# Makefile.in generated by automake 1.11.6 from Makefile.am. # iconv/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. VPATH = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/iconv am__make_dryrun = \ { \ am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ *) \ for am__flg in $$MAKEFLAGS; do \ case $$am__flg in \ *=*|--*) ;; \ *n*) am__dry=yes; break;; \ esac; \ done;; \ esac; \ test $$am__dry = yes; \ } pkgdatadir = $(datadir)/newlib pkgincludedir = $(includedir)/newlib pkglibdir = $(libdir)/newlib pkglibexecdir = $(libexecdir)/newlib am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = riscv32-unknown-elf DIST_COMMON = $(srcdir)/../../Makefile.shared $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am subdir = iconv ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../../libtool.m4 \ $(top_srcdir)/../../ltoptions.m4 \ $(top_srcdir)/../../ltsugar.m4 \ $(top_srcdir)/../../ltversion.m4 \ $(top_srcdir)/../../lt~obsolete.m4 \ $(top_srcdir)/../acinclude.m4 $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = depcomp = am__depfiles_maybe = SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(cctdir)" DATA = $(cct_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) ACLOCAL = ${SHELL} /home/seti/riscv-gnu-toolchain/newlib/missing --run aclocal-1.11 AMTAR = $${TAR-tar} AR = riscv32-unknown-elf-ar AS = riscv32-unknown-elf-as AUTOCONF = ${SHELL} /home/seti/riscv-gnu-toolchain/newlib/missing --run autoconf AUTOHEADER = ${SHELL} /home/seti/riscv-gnu-toolchain/newlib/missing --run autoheader AUTOMAKE = ${SHELL} /home/seti/riscv-gnu-toolchain/newlib/missing --run automake-1.11 AWK = /usr/bin/gawk CC = riscv32-unknown-elf-gcc -B/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/ -isystem /home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/targ-include -isystem /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/include -B/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/libgloss/riscv32 -L/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/libgloss/libnosys -L/home/seti/riscv-gnu-toolchain/newlib/libgloss/riscv32 CCAS = riscv32-unknown-elf-gcc -B/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/ -isystem /home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/targ-include -isystem /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/include -B/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/libgloss/riscv32 -L/home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/libgloss/libnosys -L/home/seti/riscv-gnu-toolchain/newlib/libgloss/riscv32 CCASFLAGS = -O2 -D_POSIX_MODE -ffunction-sections -fdata-sections -mcmodel=medlow CCDEPMODE = depmode=gcc3 CFLAGS = -O2 -D_POSIX_MODE -ffunction-sections -fdata-sections -mcmodel=medlow CPP = CPPFLAGS = CRT0 = CYGPATH_W = echo DEFS = -DPACKAGE_NAME=\"newlib\" -DPACKAGE_TARNAME=\"newlib\" -DPACKAGE_VERSION=\"4.1.0\" -DPACKAGE_STRING=\"newlib\ 4.1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" DEPDIR = .deps DLLTOOL = riscv32-unknown-elf-dlltool DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = EXEEXT = FGREP = GREP = INSTALL = /usr/bin/install -c INSTALL_DATA = /usr/bin/install -c -m 644 INSTALL_PROGRAM = /usr/bin/install -c INSTALL_SCRIPT = /usr/bin/install -c INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = riscv32-unknown-elf-ld LDFLAGS = LIBC_EXTRA_DEF = LIBC_EXTRA_LIB = LIBC_MACHINE_LIB = machine/lib.a LIBC_POSIX_DEF = LIBC_POSIX_LIB = LIBC_SIGNAL_DEF = signal/stmp-def LIBC_SIGNAL_LIB = signal/lib.a LIBC_STDIO64_DEF = LIBC_STDIO64_LIB = LIBC_STDIO_DEF = stdio/stmp-def LIBC_STDIO_LIB = stdio/lib.a LIBC_SYSCALL_LIB = syscalls/lib.a LIBC_SYS_LIB = LIBC_UNIX_LIB = LIBC_XDR_DEF = LIBC_XDR_LIB = LIBOBJS = LIBS = LIBTOOL = LIPO = riscv32-unknown-elf-lipo LN_S = LTLIBOBJS = MAINT = # MAKEINFO = makeinfo --split-size=5000000 MKDIR_P = /usr/bin/mkdir -p NEWLIB_CFLAGS = -fno-builtin -DHAVE_NANOSLEEP NM = riscv32-unknown-elf-nm NMEDIT = NO_INCLUDE_LIST = rpc/types.h rpc/xdr.h OBJDUMP = riscv32-unknown-elf-objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = newlib PACKAGE_BUGREPORT = PACKAGE_NAME = newlib PACKAGE_STRING = newlib 4.1.0 PACKAGE_TARNAME = newlib PACKAGE_URL = PACKAGE_VERSION = 4.1.0 PATH_SEPARATOR = : RANLIB = riscv32-unknown-elf-ranlib READELF = riscv32-unknown-elf-readelf SED = /usr/bin/sed SET_MAKE = SHELL = /bin/bash STRIP = riscv32-unknown-elf-strip VERSION = 4.1.0 abs_builddir = /home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/libc/iconv abs_srcdir = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/iconv abs_top_builddir = /home/seti/riscv-gnu-toolchain/build-newlib/riscv32-unknown-elf/newlib/libc abs_top_srcdir = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc ac_ct_CC = ac_ct_DUMPBIN = aext = a am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = x86_64-pc-linux-gnu build_alias = x86_64-pc-linux-gnu build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} extra_dir = host = riscv32-unknown-elf host_alias = riscv32-unknown-elf host_cpu = riscv32 host_os = elf host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/seti/riscv-gnu-toolchain/newlib/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec libm_machine_dir = riscv localedir = ${datarootdir}/locale localstatedir = ${prefix}/var lpfx = lib_a- machine_dir = riscv mandir = ${datarootdir}/man mkdir_p = /usr/bin/mkdir -p newlib_basedir = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/.. oext = o oldincludedir = /usr/include pdfdir = ${docdir} prefix = /opt/riscv program_transform_name = s&^&riscv32-unknown-elf-& psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc/iconv subdirs = machine sys sys_dir = sysconfdir = ${prefix}/etc target_alias = riscv32-unknown-elf top_build_prefix = ../ top_builddir = .. top_srcdir = /home/seti/riscv-gnu-toolchain/newlib/newlib/libc AUTOMAKE_OPTIONS = cygnus SUBDIRS = ces ccs lib . cctdir = $(datadir)/iconv_data cct_DATA = encoding.aliases INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) SUBDEFS = lib/stmp-def # # documentation rules # SUFFIXES = .def .xml CHEW = ${top_builddir}/../doc/makedoc -f $(top_srcdir)/../doc/doc.str DOCBOOK_CHEW = ${top_srcdir}/../doc/makedocbook.py DOCBOOK_OUT_FILES = $(CHEWOUT_FILES:.def=.xml) DOCBOOK_CHAPTERS = $(CHAPTERS:.tex=.xml) CLEANFILES = $(CHEWOUT_FILES) $(DOCBOOK_OUT_FILES) CHEWOUT_FILES = iconv.def CHAPTERS = iconv.tex all: all-recursive .SUFFIXES: .SUFFIXES: .def .xml .c $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(srcdir)/../../Makefile.shared $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus iconv/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --cygnus iconv/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(srcdir)/../../Makefile.shared: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-cctDATA: $(cct_DATA) @$(NORMAL_INSTALL) @list='$(cct_DATA)'; test -n "$(cctdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(cctdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(cctdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cctdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(cctdir)" || exit $$?; \ done uninstall-cctDATA: @$(NORMAL_UNINSTALL) @list='$(cct_DATA)'; test -n "$(cctdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(cctdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-am: check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(cctdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-cctDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-cctDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags dvi dvi-am html html-am info \ info-am install install-am install-cctDATA install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-cctDATA objectlist.awk.in: $(noinst_LTLIBRARIES) -rm -f objectlist.awk.in for i in `ls *.lo` ; \ do \ echo $$i `pwd`/$$i >> objectlist.awk.in ; \ done .c.def: $(CHEW) < $< > $*.def || ( rm $*.def && false ) @touch stmp-def TARGETDOC ?= ../tmp.texi doc: $(CHEWOUT_FILES) for chapter in $(CHAPTERS) ; \ do \ cat $(srcdir)/$$chapter >> $(TARGETDOC) ; \ done .c.xml: $(DOCBOOK_CHEW) < $< > $*.xml || ( rm $*.xml && false ) @touch stmp-xml docbook: $(DOCBOOK_OUT_FILES) for chapter in $(DOCBOOK_CHAPTERS) ; \ do \ ${top_srcdir}/../doc/chapter-texi2docbook.py <$(srcdir)/$${chapter%.xml}.tex >../$$chapter ; \ done iconv.def: lib/iconv.def cp lib/iconv.def iconv.def iconv.xml: lib/iconv.xml cp lib/iconv.xml iconv.xml stmp-def: force (cd lib && $(MAKE) doc) touch $@ .PHONY: force force: $(SUBDEFS): stmp-def lib/iconv.def: $(SUBDEFS); @true lib/stmp-def: ; @true # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: