: Could not remove station " MACSTR
" from kernel driver",
hapd->conf->iface, MAC2STR(sta->addr));
return -1;
}
sta->added_unassoc = 0;
return 0;
}
static void ap_sta_remove_in_other_bss(struct hostapd_data *hapd,
struct sta_info *sta)
{
struct hostapd_iface *iface = hapd->iface;
size_t i;
for (i = 0; i < iface->num_bss; i++) {
struct hostapd_data *bss = iface->bss[i];
struct sta_info *sta2;
/* bss should always be set during operation, but it may be
* NULL during reconfiguration. Assume the STA is not
* associated to another BSS in that case to avoid NULL pointer
* dereferences. */
if (bss == hapd || bss == NULL)
continue;
sta2 = ap_get_sta(bss, sta->addr);
if (!sta2)
continue;
wpa_printf(MSG_DEBUG, "%s: disconnect old STA " MACSTR
" association from another BSS %s",
hapd->conf->iface, MAC2STR(sta2->addr),
bss->conf->iface);
ap_sta_disconnect(bss, sta2, sta2->addr,
WLAN_REASON_PREV_AUTH_NOT_VALID);
}
}
static void ap_sta_disassoc_cb_timeout(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
wpa_printf(MSG_DEBUG, "%s: Disassociation callback for STA " MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
ap_sta_remove(hapd, sta);
mlme_disassociate_indication(hapd, sta, sta->disassoc_reason);
}
void ap_sta_disassociate(struct hostapd_data *hapd, struct sta_info *sta,
u16 reason)
{
wpa_printf(MSG_DEBUG, "%s: disassociate STA " MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
sta->last_seq_ctrl = WLAN_INVALID_MGMT_SEQ;
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211AD) {
/* Skip deauthentication in DMG/IEEE 802.11ad */
sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC |
WLAN_STA_ASSOC_REQ_OK);
sta->timeout_next = STA_REMOVE;
} else {
sta->flags &= ~(WLAN_STA_ASSOC | WLAN_STA_ASSOC_REQ_OK);
sta->timeout_next = STA_DEAUTH;
}
ap_sta_set_authorized(hapd, sta, 0);
hostapd_set_sta_flags(hapd, sta);
wpa_printf(MSG_DEBUG, "%s: reschedule ap_handle_timer timeout "
"for " MACSTR " (%d seconds - "
"AP_MAX_INACTIVITY_AFTER_DISASSOC)",
__func__, MAC2STR(sta->addr),
AP_MAX_INACTIVITY_AFTER_DISASSOC);
eloop_cancel_timeout(ap_handle_timer, hapd, sta);
eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DISASSOC, 0,
ap_handle_timer, hapd, sta);
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(hapd, sta);
wpa_auth_sta_deinit(sta->wpa_sm);
sta->wpa_sm = NULL;
sta->disassoc_reason = reason;
sta->flags |= WLAN_STA_PENDING_DISASSOC_CB;
eloop_cancel_timeout(ap_sta_disassoc_cb_timeout, hapd, sta);
eloop_register_timeout(hapd->iface->drv_flags &
WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS ? 2 : 0, 0,
ap_sta_disassoc_cb_timeout, hapd, sta);
}
static void ap_sta_deauth_cb_timeout(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
wpa_printf(MSG_DEBUG, "%s: Deauthentication callback for STA " MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
ap_sta_remove(hapd, sta);
mlme_deauthenticate_indication(hapd, sta, sta->deauth_reason);
}
void ap_sta_deauthenticate(struct hostapd_data *hapd, struct sta_info *sta,
u16 reason)
{
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211AD) {
/* Deauthentication is not used in DMG/IEEE 802.11ad;
* disassociate the STA instead. */
ap_sta_disassociate(hapd, sta, reason);
return;
}
wpa_printf(MSG_DEBUG, "%s: deauthenticate STA " MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
sta->last_seq_ctrl = WLAN_INVALID_MGMT_SEQ;
sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_REQ_OK);
ap_sta_set_authorized(hapd, sta, 0);
hostapd_set_sta_flags(hapd, sta);
sta->timeout_next = STA_REMOVE;
wpa_printf(MSG_DEBUG, "%s: reschedule ap_handle_timer timeout "
"for " MACSTR " (%d seconds - "
"AP_MAX_INACTIVITY_AFTER_DEAUTH)",
__func__, MAC2STR(sta->addr),
AP_MAX_INACTIVITY_AFTER_DEAUTH);
eloop_cancel_timeout(ap_handle_timer, hapd, sta);
eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DEAUTH, 0,
ap_handle_timer, hapd, sta);
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(hapd, sta);
sta->deauth_reason = reason;
sta->flags |= WLAN_STA_PENDING_DEAUTH_CB;
eloop_cancel_timeout(ap_sta_deauth_cb_timeout, hapd, sta);
eloop_register_timeout(hapd->iface->drv_flags &
WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS ? 2 : 0, 0,
ap_sta_deauth_cb_timeout, hapd, sta);
}
#ifdef CONFIG_WPS
int ap_sta_wps_cancel(struct hostapd_data *hapd,
struct sta_info *sta, void *ctx)
{
if (sta && (sta->flags & WLAN_STA_WPS)) {
ap_sta_deauthenticate(hapd, sta,
WLAN_REASON_PREV_AUTH_NOT_VALID);
wpa_printf(MSG_DEBUG, "WPS: %s: Deauth sta=" MACSTR,
__func__, MAC2STR(sta->addr));
return 1;
}
return 0;
}
#endif /* CONFIG_WPS */
static int ap_sta_get_free_vlan_id(struct hostapd_data *hapd)
{
struct hostapd_vlan *vlan;
int vlan_id = MAX_VLAN_ID + 2;
retry:
for (vlan = hapd->conf->vlan; vlan; vlan = vlan->next) {
if (vlan->vlan_id == vlan_id) {
vlan_id++;
goto retry;
}
}
return vlan_id;
}
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
int ap_sta_set_vlan(struct hostapd_data *hapd, struct sta_info *sta,
struct vlan_description *vlan_desc)
{
struct hostapd_vlan *vlan = NULL, *wildcard_vlan = NULL;
int old_vlan_id, vlan_id = 0, ret = 0;
/* Check if there is something to do */
if (hapd->conf->ssid.per_sta_vif && !sta->vlan_id) {
/* This sta is lacking its own vif */
} else if (hapd->conf->ssid.dynamic_vlan == DYNAMIC_VLAN_DISABLED &&
!hapd->conf->ssid.per_sta_vif && sta->vlan_id) {
/* sta->vlan_id needs to be reset */
} else if (!vlan_compare(vlan_desc, sta->vlan_desc)) {
return 0; /* nothing to change */
}
/* Now the real VLAN changed or the STA just needs its own vif */
if (hapd->conf->ssid.per_sta_vif) {
/* Assign a new vif, always */
/* find a free vlan_id sufficiently big */
vlan_id = ap_sta_get_free_vlan_id(hapd);
/* Get wildcard VLAN */
for (vlan = hapd->conf->vlan; vlan; vlan = vlan->next) {
if (vlan->vlan_id == VLAN_ID_WILDCARD)
break;
}
if (!vlan) {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"per_sta_vif missing wildcard");
vlan_id = 0;
ret = -1;
goto done;
}
} else if (vlan_desc && vlan_desc->notempty) {
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
for (vlan = hapd->conf->vlan; vlan; vlan = vlan->next) {
if (!vlan_compare(&vlan->vlan_desc, vlan_desc))
break;
if (vlan->vlan_id == VLAN_ID_WILDCARD)
wildcard_vlan = vlan;
}
if (vlan) {
vlan_id = vlan->vlan_id;
} else if (wildcard_vlan) {
vlan = wildcard_vlan;
vlan_id = vlan_desc->untagged;
if (vlan_desc->tagged[0]) {
/* Tagged VLAN configuration */
vlan_id = ap_sta_get_free_vlan_id(hapd);
}
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
} else {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"missing vlan and wildcard for vlan=%d%s",
vlan_desc->untagged,
vlan_desc->tagged[0] ? "+" : "");
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
vlan_id = 0;
ret = -1;
goto done;
}
}
if (vlan && vlan->vlan_id == VLAN_ID_WILDCARD) {
vlan = vlan_add_dynamic(hapd, vlan, vlan_id, vlan_desc);
if (vlan == NULL) {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"could not add dynamic VLAN interface for vlan=%d%s",
vlan_desc ? vlan_desc->untagged : -1,
(vlan_desc && vlan_desc->tagged[0]) ?
"+" : "");
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
vlan_id = 0;
ret = -1;
goto done;
}
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"added new dynamic VLAN interface '%s'",
vlan->ifname);
} else if (vlan && vlan->dynamic_vlan > 0) {
vlan->dynamic_vlan++;
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"updated existing dynamic VLAN interface '%s'",
vlan->ifname);
}
done:
old_vlan_id = sta->vlan_id;
sta->vlan_id = vlan_id;
sta->vlan_desc = vlan ? &vlan->vlan_desc : NULL;
if (vlan_id != old_vlan_id && old_vlan_id)
vlan_remove_dynamic(hapd, old_vlan_id);
return ret;
}
int ap_sta_bind_vlan(struct hostapd_data *hapd, struct sta_info *sta)
{
#ifndef CONFIG_NO_VLAN
const char *iface;
struct hostapd_vlan *vlan = NULL;
2010-04-15 22:44:10 +02:00
int ret;
int old_vlanid = sta->vlan_id_bound;
if ((sta->flags & WLAN_STA_WDS) && sta->vlan_id == 0) {
wpa_printf(MSG_DEBUG,
"Do not override WDS VLAN assignment for STA "
MACSTR, MAC2STR(sta->addr));
return 0;
}
iface = hapd->conf->iface;
if (hapd->conf->ssid.vlan[0])
iface = hapd->conf->ssid.vlan;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
if (sta->vlan_id > 0) {
for (vlan = hapd->conf->vlan; vlan; vlan = vlan->next) {
if (vlan->vlan_id == sta->vlan_id)
break;
}
if (vlan)
iface = vlan->ifname;
}
/*
* Do not increment ref counters if the VLAN ID remains same, but do
* not skip hostapd_drv_set_sta_vlan() as hostapd_drv_sta_remove() might
* have been called before.
*/
if (sta->vlan_id == old_vlanid)
goto skip_counting;
if (sta->vlan_id > 0 && !vlan &&
!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_VLAN_OFFLOAD)) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG, "could not find VLAN for "
"binding station to (vlan_id=%d)",
sta->vlan_id);
ret = -1;
goto done;
VLAN: Separate station grouping and uplink configuration Separate uplink configuration (IEEE 802.1q VID) and grouping of stations into AP_VLAN interfaces. The int vlan_id will continue to identify the AP_VLAN interface the station should be assigned to. Each AP_VLAN interface corresponds to an instance of struct hostapd_vlan that is uniquely identified by int vlan_id within an BSS. New: Each station and struct hostapd_vlan holds a struct vlan_description vlan_desc member that describes the uplink configuration requested. Currently this is just an int untagged IEEE 802.1q VID, but can be extended to tagged VLANs and other settings easily. When the station was about to be assigned its vlan_id, vlan_desc and vlan_id will now be set simultaneously by ap_sta_set_vlan(). So sta->vlan_id can still be tested for whether the station needs to be moved to an AP_VLAN interface. To ease addition of tagged VLAN support, a member notempty is added to struct vlan_description. Is is set to 1 if an untagged or tagged VLAN assignment is requested and needs to be validated. The inverted form allows os_zalloc() to initialize an empty description. Though not depended on by the code, vlan_id assignment ensures: * vlan_id = 0 will continue to mean no AP_VLAN interface * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id with no per_sta_vif and no extra tagged vlan. * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans. This way struct wpa_group and drivers API do not need to be changed in order to implement tagged VLANs or per_sta_vif support. DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only, thus grouping of the stations for per_sta_vif can be used with DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct hostapd_vlan is still used to manage AP_VLAN interfaces. MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will continue to refer to int vlan_id. Renaming vlan_id to vlan_desc when type changed from int to struct vlan_description was avoided when vlan_id was also used in a way that did not depend on its type (for example, when passed to another function). Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN %d" will refer to untagged IEEE 802.1q VID. Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-01-21 14:51:56 +01:00
} else if (vlan && vlan->dynamic_vlan > 0) {
vlan->dynamic_vlan++;
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"updated existing dynamic VLAN interface '%s'",
iface);
}
/* ref counters have been increased, so mark the station */
sta->vlan_id_bound = sta->vlan_id;
skip_counting:
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG, "binding station to interface "
"'%s'", iface);
if (wpa_auth_sta_set_vlan(sta->wpa_sm, sta->vlan_id) < 0)
wpa_printf(MSG_INFO, "Failed to update VLAN-ID for WPA");
ret = hostapd_drv_set_sta_vlan(iface, hapd, sta->addr, sta->vlan_id);
2010-04-15 22:44:10 +02:00
if (ret < 0) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG, "could not bind the STA "
"entry to vlan_id=%d", sta->vlan_id);
}
/* During 1x reauth, if the vlan id changes, then remove the old id. */
if (old_vlanid > 0 && old_vlanid != sta->vlan_id)
vlan_remove_dynamic(hapd, old_vlanid);
done:
2010-04-15 22:44:10 +02:00
return ret;
#else /* CONFIG_NO_VLAN */
return 0;
#endif /* CONFIG_NO_VLAN */
}
int ap_check_sa_query_timeout(struct hostapd_data *hapd, struct sta_info *sta)
{
u32 tu;
struct os_reltime now, passed;
os_get_reltime(&now);
os_reltime_sub(&now, &sta->sa_query_start, &passed);
tu = (passed.sec * 1000000 + passed.usec) / 1024;
if (hapd->conf->assoc_sa_query_max_timeout < tu) {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"association SA Query timed out");
sta->sa_query_timed_out = 1;
os_free(sta->sa_query_trans_id);
sta->sa_query_trans_id = NULL;
sta->sa_query_count = 0;
eloop_cancel_timeout(ap_sa_query_timer, hapd, sta);
return 1;
}
return 0;
}
static void ap_sa_query_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
unsigned int timeout, sec, usec;
u8 *trans_id, *nbuf;
wpa_printf(MSG_DEBUG, "%s: SA Query timer for STA " MACSTR
" (count=%d)",
hapd->conf->iface, MAC2STR(sta->addr), sta->sa_query_count);
if (sta->sa_query_count > 0 &&
ap_check_sa_query_timeout(hapd, sta))
return;
if (sta->sa_query_count >= 1000)
return;
nbuf = os_realloc_array(sta->sa_query_trans_id,
sta->sa_query_count + 1,
WLAN_SA_QUERY_TR_ID_LEN);
if (nbuf == NULL)
return;
if (sta->sa_query_count == 0) {
/* Starting a new SA Query procedure */
os_get_reltime(&sta->sa_query_start);
}
trans_id = nbuf + sta->sa_query_count * WLAN_SA_QUERY_TR_ID_LEN;
sta->sa_query_trans_id = nbuf;
sta->sa_query_count++;
if (os_get_random(trans_id, WLAN_SA_QUERY_TR_ID_LEN) < 0) {
/*
* We don't really care which ID is used here, so simply
* hardcode this if the mostly theoretical os_get_random()
* failure happens.
*/
trans_id[0] = 0x12;
trans_id[1] = 0x34;
}
timeout = hapd->conf->assoc_sa_query_retry_timeout;
sec = ((timeout / 1000) * 1024) / 1000;
usec = (timeout % 1000) * 1024;
eloop_register_timeout(sec, usec, ap_sa_query_timer, hapd, sta);
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"association SA Query attempt %d", sta->sa_query_count);
ieee802_11_send_sa_query_req(hapd, sta->addr, trans_id);
}
void ap_sta_start_sa_query(struct hostapd_data *hapd, struct sta_info *sta)
{
ap_sa_query_timer(hapd, sta);
}
void ap_sta_stop_sa_query(struct hostapd_data *hapd, struct sta_info *sta)
{
eloop_cancel_timeout(ap_sa_query_timer, hapd, sta);
os_free(sta->sa_query_trans_id);
sta->sa_query_trans_id = NULL;
sta->sa_query_count = 0;
}
const char * ap_sta_wpa_get_keyid(struct hostapd_data *hapd,
struct sta_info *sta)
{
struct hostapd_wpa_psk *psk;
struct hostapd_ssid *ssid;
const u8 *pmk;
int pmk_len;
ssid = &hapd->conf->ssid;
pmk = wpa_auth_get_pmk(sta->wpa_sm, &pmk_len);
if (!pmk || pmk_len != PMK_LEN)
return NULL;
for (psk = ssid->wpa_psk; psk; psk = psk->next)
if (os_memcmp(pmk, psk->psk, PMK_LEN) == 0)
break;
if (!psk)
return NULL;
if (!psk || !psk->keyid[0])
return NULL;
return psk->keyid;
}
void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
int authorized)
{
const u8 *dev_addr = NULL;
char buf[100];
#ifdef CONFIG_P2P
u8 addr[ETH_ALEN];
u8 ip_addr_buf[4];
#endif /* CONFIG_P2P */
if (!!authorized == !!(sta->flags & WLAN_STA_AUTHORIZED))
return;
if (authorized)
sta->flags |= WLAN_STA_AUTHORIZED;
else
sta->flags &= ~WLAN_STA_AUTHORIZED;
#ifdef CONFIG_P2P
if (hapd->p2p_group == NULL) {
if (sta->p2p_ie != NULL &&
p2p_parse_dev_addr_in_p2p_ie(sta->p2p_ie, addr) == 0)
dev_addr = addr;
} else
dev_addr = p2p_group_get_dev_addr(hapd->p2p_group, sta->addr);
if (dev_addr)
os_snprintf(buf, sizeof(buf), MACSTR " p2p_dev_addr=" MACSTR,
MAC2STR(sta->addr), MAC2STR(dev_addr));
else
#endif /* CONFIG_P2P */
os_snprintf(buf, sizeof(buf), MACSTR, MAC2STR(sta->addr));
if (hapd->sta_authorized_cb)
hapd->sta_authorized_cb(hapd->sta_authorized_cb_ctx,
sta->addr, authorized, dev_addr);
if (authorized) {
const char *keyid;
char keyid_buf[100];
char ip_addr[100];
keyid_buf[0] = '\0';
ip_addr[0] = '\0';
#ifdef CONFIG_P2P
if (wpa_auth_get_ip_addr(sta->wpa_sm, ip_addr_buf) == 0) {
os_snprintf(ip_addr, sizeof(ip_addr),
" ip_addr=%u.%u.%u.%u",
ip_addr_buf[0], ip_addr_buf[1],
ip_addr_buf[2], ip_addr_buf[3]);
}
#endif /* CONFIG_P2P */
keyid = ap_sta_wpa_get_keyid(hapd, sta);
if (keyid) {
os_snprintf(keyid_buf, sizeof(keyid_buf),
" keyid=%s", keyid);
}
wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s",
buf, ip_addr, keyid_buf);
if (hapd->msg_ctx_parent &&
hapd->msg_ctx_parent != hapd->msg_ctx)
wpa_msg_no_global(hapd->msg_ctx_parent, MSG_INFO,
AP_STA_CONNECTED "%s%s%s",
buf, ip_addr, keyid_buf);
} else {
wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED "%s", buf);
if (hapd->msg_ctx_parent &&
hapd->msg_ctx_parent != hapd->msg_ctx)
wpa_msg_no_global(hapd->msg_ctx_parent, MSG_INFO,
AP_STA_DISCONNECTED "%s", buf);
}
#ifdef CONFIG_FST
if (hapd->iface->fst) {
if (authorized)
fst_notify_peer_connected(hapd->iface->fst, sta->addr);
else
fst_notify_peer_disconnected(hapd->iface->fst,
sta->addr);
}
#endif /* CONFIG_FST */
}
void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
const u8 *addr, u16 reason)
{
if (sta)
wpa_printf(MSG_DEBUG, "%s: %s STA " MACSTR " reason=%u",
hapd->conf->iface, __func__, MAC2STR(sta->addr),
reason);
else if (addr)
wpa_printf(MSG_DEBUG, "%s: %s addr " MACSTR " reason=%u",
hapd->conf->iface, __func__, MAC2STR(addr),
reason);
if (sta == NULL && addr)
sta = ap_get_sta(hapd, addr);
if (addr)
hostapd_drv_sta_deauth(hapd, addr, reason);
if (sta == NULL)
return;
ap_sta_set_authorized(hapd, sta, 0);
sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
hostapd_set_sta_flags(hapd, sta);
wpa_auth_sm_event(sta->wpa_sm, WPA_DEAUTH);
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
wpa_printf(MSG_DEBUG, "%s: %s: reschedule ap_handle_timer timeout "
"for " MACSTR " (%d seconds - "
"AP_MAX_INACTIVITY_AFTER_DEAUTH)",
hapd->conf->iface, __func__, MAC2STR(sta->addr),
AP_MAX_INACTIVITY_AFTER_DEAUTH);
eloop_cancel_timeout(ap_handle_timer, hapd, sta);
eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DEAUTH, 0,
ap_handle_timer, hapd, sta);
sta->timeout_next = STA_REMOVE;
if (hapd->iface->current_mode &&
hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211AD) {
/* Deauthentication is not used in DMG/IEEE 802.11ad;
* disassociate the STA instead. */
sta->disassoc_reason = reason;
sta->flags |= WLAN_STA_PENDING_DISASSOC_CB;
eloop_cancel_timeout(ap_sta_disassoc_cb_timeout, hapd, sta);
eloop_register_timeout(hapd->iface->drv_flags &
WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS ?
2 : 0, 0, ap_sta_disassoc_cb_timeout,
hapd, sta);
return;
}
sta->deauth_reason = reason;
sta->flags |= WLAN_STA_PENDING_DEAUTH_CB;
eloop_cancel_timeout(ap_sta_deauth_cb_timeout, hapd, sta);
eloop_register_timeout(hapd->iface->drv_flags &
WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS ? 2 : 0, 0,
ap_sta_deauth_cb_timeout, hapd, sta);
}
void ap_sta_deauth_cb(struct hostapd_data *hapd, struct sta_info *sta)
{
if (!(sta->flags & WLAN_STA_PENDING_DEAUTH_CB)) {
wpa_printf(MSG_DEBUG, "Ignore deauth cb for test frame");
return;
}
sta->flags &= ~WLAN_STA_PENDING_DEAUTH_CB;
eloop_cancel_timeout(ap_sta_deauth_cb_timeout, hapd, sta);
ap_sta_deauth_cb_timeout(hapd, sta);
}
void ap_sta_disassoc_cb(struct hostapd_data *hapd, struct sta_info *sta)
{
if (!(sta->flags & WLAN_STA_PENDING_DISASSOC_CB)) {
wpa_printf(MSG_DEBUG, "Ignore disassoc cb for test frame");
return;
}
sta->flags &= ~WLAN_STA_PENDING_DISASSOC_CB;
eloop_cancel_timeout(ap_sta_disassoc_cb_timeout, hapd, sta);
ap_sta_disassoc_cb_timeout(hapd, sta);
}
void ap_sta_clear_disconnect_timeouts(struct hostapd_data *hapd,
struct sta_info *sta)
{
if (eloop_cancel_timeout(ap_sta_deauth_cb_timeout, hapd, sta) > 0)
wpa_printf(MSG_DEBUG,
"%s: Removed ap_sta_deauth_cb_timeout timeout for "
MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
if (eloop_cancel_timeout(ap_sta_disassoc_cb_timeout, hapd, sta) > 0)
wpa_printf(MSG_DEBUG,
"%s: Removed ap_sta_disassoc_cb_timeout timeout for "
MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
if (eloop_cancel_timeout(ap_sta_delayed_1x_auth_fail_cb, hapd, sta) > 0)
{
wpa_printf(MSG_DEBUG,
"%s: Removed ap_sta_delayed_1x_auth_fail_cb timeout for "
MACSTR,
hapd->conf->iface, MAC2STR(sta->addr));
if (sta->flags & WLAN_STA_WPS)
hostapd_wps_eap_completed(hapd);
}
}
int ap_sta_flags_txt(u32 flags, char *buf, size_t buflen)
{
int res;
buf[0] = '\0';
res = os_snprintf(buf, buflen,
"%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
(flags & WLAN_STA_AUTH ? "[AUTH]" : ""),
(flags & WLAN_STA_ASSOC ? "[ASSOC]" : ""),
(flags & WLAN_STA_AUTHORIZED ? "[AUTHORIZED]" : ""),
(flags & WLAN_STA_PENDING_POLL ? "[PENDING_POLL" :
""),
(flags & WLAN_STA_SHORT_PREAMBLE ?
"[SHORT_PREAMBLE]" : ""),
(flags & WLAN_STA_PREAUTH ? "[PREAUTH]" : ""),
(flags & WLAN_STA_WMM ? "[WMM]" : ""),
(flags & WLAN_STA_MFP ? "[MFP]" : ""),
(flags & WLAN_STA_WPS ? "[WPS]" : ""),
(flags & WLAN_STA_MAYBE_WPS ? "[MAYBE_WPS]" : ""),
(flags & WLAN_STA_WDS ? "[WDS]" : ""),
(flags & WLAN_STA_NONERP ? "[NonERP]" : ""),
(flags & WLAN_STA_WPS2 ? "[WPS2]" : ""),
(flags & WLAN_STA_GAS ? "[GAS]" : ""),
(flags & WLAN_STA_HT ? "[HT]" : ""),
(flags & WLAN_STA_VHT ? "[VHT]" : ""),
(flags & WLAN_STA_HE ? "[HE]" : ""),
(flags & WLAN_STA_6GHZ ? "[6GHZ]" : ""),
(flags & WLAN_STA_VENDOR_VHT ? "[VENDOR_VHT]" : ""),
(flags & WLAN_STA_WNM_SLEEP_MODE ?
"[WNM_SLEEP_MODE]" : ""));
if (os_snprintf_error(buflen, res))
res = -1;
return res;
}
static void ap_sta_delayed_1x_auth_fail_cb(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
u16 reason;
wpa_dbg(hapd->msg_ctx, MSG_DEBUG,
"IEEE 802.1X: Scheduled disconnection of " MACSTR
" after EAP-Failure", MAC2STR(sta->addr));
reason = sta->disconnect_reason_code;
if (!reason)
reason = WLAN_REASON_IEEE_802_1X_AUTH_FAILED;
ap_sta_disconnect(hapd, sta, sta->addr, reason);
if (sta->flags & WLAN_STA_WPS)
hostapd_wps_eap_completed(hapd);
}
void ap_sta_delayed_1x_auth_fail_disconnect(struct hostapd_data *hapd,
struct sta_info *sta)
{
wpa_dbg(hapd->msg_ctx, MSG_DEBUG,
"IEEE 802.1X: Force disconnection of " MACSTR
" after EAP-Failure in 10 ms", MAC2STR(sta->addr));
/*
* Add a small sleep to increase likelihood of previously requested
* EAP-Failure TX getting out before this should the driver reorder
* operations.
*/
eloop_cancel_timeout(ap_sta_delayed_1x_auth_fail_cb, hapd, sta);
eloop_register_timeout(0, 10000, ap_sta_delayed_1x_auth_fail_cb,
hapd, sta);
}
int ap_sta_pending_delayed_1x_auth_fail_disconnect(struct hostapd_data *hapd,
struct sta_info *sta)
{
return eloop_is_timeout_registered(ap_sta_delayed_1x_auth_fail_cb,
hapd, sta);
}
int ap_sta_re_add(struct hostapd_data *hapd, struct sta_info *sta)
{
/*
* If a station that is already associated to the AP, is trying to
* authenticate again, remove the STA entry, in order to make sure the
* STA PS state gets cleared and configuration gets updated. To handle
* this, station's added_unassoc flag is cleared once the station has
* completed association.
*/
ap_sta_set_authorized(hapd, sta, 0);
hostapd_drv_sta_remove(hapd, sta->addr);
sta->flags &= ~(WLAN_STA_ASSOC | WLAN_STA_AUTH | WLAN_STA_AUTHORIZED);
if (hostapd_sta_add(hapd, sta->addr, 0, 0,
sta->supported_rates,
sta->supported_rates_len,
0, NULL, NULL, NULL, 0, NULL,
sta->flags, 0, 0, 0, 0)) {
hostapd_logger(hapd, sta->addr,
HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_NOTICE,
"Could not add STA to kernel driver");
return -1;
}
sta->added_unassoc = 1;
return 0;
}