hostap/tests/hwsim/test_ap_acs.py

576 lines
21 KiB
Python
Raw Normal View History

# Test cases for automatic channel selection with hostapd
# Copyright (c) 2013-2018, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import logging
logger = logging.getLogger()
import time
import hostapd
from utils import *
from test_dfs import wait_dfs_event
def force_prev_ap_on_24g(ap):
# For now, make sure the last operating channel was on 2.4 GHz band to get
# sufficient survey data from mac80211_hwsim.
hostapd.add_ap(ap, {"ssid": "open"})
time.sleep(0.1)
hostapd.remove_bss(ap)
def force_prev_ap_on_5g(ap):
# For now, make sure the last operating channel was on 5 GHz band to get
# sufficient survey data from mac80211_hwsim.
hostapd.add_ap(ap, {"ssid": "open", "hw_mode": "a",
"channel": "36", "country_code": "US"})
time.sleep(0.1)
hostapd.remove_bss(ap)
def wait_acs(hapd, return_after_acs=False):
ev = hapd.wait_event(["ACS-STARTED", "ACS-COMPLETED", "ACS-FAILED",
"AP-ENABLED", "AP-DISABLED"], timeout=5)
if not ev:
raise Exception("ACS start timed out")
if "ACS-STARTED" not in ev:
raise Exception("Unexpected ACS event: " + ev)
state = hapd.get_status_field("state")
if state != "ACS":
raise Exception("Unexpected interface state")
ev = hapd.wait_event(["ACS-COMPLETED", "ACS-FAILED", "AP-ENABLED",
"AP-DISABLED"], timeout=20)
if not ev:
raise Exception("ACS timed out")
if "ACS-COMPLETED" not in ev:
raise Exception("Unexpected ACS event: " + ev)
if return_after_acs:
return
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out")
if "AP-ENABLED" not in ev:
raise Exception("Unexpected ACS event: " + ev)
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state")
def test_ap_acs(dev, apdev):
"""Automatic channel selection"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_chanlist(dev, apdev):
"""Automatic channel selection with chanlist set"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['chanlist'] = '1 6 11'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_freqlist(dev, apdev):
"""Automatic channel selection with freqlist set"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['freqlist'] = '2412 2437 2462'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = int(hapd.get_status_field("freq"))
if freq not in [2412, 2437, 2462]:
raise Exception("Unexpected frequency: " + freq)
dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq))
def test_ap_acs_invalid_chanlist(dev, apdev):
"""Automatic channel selection with invalid chanlist"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['chanlist'] = '15-18'
hapd = hostapd.add_ap(apdev[0], params, no_enable=True)
res = hapd.request("ENABLE")
if "OK" in res:
raise Exception("ENABLE command succeeded unexpectedly")
def test_ap_multi_bss_acs(dev, apdev):
"""hostapd start with a multi-BSS configuration file using ACS"""
skip_with_fips(dev[0])
check_sae_capab(dev[2])
force_prev_ap_on_24g(apdev[0])
# start the actual test
hapd = hostapd.add_iface(apdev[0], 'multi-bss-acs.conf')
hapd.enable()
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("bss-1", key_mgmt="NONE", scan_freq=freq)
dev[1].connect("bss-2", psk="12345678", scan_freq=freq)
dev[2].set("sae_groups", "")
dev[2].connect("bss-3", key_mgmt="SAE", psk="qwertyuiop", scan_freq=freq)
def test_ap_acs_40mhz(dev, apdev):
"""Automatic channel selection for 40 MHz channel"""
run_ap_acs_40mhz(dev, apdev, '[HT40+]')
def test_ap_acs_40mhz_plus_or_minus(dev, apdev):
"""Automatic channel selection for 40 MHz channel (plus or minus)"""
run_ap_acs_40mhz(dev, apdev, '[HT40+][HT40-]')
def run_ap_acs_40mhz(dev, apdev, ht_capab):
clear_scan_cache(apdev[0])
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['ht_capab'] = ht_capab
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
sec = hapd.get_status_field("secondary_channel")
if int(sec) == 0:
raise Exception("Secondary channel not set")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_40mhz_minus(dev, apdev):
"""Automatic channel selection for HT40- channel"""
clear_scan_cache(apdev[0])
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['ht_capab'] = '[HT40-]'
params['acs_num_scans'] = '1'
params['chanlist'] = '1 11'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
# HT40- is not currently supported in hostapd ACS, so do not try to connect
# or verify that this operation succeeded.
def test_ap_acs_5ghz(dev, apdev):
"""Automatic channel selection on 5 GHz"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['country_code'] = 'US'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_5ghz_40mhz(dev, apdev):
"""Automatic channel selection on 5 GHz for 40 MHz channel"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
sec = hapd.get_status_field("secondary_channel")
if int(sec) == 0:
raise Exception("Secondary channel not set")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_vht(dev, apdev):
"""Automatic channel selection for VHT"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
params['ieee80211ac'] = '1'
params['vht_oper_chwidth'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
sec = hapd.get_status_field("secondary_channel")
if int(sec) == 0:
raise Exception("Secondary channel not set")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_vht40(dev, apdev):
"""Automatic channel selection for VHT40"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
params['ieee80211ac'] = '1'
params['vht_oper_chwidth'] = '0'
params['acs_num_scans'] = '1'
params['chanlist'] = '36 149'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
sec = hapd.get_status_field("secondary_channel")
if int(sec) == 0:
raise Exception("Secondary channel not set")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_vht160(dev, apdev):
"""Automatic channel selection for VHT160"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'ZA'
params['ieee80211ac'] = '1'
params['vht_oper_chwidth'] = '2'
params['ieee80211d'] = '1'
params['ieee80211h'] = '1'
params['chanlist'] = '100'
params['acs_num_scans'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
# VHT160 is not currently supported in hostapd ACS, so do not try to
# enforce successful AP start.
if "AP-ENABLED" in ev:
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_vht160_scan_disable(dev, apdev):
"""Automatic channel selection for VHT160 and DISABLE during scan"""
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'ZA'
params['ieee80211ac'] = '1'
params['vht_oper_chwidth'] = '2'
params["vht_oper_centr_freq_seg0_idx"] = "114"
params['ieee80211d'] = '1'
params['ieee80211h'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
time.sleep(3)
clear_regdom(hapd, dev)
def test_ap_acs_bias(dev, apdev):
"""Automatic channel selection with bias values"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['acs_chan_bias'] = '1:0.8 3:1.2 6:0.7 11:0.8'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_survey(dev, apdev):
"""Automatic channel selection using acs_survey parameter"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = 'acs_survey'
params['acs_num_scans'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_errors(dev, apdev):
"""Automatic channel selection failures"""
clear_scan_cache(apdev[0])
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['acs_num_scans'] = '2'
params['chanlist'] = '1'
hapd = hostapd.add_ap(apdev[0], params, no_enable=True)
with alloc_fail(hapd, 1, "acs_request_scan"):
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Unexpected success for ENABLE")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_request_scan"):
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Unexpected success for ENABLE")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_scan_complete"):
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_request_scan;acs_scan_complete"):
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
@long_duration_test
def test_ap_acs_dfs(dev, apdev):
"""Automatic channel selection, HT scan, and DFS"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
params['ieee80211d'] = '1'
params['ieee80211h'] = '1'
params['acs_num_scans'] = '1'
params['chanlist'] = '52 56 60 64'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd, return_after_acs=True)
wait_dfs_event(hapd, "DFS-CAC-START", 5)
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
if "success=1" not in ev:
raise Exception("CAC failed")
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out")
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state")
freq = int(hapd.get_status_field("freq"))
if freq not in [5260, 5280, 5300, 5320]:
raise Exception("Unexpected frequency: %d" % freq)
dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq))
dev[0].wait_regdom(country_ie=True)
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
def test_ap_acs_exclude_dfs(dev, apdev, params):
"""Automatic channel selection, exclude DFS"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
params['ieee80211d'] = '1'
params['ieee80211h'] = '1'
params['acs_num_scans'] = '1'
params['acs_exclude_dfs'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state")
freq = int(hapd.get_status_field("freq"))
if freq in [5260, 5280, 5300, 5320,
5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680]:
raise Exception("Unexpected frequency: %d" % freq)
dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq))
dev[0].wait_regdom(country_ie=True)
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
@long_duration_test
def test_ap_acs_vht160_dfs(dev, apdev):
"""Automatic channel selection 160 MHz, HT scan, and DFS"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'a'
params['channel'] = '0'
params['ht_capab'] = '[HT40+]'
params['country_code'] = 'US'
params['ieee80211ac'] = '1'
params['vht_oper_chwidth'] = '2'
params['ieee80211d'] = '1'
params['ieee80211h'] = '1'
params['acs_num_scans'] = '1'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd, return_after_acs=True)
wait_dfs_event(hapd, "DFS-CAC-START", 5)
ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70)
if "success=1" not in ev:
raise Exception("CAC failed")
ev = hapd.wait_event(["AP-ENABLED"], timeout=5)
if not ev:
raise Exception("AP setup timed out")
state = hapd.get_status_field("state")
if state != "ENABLED":
raise Exception("Unexpected interface state")
freq = int(hapd.get_status_field("freq"))
if freq not in [5180, 5500]:
raise Exception("Unexpected frequency: %d" % freq)
dev[0].connect("test-acs", psk="12345678", scan_freq=str(freq))
dev[0].wait_regdom(country_ie=True)
finally:
if hapd:
hapd.request("DISABLE")
dev[0].disconnect_and_stop_scan()
hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00'])
dev[0].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=0.5)
dev[0].flush_scan_cache()
def test_ap_acs_hw_mode_any(dev, apdev):
"""Automatic channel selection with hw_mode=any"""
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['hw_mode'] = 'any'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
def test_ap_acs_hw_mode_any_5ghz(dev, apdev):
"""Automatic channel selection with hw_mode=any and 5 GHz"""
try:
hapd = None
force_prev_ap_on_5g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['hw_mode'] = 'any'
params['channel'] = '0'
params['country_code'] = 'US'
params['acs_chan_bias'] = '36:0.7 40:0.7 44:0.7 48:0.7'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 5000:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
dev[0].wait_regdom(country_ie=True)
finally:
clear_regdom(hapd, dev)
def test_ap_acs_with_fallback_to_20(dev, apdev):
"""Automatic channel selection with fallback to 20 MHz"""
force_prev_ap_on_24g(apdev[0])
params = {"ssid": "legacy-20",
"channel": "7", "ieee80211n": "0"}
hostapd.add_ap(apdev[1], params)
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['acs_chan_bias'] = '6:0.1'
params['ht_capab'] = '[HT40+]'
hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False)
wait_acs(hapd)
freq = hapd.get_status_field("freq")
if int(freq) < 2400:
raise Exception("Unexpected frequency")
dev[0].connect("test-acs", psk="12345678", scan_freq=freq)
sig = dev[0].request("SIGNAL_POLL").splitlines()
logger.info("SIGNAL_POLL: " + str(sig))
if "WIDTH=20 MHz" not in sig:
raise Exception("Station did not report 20 MHz bandwidth")