/*****************************************************************************
 *                                CACTI 7.0
 *                      SOFTWARE LICENSE AGREEMENT
 *            Copyright 2015 Hewlett-Packard Development Company, L.P.
 *                          All Rights Reserved
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.

 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.”
 *
 ***************************************************************************/



#include "nuca.h"
#include "Ucache.h"
#include <assert.h>

unsigned int MIN_BANKSIZE=65536;
#define FIXED_OVERHEAD 55e-12 /* clock skew and jitter in s. Ref: Hrishikesh et al ISCA 01 */
#define LATCH_DELAY 28e-12 /* latch delay in s (later should use FO4 TODO) */
#define CONTR_2_BANK_LAT 0

int cont_stats[2 /*l2 or l3*/][5/* cores */][ROUTER_TYPES][7 /*banks*/][8 /* cycle time */];

  Nuca::Nuca(
      /*TechnologyParameter::*/DeviceType *dt = &(g_tp.peri_global)
      ):deviceType(dt)
{
  init_cont();
}

void
Nuca::init_cont()
{
  FILE *cont;
  char line[5000];
  char jk[5000];
  cont = fopen("contention.dat", "r");
  if (!cont) {
    cout << "contention.dat file is missing!\n";
    exit(0);
  }

  for(int i=0; i<2; i++) {
    for(int j=2; j<5; j++) {
      for(int k=0; k<ROUTER_TYPES; k++) {
        for(int l=0;l<7; l++) {
          int *temp = cont_stats[i/*l2 or l3*/][j/*core*/][k/*64 or 128 or 256 link bw*/][l /* no banks*/];
          assert(fscanf(cont, "%[^\n]\n", line) != EOF);
          sscanf(line, "%[^:]: %d %d %d %d %d %d %d %d",jk, &temp[0], &temp[1], &temp[2], &temp[3],
              &temp[4], &temp[5], &temp[6], &temp[7]);
        }
      }
    }
  }
  fclose(cont);
}

  void
Nuca::print_cont_stats()
{
  for(int i=0; i<2; i++) {
    for(int j=2; j<5; j++) {
      for(int k=0; k<ROUTER_TYPES; k++) {
        for(int l=0;l<7; l++) {
          for(int m=0;l<7; l++) {
            cout << cont_stats[i][j][k][l][m] << " ";
          }
          cout << endl;
        }
      }
    }
  }
  cout << endl;
}

Nuca::~Nuca(){
  for (int i = wt_min; i <= wt_max; i++) {
    delete wire_vertical[i];
    delete wire_horizontal[i];
  }
}

/* converts latency (in s) to cycles depending upon the FREQUENCY (in GHz) */
  int
Nuca::calc_cycles(double lat, double oper_freq)
{
  //TODO: convert latch delay to FO4 */
  double cycle_time = (1.0/(oper_freq*1e9)); /*s*/
  cycle_time -= LATCH_DELAY;
  cycle_time -= FIXED_OVERHEAD;

  return (int)ceil(lat/cycle_time);
}


nuca_org_t::~nuca_org_t() {
  // if(h_wire) delete h_wire;
  // if(v_wire) delete v_wire;
  // if(router) delete router;
}

/*
 * Version - 6.0
 *
 * Perform exhaustive search across different bank organizatons,
 * router configurations, grid organizations, and wire models and
 * find an optimal NUCA organization
 * For different bank count values
 * 1. Optimal bank organization is calculated
 * 2. For each bank organization, find different NUCA organizations
 *    using various router configurations, grid organizations,
 *    and wire models.
 * 3. NUCA model with the least cost is picked for
 *    this particular bank count
 * Finally include contention statistics and find the optimal
 *    NUCA configuration
 */
  void
Nuca::sim_nuca()
{
  /* temp variables */
  int it, ro, wr;
  int num_cyc;
  unsigned int i, j;//, k;
  unsigned int r, c;
  int l2_c;
  int bank_count = 0;
  uca_org_t ures;
  nuca_org_t *opt_n;
  mem_array tag, data;
  list<nuca_org_t *> nuca_list;
  Router *router_s[ROUTER_TYPES];
  router_s[0] = new Router(64.0, 8, 4, &(g_tp.peri_global));
  router_s[0]->print_router();
  router_s[1] = new Router(128.0, 8, 4, &(g_tp.peri_global));
  router_s[1]->print_router();
  router_s[2] = new Router(256.0, 8, 4, &(g_tp.peri_global));
  router_s[2]->print_router();

  int core_in; // to store no. of cores

  /* to search diff grid organizations */
  double curr_hop, totno_hops, totno_hhops, totno_vhops, tot_lat,
         curr_acclat;
  double avg_lat, avg_hop, avg_hhop, avg_vhop, avg_dyn_power,
         avg_leakage_power;

  double opt_acclat = INF;//, opt_avg_lat = INF, opt_tot_lat = INF;
  int opt_rows = 0;
  int opt_columns = 0;
//  double opt_totno_hops = 0;
  double opt_avg_hop = 0;
  double opt_dyn_power = 0, opt_leakage_power = 0;
  min_values_t minval;

  int bank_start = 0;

  int flit_width = 0;

  /* vertical and horizontal hop latency values */
  int ver_hop_lat, hor_hop_lat; /* in cycles */


  /* no. of different bank sizes to consider */
  int iterations;


  g_ip->nuca_cache_sz = g_ip->cache_sz;
  nuca_list.push_back(new nuca_org_t());

  if (g_ip->cache_level == 0) l2_c = 1;
  else l2_c = 0;

  if (g_ip->cores <= 4) core_in = 2;
  else if (g_ip->cores <= 8) core_in = 3;
  else if (g_ip->cores <= 16) core_in = 4;
  else {cout << "Number of cores should be <= 16!\n"; exit(0);}


  // set the lower bound to an appropriate value. this depends on cache associativity
  if (g_ip->assoc > 2) {
    i = 2;
    while (i != g_ip->assoc) {
      MIN_BANKSIZE *= 2;
      i *= 2;
    }
  }

  iterations = (int)logtwo((int)g_ip->cache_sz/MIN_BANKSIZE);

  if (g_ip->force_wiretype)
  {
    if (g_ip->wt == Low_swing) {
      wt_min = Low_swing;
      wt_max = Low_swing;
    }
    else {
      wt_min = Global;
      wt_max = Low_swing-1;
    }
  }
  else {
    wt_min = Global;
    wt_max = Low_swing;
  }
  if (g_ip->nuca_bank_count != 0) { // simulate just one bank
    if (g_ip->nuca_bank_count != 2 && g_ip->nuca_bank_count != 4 &&
        g_ip->nuca_bank_count != 8 && g_ip->nuca_bank_count != 16 &&
        g_ip->nuca_bank_count != 32 && g_ip->nuca_bank_count != 64) {
      fprintf(stderr,"Incorrect bank count value! Please fix the value in cache.cfg\n");
    }
    bank_start = (int)logtwo((double)g_ip->nuca_bank_count);
    iterations = bank_start+1;
    g_ip->cache_sz = g_ip->cache_sz/g_ip->nuca_bank_count;
  }
  cout << "Simulating various NUCA configurations\n";
  for (it=bank_start; it<iterations; it++) { /* different bank count values */
    ures.tag_array2 = &tag;
    ures.data_array2 = &data;
    /*
     * find the optimal bank organization
     */
    solve(&ures);
//    output_UCA(&ures);
    bank_count = g_ip->nuca_cache_sz/g_ip->cache_sz;
    cout << "====" <<  g_ip->cache_sz << "\n";

    for (wr=wt_min; wr<=wt_max; wr++) {

      for (ro=0; ro<ROUTER_TYPES; ro++)
      {
        flit_width = (int) router_s[ro]->flit_size; //initialize router
        nuca_list.back()->nuca_pda.cycle_time = router_s[ro]->cycle_time;

        /* calculate router and wire parameters */

        double vlength = ures.cache_ht; /* length of the wire (u)*/
        double hlength = ures.cache_len; // u

        /* find delay, area, and power for wires */
        wire_vertical[wr] = new Wire((enum Wire_type) wr, vlength);
        wire_horizontal[wr] = new Wire((enum Wire_type) wr, hlength);


        hor_hop_lat = calc_cycles(wire_horizontal[wr]->delay,
            1/(nuca_list.back()->nuca_pda.cycle_time*.001));
        ver_hop_lat = calc_cycles(wire_vertical[wr]->delay,
            1/(nuca_list.back()->nuca_pda.cycle_time*.001));

        /*
         * assume a grid like topology and explore for optimal network
         * configuration using different row and column count values.
         */
        for (c=1; c<=(unsigned int)bank_count; c++) {
          while (bank_count%c != 0) c++;
          r = bank_count/c;

          /*
           * to find the avg access latency of a NUCA cache, uncontended
           * access time to each bank from the
           * cache controller is calculated.
           * avg latency =
           * sum of the access latencies to individual banks)/bank
           * count value.
           */
          totno_hops = totno_hhops = totno_vhops = tot_lat = 0;
///          k = 1;
          for (i=0; i<r; i++) {
            for (j=0; j<c; j++) {
              /*
               * vertical hops including the
               * first hop from the cache controller
               */
              curr_hop = i + 1;
              curr_hop += j; /* horizontal hops */
              totno_hhops += j;
              totno_vhops += (i+1);
              curr_acclat = (i * ver_hop_lat + CONTR_2_BANK_LAT +
                  j * hor_hop_lat);

              tot_lat += curr_acclat;
              totno_hops += curr_hop;
            }
          }
          avg_lat = tot_lat/bank_count;
          avg_hop = totno_hops/bank_count;
          avg_hhop = totno_hhops/bank_count;
          avg_vhop = totno_vhops/bank_count;

          /* net access latency */
          curr_acclat = 2*avg_lat + 2*(router_s[ro]->delay*avg_hop) +
            calc_cycles(ures.access_time,
                1/(nuca_list.back()->nuca_pda.cycle_time*.001));

          /* avg access lat of nuca */
          avg_dyn_power =
            avg_hop *
            (router_s[ro]->power.readOp.dynamic) + avg_hhop *
            (wire_horizontal[wr]->power.readOp.dynamic) *
            (g_ip->block_sz*8 + 64) + avg_vhop *
            (wire_vertical[wr]->power.readOp.dynamic) *
            (g_ip->block_sz*8 + 64) + ures.power.readOp.dynamic;

          avg_leakage_power =
            bank_count * router_s[ro]->power.readOp.leakage +
            avg_hhop * (wire_horizontal[wr]->power.readOp.leakage*
                wire_horizontal[wr]->delay) * flit_width +
            avg_vhop * (wire_vertical[wr]->power.readOp.leakage *
                wire_horizontal[wr]->delay);

          if (curr_acclat < opt_acclat) {
            opt_acclat = curr_acclat;
///            opt_tot_lat = tot_lat;
///            opt_avg_lat = avg_lat;
///            opt_totno_hops = totno_hops;
            opt_avg_hop = avg_hop;
            opt_rows = r;
            opt_columns = c;
            opt_dyn_power = avg_dyn_power;
            opt_leakage_power = avg_leakage_power;
          }
          totno_hops = 0;
          tot_lat = 0;
          totno_hhops = 0;
          totno_vhops = 0;
        }
        nuca_list.back()->wire_pda.power.readOp.dynamic =
          opt_avg_hop * flit_width *
          (wire_horizontal[wr]->power.readOp.dynamic +
           wire_vertical[wr]->power.readOp.dynamic);
        nuca_list.back()->avg_hops = opt_avg_hop;
        /* network delay/power */
        nuca_list.back()->h_wire = wire_horizontal[wr];
        nuca_list.back()->v_wire = wire_vertical[wr];
        nuca_list.back()->router = router_s[ro];
        /* bank delay/power */

        nuca_list.back()->bank_pda.delay = ures.access_time;
        nuca_list.back()->bank_pda.power = ures.power;
        nuca_list.back()->bank_pda.area.h = ures.cache_ht;
        nuca_list.back()->bank_pda.area.w = ures.cache_len;
        nuca_list.back()->bank_pda.cycle_time = ures.cycle_time;

        num_cyc = calc_cycles(nuca_list.back()->bank_pda.delay /*s*/,
            1/(nuca_list.back()->nuca_pda.cycle_time*.001/*GHz*/));
        if(num_cyc%2 != 0) num_cyc++;
        if (num_cyc > 16) num_cyc = 16; // we have data only up to 16 cycles

        if (it < 7) {
          nuca_list.back()->nuca_pda.delay = opt_acclat +
            cont_stats[l2_c][core_in][ro][it][num_cyc/2-1];
          nuca_list.back()->contention =
            cont_stats[l2_c][core_in][ro][it][num_cyc/2-1];
        }
        else {
          nuca_list.back()->nuca_pda.delay = opt_acclat +
            cont_stats[l2_c][core_in][ro][7][num_cyc/2-1];
          nuca_list.back()->contention =
            cont_stats[l2_c][core_in][ro][7][num_cyc/2-1];
        }
        nuca_list.back()->nuca_pda.power.readOp.dynamic = opt_dyn_power;
        nuca_list.back()->nuca_pda.power.readOp.leakage = opt_leakage_power;

        /* array organization */
        nuca_list.back()->bank_count = bank_count;
        nuca_list.back()->rows = opt_rows;
        nuca_list.back()->columns = opt_columns;
        calculate_nuca_area (nuca_list.back());

        minval.update_min_values(nuca_list.back());
        nuca_list.push_back(new nuca_org_t());
        opt_acclat = BIGNUM;

      }
    }
    g_ip->cache_sz /= 2;
  }

  delete(nuca_list.back());
  nuca_list.pop_back();
  opt_n = find_optimal_nuca(&nuca_list, &minval);
  print_nuca(opt_n);
  g_ip->cache_sz = g_ip->nuca_cache_sz/opt_n->bank_count;

  list<nuca_org_t *>::iterator niter;
  for (niter = nuca_list.begin(); niter != nuca_list.end(); ++niter)
  {
    delete *niter;
  }
  nuca_list.clear();

  for(int i=0; i < ROUTER_TYPES; i++)
  {
    delete router_s[i];
  }
  g_ip->display_ip();
  //  g_ip->force_cache_config = true;
  //  g_ip->ndwl = 8;
  //  g_ip->ndbl = 16;
  //  g_ip->nspd = 4;
  //  g_ip->ndcm = 1;
  //  g_ip->ndsam1 = 8;
  //  g_ip->ndsam2 = 32;

}


  void
Nuca::print_nuca (nuca_org_t *fr)
{
  printf("\n---------- CACTI version 6.5, Non-uniform Cache Access "
      "----------\n\n");
  printf("Optimal number of banks - %d\n", fr->bank_count);
  printf("Grid organization rows x columns - %d x %d\n",
      fr->rows, fr->columns);
  printf("Network frequency - %g GHz\n",
      (1/fr->nuca_pda.cycle_time)*1e3);
  printf("Cache dimension (mm x mm) - %g x %g\n",
      fr->nuca_pda.area.h*1e-3,
      fr->nuca_pda.area.w*1e-3);

  fr->router->print_router();

  printf("\n\nWire stats:\n");
  if (fr->h_wire->wt == Global) {
    printf("\tWire type - Full swing global wires with least "
        "possible delay\n");
  }
  else if (fr->h_wire->wt == Global_5) {
    printf("\tWire type - Full swing global wires with "
        "5%% delay penalty\n");
  }
  else if (fr->h_wire->wt == Global_10) {
    printf("\tWire type - Full swing global wires with "
        "10%% delay penalty\n");
  }
  else if (fr->h_wire->wt == Global_20) {
    printf("\tWire type - Full swing global wires with "
        "20%% delay penalty\n");
  }
  else if (fr->h_wire->wt == Global_30) {
    printf("\tWire type - Full swing global wires with "
        "30%% delay penalty\n");
  }
  else if(fr->h_wire->wt == Low_swing) {
    printf("\tWire type - Low swing wires\n");
  }

  printf("\tHorizontal link delay - %g (ns)\n",
      fr->h_wire->delay*1e9);
  printf("\tVertical link delay - %g (ns)\n",
      fr->v_wire->delay*1e9);
  printf("\tDelay/length - %g (ns/mm)\n",
      fr->h_wire->delay*1e9/fr->bank_pda.area.w);
  printf("\tHorizontal link energy -dynamic/access %g (nJ)\n"
      "\t                       -leakage %g (nW)\n\n",
      fr->h_wire->power.readOp.dynamic*1e9,
      fr->h_wire->power.readOp.leakage*1e9);
  printf("\tVertical link energy -dynamic/access %g (nJ)\n"
      "\t                     -leakage %g (nW)\n\n",
      fr->v_wire->power.readOp.dynamic*1e9,
      fr->v_wire->power.readOp.leakage*1e9);
  printf("\n\n");
  fr->v_wire->print_wire();
  printf("\n\nBank stats:\n");
}


  nuca_org_t *
Nuca::find_optimal_nuca (list<nuca_org_t *> *n, min_values_t *minval)
{
  double cost = 0;
  double min_cost = BIGNUM;
  nuca_org_t *res = NULL;
  float d, a, dp, lp, c;
  int v;
  dp = g_ip->dynamic_power_wt_nuca;
  lp = g_ip->leakage_power_wt_nuca;
  a = g_ip->area_wt_nuca;
  d = g_ip->delay_wt_nuca;
  c = g_ip->cycle_time_wt_nuca;

  list<nuca_org_t *>::iterator niter;


  for (niter = n->begin(); niter != n->end(); niter++) {
    fprintf(stderr, "\n-----------------------------"
        "---------------\n");


    printf("NUCA___stats %d \tbankcount: lat = %g \tdynP = %g \twt = %d\t "
        "bank_dpower = %g \tleak = %g \tcycle = %g\n",
        (*niter)->bank_count,
        (*niter)->nuca_pda.delay,
        (*niter)->nuca_pda.power.readOp.dynamic,
        (*niter)->h_wire->wt,
        (*niter)->bank_pda.power.readOp.dynamic,
        (*niter)->nuca_pda.power.readOp.leakage,
        (*niter)->nuca_pda.cycle_time);


    if (g_ip->ed == 1) {
      cost = ((*niter)->nuca_pda.delay/minval->min_delay)*
        ((*niter)->nuca_pda.power.readOp.dynamic/minval->min_dyn);
      if (min_cost > cost) {
        min_cost = cost;
        res = ((*niter));
      }
    }
    else if (g_ip->ed == 2) {
      cost = ((*niter)->nuca_pda.delay/minval->min_delay)*
        ((*niter)->nuca_pda.delay/minval->min_delay)*
        ((*niter)->nuca_pda.power.readOp.dynamic/minval->min_dyn);
      if (min_cost > cost) {
        min_cost = cost;
        res = ((*niter));
      }
    }
    else {
      /*
       * check whether the current organization
       * meets the input deviation constraints
       */
      v = check_nuca_org((*niter), minval);
      if (minval->min_leakage == 0) minval->min_leakage = 0.1; //FIXME remove this after leakage modeling

      if (v) {
        cost = (d  * ((*niter)->nuca_pda.delay/minval->min_delay) +
            c  * ((*niter)->nuca_pda.cycle_time/minval->min_cyc) +
            dp * ((*niter)->nuca_pda.power.readOp.dynamic/minval->min_dyn) +
            lp * ((*niter)->nuca_pda.power.readOp.leakage/minval->min_leakage) +
            a  * ((*niter)->nuca_pda.area.get_area()/minval->min_area));
        fprintf(stderr, "cost = %g\n", cost);

        if (min_cost > cost) {
          min_cost = cost;
          res = ((*niter));
        }
      }
      else {
        niter = n->erase(niter);
        if (niter !=n->begin())
        	niter --;
      }
    }
  }
  return res;
}

  int
Nuca::check_nuca_org (nuca_org_t *n, min_values_t *minval)
{
  if (((n->nuca_pda.delay - minval->min_delay)*100/minval->min_delay) > g_ip->delay_dev_nuca) {
    return 0;
  }
  if (((n->nuca_pda.power.readOp.dynamic - minval->min_dyn)/minval->min_dyn)*100 >
      g_ip->dynamic_power_dev_nuca) {
    return 0;
  }
  if (((n->nuca_pda.power.readOp.leakage - minval->min_leakage)/minval->min_leakage)*100 >
      g_ip->leakage_power_dev_nuca) {
    return 0;
  }
  if (((n->nuca_pda.cycle_time - minval->min_cyc)/minval->min_cyc)*100 >
      g_ip->cycle_time_dev_nuca) {
    return 0;
  }
  if (((n->nuca_pda.area.get_area() - minval->min_area)/minval->min_area)*100 >
      g_ip->area_dev_nuca) {
    return 0;
  }
  return 1;
}

  void
Nuca::calculate_nuca_area (nuca_org_t *nuca)
{
  nuca->nuca_pda.area.h=
    nuca->rows * ((nuca->h_wire->wire_width +
          nuca->h_wire->wire_spacing)
        * nuca->router->flit_size +
        nuca->bank_pda.area.h);

  nuca->nuca_pda.area.w =
    nuca->columns * ((nuca->v_wire->wire_width +
          nuca->v_wire->wire_spacing)
        * nuca->router->flit_size +
        nuca->bank_pda.area.w);
}