Projet_SETI_RISC-V/riscv-gnu-toolchain/binutils/gold/Makefile.in
2023-03-06 14:48:14 +01:00

1682 lines
61 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright (C) 2006-2022 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = dwp$(EXEEXT)
noinst_PROGRAMS = ld-new$(EXEEXT) incremental-dump$(EXEEXT)
@GCC_TRUE@@NATIVE_LINKER_TRUE@check_PROGRAMS = ld1$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ ld2$(EXEEXT) ld1-r$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ ld2-r$(EXEEXT) ld4$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__EXEEXT_1)
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_1 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_2 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_3 = -Wl,--thread-count=13
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_4 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_5 = ld3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_6 = bootstrap-test-treehash-chunksize
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_7 = bootstrap-test-treehash-chunksize
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/ax_pthread.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
$(top_srcdir)/../config/po.m4 \
$(top_srcdir)/../config/progtest.m4 \
$(top_srcdir)/../config/zlib.m4 \
$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = po/Makefile.in
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
AR = ar
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo " AR " $@;
am__v_AR_1 =
libgold_a_AR = $(AR) $(ARFLAGS)
libgold_a_DEPENDENCIES = $(LIBOBJS)
am__objects_1 = archive.$(OBJEXT) attributes.$(OBJEXT) \
binary.$(OBJEXT) common.$(OBJEXT) compressed_output.$(OBJEXT) \
copy-relocs.$(OBJEXT) cref.$(OBJEXT) defstd.$(OBJEXT) \
descriptors.$(OBJEXT) dirsearch.$(OBJEXT) dynobj.$(OBJEXT) \
dwarf_reader.$(OBJEXT) ehframe.$(OBJEXT) errors.$(OBJEXT) \
expression.$(OBJEXT) fileread.$(OBJEXT) gc.$(OBJEXT) \
gdb-index.$(OBJEXT) gold.$(OBJEXT) gold-threads.$(OBJEXT) \
icf.$(OBJEXT) incremental.$(OBJEXT) int_encoding.$(OBJEXT) \
layout.$(OBJEXT) mapfile.$(OBJEXT) merge.$(OBJEXT) \
nacl.$(OBJEXT) object.$(OBJEXT) options.$(OBJEXT) \
output.$(OBJEXT) parameters.$(OBJEXT) plugin.$(OBJEXT) \
readsyms.$(OBJEXT) reduced_debug_output.$(OBJEXT) \
reloc.$(OBJEXT) resolve.$(OBJEXT) script-sections.$(OBJEXT) \
script.$(OBJEXT) stringpool.$(OBJEXT) symtab.$(OBJEXT) \
target.$(OBJEXT) target-select.$(OBJEXT) timer.$(OBJEXT) \
version.$(OBJEXT) workqueue.$(OBJEXT) \
workqueue-threads.$(OBJEXT)
am__objects_2 =
am__objects_3 = yyscript.$(OBJEXT)
am_libgold_a_OBJECTS = $(am__objects_1) $(am__objects_2) \
$(am__objects_3) $(am__objects_2)
libgold_a_OBJECTS = $(am_libgold_a_OBJECTS)
am__installdirs = "$(DESTDIR)$(bindir)"
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__EXEEXT_1 = \
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@ ld3$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am_dwp_OBJECTS = dwp.$(OBJEXT)
dwp_OBJECTS = $(am_dwp_OBJECTS)
am__DEPENDENCIES_1 =
dwp_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(dwp_LDFLAGS) \
$(LDFLAGS) -o $@
am_incremental_dump_OBJECTS = incremental-dump.$(OBJEXT)
incremental_dump_OBJECTS = $(am_incremental_dump_OBJECTS)
am__objects_4 = main.$(OBJEXT)
am_ld_new_OBJECTS = $(am__objects_4)
ld_new_OBJECTS = $(am_ld_new_OBJECTS)
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) libgold.a $(LIBIBERTY) \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
$(am__DEPENDENCIES_1)
ld_new_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld_new_LDFLAGS) \
$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_OBJECTS = $(am__objects_4)
ld1_OBJECTS = $(am_ld1_OBJECTS)
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_r_OBJECTS = $(am__objects_4)
ld1_r_OBJECTS = $(am_ld1_r_OBJECTS)
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld2_OBJECTS = $(am__objects_4)
ld2_OBJECTS = $(am_ld2_OBJECTS)
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld2_r_OBJECTS = $(am__objects_4)
ld2_r_OBJECTS = $(am_ld2_r_OBJECTS)
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld3_OBJECTS = $(am__objects_4)
ld3_OBJECTS = $(am_ld3_OBJECTS)
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld4_OBJECTS = $(am__objects_4)
ld4_OBJECTS = $(am_ld4_OBJECTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
AM_V_CXX = $(am__v_CXX_@AM_V@)
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
am__v_CXX_0 = @echo " CXX " $@;
am__v_CXX_1 =
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
-o $@
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
am__v_CXXLD_0 = @echo " CXXLD " $@;
am__v_CXXLD_1 =
@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
-e s/c++$$/h++/ -e s/c$$/h/
YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
AM_V_YACC = $(am__v_YACC_@AM_V@)
am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
am__v_YACC_0 = @echo " YACC " $@;
am__v_YACC_1 =
YLWRAP = $(top_srcdir)/../ylwrap
SOURCES = $(libgold_a_SOURCES) $(dwp_SOURCES) \
$(incremental_dump_SOURCES) $(ld_new_SOURCES) \
$(EXTRA_ld_new_SOURCES) $(ld1_SOURCES) $(ld1_r_SOURCES) \
$(ld2_SOURCES) $(ld2_r_SOURCES) $(ld3_SOURCES) $(ld4_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope check recheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = { \
$(am__tty_colors_dummy); \
if test "X$(AM_COLOR_TESTS)" = Xno; then \
am__color_tests=no; \
elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
am__color_tests=yes; \
elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
am__color_tests=yes; \
fi; \
if test $$am__color_tests = yes; then \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__recheck_rx = ^[ ]*:recheck:[ ]*
am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
recheck = 1; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
{ \
if ((getline line2 < ($$0 ".log")) < 0) \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
{ \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
{ \
break; \
} \
}; \
if (recheck) \
print $$0; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
print "fatal: making $@: " msg | "cat >&2"; \
exit 1; \
} \
function rst_section(header) \
{ \
print header; \
len = length(header); \
for (i = 1; i <= len; i = i + 1) \
printf "="; \
printf "\n\n"; \
} \
{ \
copy_in_global_log = 1; \
global_test_result = "RUN"; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".trs"); \
if (line ~ /$(am__global_test_result_rx)/) \
{ \
sub("$(am__global_test_result_rx)", "", line); \
sub("[ ]*$$", "", line); \
global_test_result = line; \
} \
else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
copy_in_global_log = 0; \
}; \
if (copy_in_global_log) \
{ \
rst_section(global_test_result ": " $$0); \
while ((rc = (getline line < ($$0 ".log"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".log"); \
print line; \
}; \
printf "\n"; \
}; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
case "$@" in \
*/*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
*) am__odir=.;; \
esac; \
test "x$$am__odir" = x"." || test -d "$$am__odir" \
|| $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
am__expect_failure=yes;; \
*) \
am__expect_failure=no;; \
esac; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed). The result is saved in the shell variable
# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFAULT_TARGET = @DEFAULT_TARGET@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLOPEN_LIBS = @DLOPEN_LIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GOLD_LDADD = @GOLD_LDADD@
GOLD_LDFLAGS = @GOLD_LDFLAGS@
GREP = @GREP@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LDFLAGS = @LDFLAGS@
LFS_CFLAGS = @LFS_CFLAGS@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MERGE_CONSTANTS_FLAG = @MERGE_CONSTANTS_FLAG@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NO_WERROR = @NO_WERROR@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANDOM_SEED_CFLAGS = @RANDOM_SEED_CFLAGS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TARGETOBJS = @TARGETOBJS@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
WARN_CXXFLAGS = @WARN_CXXFLAGS@
WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_as_default = @install_as_default@
install_sh = @install_sh@
installed_linker = @installed_linker@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = po testsuite
tooldir = $(exec_prefix)/$(target_alias)
ACLOCAL_AMFLAGS = -I ../bfd -I ../config
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
THREADFLAGS = @PTHREAD_CFLAGS@
THREADLIBS = @PTHREAD_LIBS@
AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_LDFLAGS = $(THREADFLAGS)
AM_CPPFLAGS = \
-I$(srcdir) -I$(srcdir)/../include -I$(srcdir)/../elfcpp \
-DLOCALEDIR="\"$(datadir)/locale\"" \
-DBINDIR="\"$(bindir)\"" -DTOOLBINDIR="\"$(tooldir)/bin\"" \
-DTOOLLIBDIR="\"$(tooldir)/lib\"" @INCINTL@
LIBIBERTY = ../libiberty/libiberty.a
@PLUGINS_TRUE@LIBDL = @DLOPEN_LIBS@
AM_YFLAGS = -d
# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled. Avoid this.
am__skiplex =
am__skipyacc =
noinst_LIBRARIES = libgold.a
CCFILES = \
archive.cc \
attributes.cc \
binary.cc \
common.cc \
compressed_output.cc \
copy-relocs.cc \
cref.cc \
defstd.cc \
descriptors.cc \
dirsearch.cc \
dynobj.cc \
dwarf_reader.cc \
ehframe.cc \
errors.cc \
expression.cc \
fileread.cc \
gc.cc \
gdb-index.cc \
gold.cc \
gold-threads.cc \
icf.cc \
incremental.cc \
int_encoding.cc \
layout.cc \
mapfile.cc \
merge.cc \
nacl.cc \
object.cc \
options.cc \
output.cc \
parameters.cc \
plugin.cc \
readsyms.cc \
reduced_debug_output.cc \
reloc.cc \
resolve.cc \
script-sections.cc \
script.cc \
stringpool.cc \
symtab.cc \
target.cc \
target-select.cc \
timer.cc \
version.cc \
workqueue.cc \
workqueue-threads.cc
HFILES = \
arm-reloc-property.h \
aarch64-reloc-property.h \
archive.h \
attributes.h \
binary.h \
common.h \
compressed_output.h \
copy-relocs.h \
cref.h \
defstd.h \
dirsearch.h \
descriptors.h \
dynobj.h \
dwarf_reader.h \
ehframe.h \
errors.h \
fileread.h \
freebsd.h \
gc.h \
gdb-index.h \
gold.h \
gold-threads.h \
icf.h \
int_encoding.h \
layout.h \
mapfile.h \
merge.h \
nacl.h \
object.h \
options.h \
output.h \
parameters.h \
plugin.h \
readsyms.h \
reduced_debug_output.h \
reloc.h \
reloc-types.h \
script-c.h \
script-sections.h \
script.h \
stringpool.h \
symtab.h \
target.h \
target-reloc.h \
target-select.h \
timer.h \
tls.h \
token.h \
workqueue.h \
workqueue-internal.h
YFILES = \
yyscript.y
DEFFILES = arm-reloc.def aarch64-reloc.def
EXTRA_DIST = yyscript.c yyscript.h
TARGETSOURCES = \
i386.cc x86_64.cc sparc.cc powerpc.cc arm.cc arm-reloc-property.cc tilegx.cc \
mips.cc aarch64.cc aarch64-reloc-property.cc s390.cc
ALL_TARGETOBJS = \
i386.$(OBJEXT) x86_64.$(OBJEXT) sparc.$(OBJEXT) powerpc.$(OBJEXT) \
arm.$(OBJEXT) arm-reloc-property.$(OBJEXT) tilegx.$(OBJEXT) \
mips.$(OBJEXT) aarch64.$(OBJEXT) aarch64-reloc-property.$(OBJEXT) \
s390.$(OBJEXT)
libgold_a_SOURCES = $(CCFILES) $(HFILES) $(YFILES) $(DEFFILES)
libgold_a_LIBADD = $(LIBOBJS)
sources_var = main.cc
deps_var = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(LIBINTL_DEP)
ldadd_var = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(GOLD_LDADD) $(LIBINTL) \
$(THREADLIBS) $(LIBDL) $(ZLIB)
ldflags_var = $(GOLD_LDFLAGS)
ld_new_SOURCES = $(sources_var)
ld_new_DEPENDENCIES = $(deps_var)
ld_new_LDADD = $(ldadd_var)
ld_new_LDFLAGS = $(ldflags_var)
EXTRA_ld_new_SOURCES = $(TARGETSOURCES)
incremental_dump_SOURCES = incremental-dump.cc
incremental_dump_DEPENDENCIES = $(TARGETOBJS) libgold.a $(LIBIBERTY) \
$(LIBINTL_DEP)
incremental_dump_LDADD = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(LIBINTL) \
$(THREADLIBS) $(LIBDL) $(ZLIB)
dwp_SOURCES = dwp.cc
dwp_DEPENDENCIES = libgold.a $(LIBIBERTY) $(LIBINTL_DEP)
dwp_LDADD = libgold.a $(LIBIBERTY) $(GOLD_LDADD) $(LIBINTL) $(THREADLIBS) \
$(LIBDL) $(ZLIB)
dwp_LDFLAGS = $(GOLD_LDFLAGS)
CONFIG_STATUS_DEPENDENCIES = $(srcdir)/../bfd/development.sh
POTFILES = $(CCFILES) $(HFILES) $(TARGETSOURCES)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_DEPENDENCIES = $(deps_var) gcctestdir1/ld gcctestdir1/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@editcc1 = -e 's/\([^ ]*\)\(.*\)/\1 -Bgcctestdir1\/\2/'
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LINK = `echo $(CXXLD) | sed $(editcc1)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(ld1_LDFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_DEPENDENCIES = $(deps_var) gcctestdir2/ld gcctestdir2/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@editcc2 = -e 's/\([^ ]*\)\(.*\)/\1 -Bgcctestdir2\/\2/'
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LINK = `echo $(CXXLD) | sed $(editcc2)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(ld2_LDFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@TEST_READELF = $(top_builddir)/../binutils/readelf
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_DEPENDENCIES = libgold-1-r.o $(deps_var) gcctestdir1/ld gcctestdir1/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_LDADD = libgold-1-r.o $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_LINK = `echo $(CXXLD) | sed $(editcc1)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_DEPENDENCIES = libgold-2-r.o $(deps_var) gcctestdir2-r/ld gcctestdir2-r/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_LDADD = libgold-2-r.o $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@editcc2r = -e 's/\([^ ]*\)\(.*\)/\1 -Bgcctestdir2-r\/\2/'
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_LINK = `echo $(CXXLD) | sed $(editcc2r)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@TESTS = bootstrap-test bootstrap-test-r \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ bootstrap-test-treehash-chunksize \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_6)
@GCC_TRUE@@NATIVE_LINKER_TRUE@MOSTLYCLEANFILES = bootstrap-test \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ bootstrap-test-r \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ bootstrap-test-treehash-chunksize \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_7)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_DEPENDENCIES = $(deps_var) gcctestdir3/ld gcctestdir3/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@editcc3 = -e 's/\([^ ]*\)\(.*\)/\1 -Bgcctestdir3\/\2/'
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_LINK = `echo $(CXXLD) | sed $(editcc3)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(ld3_LDFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_DEPENDENCIES = $(deps_var) gcctestdir4/ld gcctestdir4/collect-ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@editcc4 = -e 's/\([^ ]*\)\(.*\)/\1 -Bgcctestdir4\/\2/'
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_LINK = `echo $(CXXLD) | sed $(editcc4)`\
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(AM_CXXFLAGS) $(CXXFLAGS) $(ld4_LDFLAGS) $(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDFLAGS = -Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_1)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDFLAGS = -Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_2)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_LDFLAGS = -Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_3)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_LDFLAGS = -Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-chunk-size-for-treehash=12346 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ -Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(am__append_4)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .cc .log .o .obj .test .test$(EXEEXT) .trs .y
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
cd $(top_builddir) && $(SHELL) ./config.status $@
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
yyscript.h: yyscript.c
@if test ! -f $@; then rm -f yyscript.c; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) yyscript.c; else :; fi
libgold.a: $(libgold_a_OBJECTS) $(libgold_a_DEPENDENCIES) $(EXTRA_libgold_a_DEPENDENCIES)
$(AM_V_at)-rm -f libgold.a
$(AM_V_AR)$(libgold_a_AR) libgold.a $(libgold_a_OBJECTS) $(libgold_a_LIBADD)
$(AM_V_at)$(RANLIB) libgold.a
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
clean-checkPROGRAMS:
-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
clean-noinstPROGRAMS:
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
dwp$(EXEEXT): $(dwp_OBJECTS) $(dwp_DEPENDENCIES) $(EXTRA_dwp_DEPENDENCIES)
@rm -f dwp$(EXEEXT)
$(AM_V_CXXLD)$(dwp_LINK) $(dwp_OBJECTS) $(dwp_LDADD) $(LIBS)
incremental-dump$(EXEEXT): $(incremental_dump_OBJECTS) $(incremental_dump_DEPENDENCIES) $(EXTRA_incremental_dump_DEPENDENCIES)
@rm -f incremental-dump$(EXEEXT)
$(AM_V_CXXLD)$(CXXLINK) $(incremental_dump_OBJECTS) $(incremental_dump_LDADD) $(LIBS)
ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES) $(EXTRA_ld_new_DEPENDENCIES)
@rm -f ld-new$(EXEEXT)
$(AM_V_CXXLD)$(ld_new_LINK) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)
ld1$(EXEEXT): $(ld1_OBJECTS) $(ld1_DEPENDENCIES) $(EXTRA_ld1_DEPENDENCIES)
@rm -f ld1$(EXEEXT)
$(AM_V_GEN)$(ld1_LINK) $(ld1_OBJECTS) $(ld1_LDADD) $(LIBS)
ld1-r$(EXEEXT): $(ld1_r_OBJECTS) $(ld1_r_DEPENDENCIES) $(EXTRA_ld1_r_DEPENDENCIES)
@rm -f ld1-r$(EXEEXT)
$(AM_V_GEN)$(ld1_r_LINK) $(ld1_r_OBJECTS) $(ld1_r_LDADD) $(LIBS)
ld2$(EXEEXT): $(ld2_OBJECTS) $(ld2_DEPENDENCIES) $(EXTRA_ld2_DEPENDENCIES)
@rm -f ld2$(EXEEXT)
$(AM_V_GEN)$(ld2_LINK) $(ld2_OBJECTS) $(ld2_LDADD) $(LIBS)
ld2-r$(EXEEXT): $(ld2_r_OBJECTS) $(ld2_r_DEPENDENCIES) $(EXTRA_ld2_r_DEPENDENCIES)
@rm -f ld2-r$(EXEEXT)
$(AM_V_GEN)$(ld2_r_LINK) $(ld2_r_OBJECTS) $(ld2_r_LDADD) $(LIBS)
ld3$(EXEEXT): $(ld3_OBJECTS) $(ld3_DEPENDENCIES) $(EXTRA_ld3_DEPENDENCIES)
@rm -f ld3$(EXEEXT)
$(AM_V_GEN)$(ld3_LINK) $(ld3_OBJECTS) $(ld3_LDADD) $(LIBS)
ld4$(EXEEXT): $(ld4_OBJECTS) $(ld4_DEPENDENCIES) $(EXTRA_ld4_DEPENDENCIES)
@rm -f ld4$(EXEEXT)
$(AM_V_GEN)$(ld4_LINK) $(ld4_OBJECTS) $(ld4_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ffsll.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ftruncate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mremap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aarch64-reloc-property.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aarch64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/archive.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arm-reloc-property.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/attributes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binary.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compressed_output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/copy-relocs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cref.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/defstd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/descriptors.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirsearch.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dwarf_reader.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dwp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynobj.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ehframe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/errors.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expression.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb-index.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold-threads.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/icf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/incremental-dump.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/incremental.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/int_encoding.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/layout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mapfile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/merge.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mips.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nacl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/object.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parameters.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plugin.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/powerpc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readsyms.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reduced_debug_output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reloc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/resolve.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s390.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script-sections.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sparc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringpool.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symtab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/target-select.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/target.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tilegx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workqueue-threads.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workqueue.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yyscript.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.cc.o:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
.cc.obj:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.y.c:
$(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
rm -f $< $@
$(MAKE) $(AM_MAKEFLAGS) $<
# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__set_TESTS_bases); \
am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
redo_bases=`for i in $$bases; do \
am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
done`; \
if test -n "$$redo_bases"; then \
redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
test -f $$i.log && test -r $$i.log \
|| { echo "$$errmsg $$i.log" >&2; st=1; }; \
done; \
test $$st -eq 0 || exit 1; \
fi
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for b in $$bases; do echo $$b; done \
| $(am__create_global_log); \
} >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
check-TESTS:
@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
log_list=`for i in $$bases; do echo $$i.log; done`; \
trs_list=`for i in $$bases; do echo $$i.trs; done`; \
log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
exit $$?;
recheck: all $(check_PROGRAMS)
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
bases=`for i in $$bases; do echo $$i; done \
| $(am__list_recheck_tests)` || exit 1; \
log_list=`for i in $$bases; do echo $$i.log; done`; \
log_list=`echo $$log_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
bootstrap-test.log: bootstrap-test
@p='bootstrap-test'; \
b='bootstrap-test'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
bootstrap-test-r.log: bootstrap-test-r
@p='bootstrap-test-r'; \
b='bootstrap-test-r'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
bootstrap-test-treehash-chunksize.log: bootstrap-test-treehash-chunksize
@p='bootstrap-test-treehash-chunksize'; \
b='bootstrap-test-treehash-chunksize'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(LIBRARIES) $(PROGRAMS) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-rm -f yyscript.c
-rm -f yyscript.h
clean: clean-recursive
clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
clean-noinstLIBRARIES clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(DEPDIR) ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-binPROGRAMS install-exec-local
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf $(DEPDIR) ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binPROGRAMS
.MAKE: $(am__recursive_targets) all check-am install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-TESTS check-am clean clean-binPROGRAMS \
clean-checkPROGRAMS clean-cscope clean-generic \
clean-noinstLIBRARIES clean-noinstPROGRAMS cscope \
cscopelist-am ctags ctags-am distclean distclean-compile \
distclean-generic distclean-hdr distclean-tags dvi dvi-am html \
html-am info info-am install install-am install-binPROGRAMS \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-exec-local install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am recheck tags tags-am uninstall uninstall-am \
uninstall-binPROGRAMS
.PRECIOUS: Makefile
diststuff: $(EXTRA_DIST)
# Use an explicit dependency for the bison generated header file.
expression.$(OBJEXT): yyscript.h
script-sections.$(OBJEXT): yyscript.h
script.$(OBJEXT): yyscript.h
# We have to build libgold.a before we run the tests.
check: libgold.a
.PHONY: install-exec-local
install-exec-local: ld-new$(EXEEXT)
$(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(tooldir)/bin
n=`echo $(installed_linker) | sed '$(transform)'`; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) \
ld-new$(EXEEXT) $(DESTDIR)$(bindir)/$${n}$(EXEEXT); \
if test "$(bindir)" != "$(tooldir)/bin"; then \
rm -f $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT); \
ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT) >/dev/null 2>/dev/null \
|| $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT); \
fi; \
if test "x$(install_as_default)" = "xyes"; then \
ld=`echo ld | sed '$(transform)'`; \
rm -f $(DESTDIR)$(bindir)/$${ld}$(EXEEXT); \
ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(bindir)/$${ld}$(EXEEXT) >/dev/null 2>/dev/null \
|| $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(bindir)/$${ld}$(EXEEXT); \
if test "$(bindir)" != "$(tooldir)/bin"; then \
rm -f $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT) >/dev/null 2>/dev/null \
|| $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
fi; \
fi
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
# Bootstrap test support. We use ld-new to build ld1, then use ld1 to
# build ld2. ld1 and ld2 should be identical. ld-new need not be
# identical to ld1, since it was linked with the host linker.
@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir1/ld gcctestdir1/collect-ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@ test -d gcctestdir1 || mkdir -p gcctestdir1
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(LN_S) $(abs_top_builddir)/ld-new $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir2/ld gcctestdir2/collect-ld: ld1
@GCC_TRUE@@NATIVE_LINKER_TRUE@ test -d gcctestdir2 || mkdir -p gcctestdir2
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(LN_S) $(abs_top_builddir)/ld1 $@
# Skip this for LTO build due to different build IDs.
@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test: ld2
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ if $(TEST_READELF) -SW main.$(OBJEXT) | grep "gnu.lto" > /dev/null; then \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo true >> $@; \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ else \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "cmp ld1 ld2" >> $@; \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ fi
@GCC_TRUE@@NATIVE_LINKER_TRUE@ chmod +x $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@libgold-1-r.o: gcctestdir1/ld libgold.a
@GCC_TRUE@@NATIVE_LINKER_TRUE@ gcctestdir1/ld -o $@ -r --whole-archive libgold.a
@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir2-r/ld gcctestdir2-r/collect-ld: ld1-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@ test -d gcctestdir2-r || mkdir -p gcctestdir2-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(LN_S) $(abs_top_builddir)/ld1-r $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@libgold-2-r.o: gcctestdir2-r/ld libgold.a
@GCC_TRUE@@NATIVE_LINKER_TRUE@ gcctestdir2-r/ld -o $@ -r --whole-archive libgold.a
# Skip this for LTO build due to different build IDs.
@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test-r: ld2-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ if $(TEST_READELF) -SW main.$(OBJEXT) | grep "gnu.lto" > /dev/null; then \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo true >> $@; \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ else \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "cmp ld1-r ld2-r" >> $@; \
@GCC_TRUE@@NATIVE_LINKER_TRUE@ fi
@GCC_TRUE@@NATIVE_LINKER_TRUE@ chmod +x $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir3/ld gcctestdir3/collect-ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@ test -d gcctestdir3 || mkdir -p gcctestdir3
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(LN_S) $(abs_top_builddir)/ld-new $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir4/ld gcctestdir4/collect-ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@ test -d gcctestdir4 || mkdir -p gcctestdir4
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ $(LN_S) $(abs_top_builddir)/ld-new $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@bootstrap-test-treehash: ld1 ld3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@ echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@ echo "cmp ld1 ld3" >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@ chmod +x $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test-treehash-chunksize: ld1 ld4
@GCC_TRUE@@NATIVE_LINKER_TRUE@ rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ echo "cmp ld1 ld4 | grep ." >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@ chmod +x $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: