higepi/M2_SETI
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
M2_SETI/T1/TP/TP1/cacti_7/extio_technology.cc

1618 lines
45 KiB
C++
Raw Permalink Normal View History

tp T2
2022-11-18 15:07:43 +01:00
#include "extio_technology.h"
#include "cacti_interface.h"
#include <cassert>
/* This file contains configuration parameters, including
* default configuration for DDR3, LPDDR2 and WIDEIO. The configuration
* parameters include technology parameters - voltage, load capacitances, IO
* area coefficients, timing parameters, as well as external io configuration parameters -
* termination values, voltage noise coefficients and voltage/timing noise
* sensitivity parameters. More details can be found in the CACTI-IO technical
* report (), especially Chapters 2 and 3. The user can define new dram types here. */
///////////// DDR3 ///////////////////
const double rtt1_wr_lrdimm_ddr3[8][4] =
{
{INF,INF,120,120},
{INF,INF,120,120},
{INF,120,120,80},
{120,120,120,60},
{120,120,120,60},
{120,80,80,60},
{120,80,80,60},
{120,80,60,40}
};
const double rtt2_wr_lrdimm_ddr3[8][4] =
{
{INF,INF,INF,INF},//1
{INF,INF,120,120},//2
{120,120,120,80}, //3
{120,120,80,60}, //4
{120,120,80,60},
{120,80,60,40}, //6
{120,80,60,40},
{80,80,40,30}//8
};
const double rtt1_rd_lrdimm_ddr3[8][4] =
{
{INF,INF,120,120},//1
{INF,INF,120,120},//2
{INF,120,120,80}, //3
{120,120,120,60}, //4
{120,120,120,60},
{120,80,80,60}, //6
{120,80,80,60},
{120,80,60,40}//8
};
const double rtt2_rd_lrdimm_ddr3[8][4] =
{
{INF,INF,INF,INF},//1
{INF,120,80,60},//2
{120,80,80,40}, //3
{120,80,60,40}, //4
{120,80,60,40},
{80,60,60,30}, //6
{80,60,60,30},
{80,60,40,20}//8
};
const double rtt1_wr_host_dimm_ddr3[3][4]=
{
{120,120,120,60},
{120,80,80,60},
{120,80,60,40}
};
const double rtt2_wr_host_dimm_ddr3[3][4]=
{
{120,120,80,60},
{120,80,60,40},
{80,80,40,30}
};
const double rtt1_rd_host_dimm_ddr3[3][4]=
{
{120,120,120,60},
{120,80,80,60},
{120,80,60,40}
};
const double rtt2_rd_host_dimm_ddr3[3][4]=
{
{120,80,60,40},
{80,60,60,30},
{80,60,40,20}
};
const double rtt1_wr_bob_dimm_ddr3[3][4]=
{
{INF,120,120,80},
{120,120,120,60},
{120,80,80,60}
};
const double rtt2_wr_bob_dimm_ddr3[3][4]=
{
{120,120,120,80},
{120,120,80,60},
{120,80,60,40}
};
const double rtt1_rd_bob_dimm_ddr3[3][4]=
{
{INF,120,120,80},
{120,120,120,60},
{120,80,80,60}
};
const double rtt2_rd_bob_dimm_ddr3[3][4]=
{
{120,80,80,40},
{120,80,60,40},
{80,60,60,30}
};
///////////// DDR4 ///////////////////
const double rtt1_wr_lrdimm_ddr4[8][4] =
{
{120,120,80,80},//1
{120,120,80,80},//2
{120,80,80,60}, //3
{80,60,60,60}, //4
{80,60,60,60},
{60,60,60,40}, //6
{60,60,60,40},
{40,40,40,40}//8
};
const double rtt2_wr_lrdimm_ddr4[8][4] =
{
{INF,INF,INF,INF},//1
{120,120,120,80},//2
{120,80,80,80},//3
{80,80,80,60},//4
{80,80,80,60},
{60,60,60,40},//6
{60,60,60,40},
{60,40,40,30}//8
};
const double rtt1_rd_lrdimm_ddr4[8][4] =
{
{120,120,80,80},//1
{120,120,80,60},//2
{120,80,80,60}, //3
{120,60,60,60}, //4
{120,60,60,60},
{80,60,60,40}, //6
{80,60,60,40},
{60,40,40,30}//8
};
const double rtt2_rd_lrdimm_ddr4[8][4] =
{
{INF,INF,INF,INF},//1
{80,60,60,60},//2
{60,60,40,40}, //3
{60,40,40,40}, //4
{60,40,40,40},
{40,40,40,30}, //6
{40,40,40,30},
{40,30,30,20}//8
};
const double rtt1_wr_host_dimm_ddr4[3][4]=
{
{80,60,60,60},
{60,60,60,60},
{40,40,40,40}
};
const double rtt2_wr_host_dimm_ddr4[3][4]=
{
{80,80,80,60},
{60,60,60,40},
{60,40,40,30}
};
const double rtt1_rd_host_dimm_ddr4[3][4]=
{
{120,60,60,60},
{80,60,60,40},
{60,40,40,30}
};
const double rtt2_rd_host_dimm_ddr4[3][4]=
{
{60,40,40,40},
{40,40,40,30},
{40,30,30,20}
};
const double rtt1_wr_bob_dimm_ddr4[3][4]=
{
{120,80,80,60},
{80,60,60,60},
{60,60,60,40}
};
const double rtt2_wr_bob_dimm_ddr4[3][4]=
{
{120,80,80,80},
{80,80,80,60},
{60,60,60,40}
};
const double rtt1_rd_bob_dimm_ddr4[3][4]=
{
{120,80,80,60},
{120,60,60,60},
{80,60,60,40}
};
const double rtt2_rd_bob_dimm_ddr4[3][4]=
{
{60,60,40,40},
{60,40,40,40},
{40,40,40,30}
};
/////////////////////////////////////////////
int IOTechParam::frequnecy_index(Mem_IO_type type)
{
if(type==DDR3)
{
if(frequency<=400)
return 0;
else if(frequency<=533)
return 1;
else if(frequency<=667)
return 2;
else
return 3;
}
else if(type==DDR4)
{
if(frequency<=800)
return 0;
else if(frequency<=933)
return 1;
else if(frequency<=1066)
return 2;
else
return 3;
}
else
{
assert(false);
}
return 0;
}
IOTechParam::IOTechParam(InputParameter * g_ip)
{
num_mem_ca = g_ip->num_mem_dq * (g_ip->num_dq/g_ip->mem_data_width);
num_mem_clk = g_ip->num_mem_dq *
(g_ip->num_dq/g_ip->mem_data_width)/(g_ip->num_clk/2);
if (g_ip->io_type == LPDDR2) { //LPDDR
//Technology Parameters
vdd_io = 1.2;
v_sw_clk = 1;
// Loading paramters
c_int = 1.5;
c_tx = 2;
c_data = 1.5;
c_addr = 0.75;
i_bias = 5;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.5;
ioarea_k1 = 0.00008;
ioarea_k2 = 0.000000030;
ioarea_k3 = 0.000000000008;
// Timing parameters (ps)
t_ds = 250;
t_is = 250;
t_dh = 250;
t_ih = 250;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 50;
t_skew_setup = 50;
t_skew_hold = 50;
t_dqsq = 250;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 200;
t_jitter_hold = 200;
t_jitter_addr_setup = 200;
t_jitter_addr_hold = 200;
t_cor_margin = 40;
//External IO Configuration Parameters
r_diff_term = 480;
rtt1_dq_read = 100000;
rtt2_dq_read = 100000;
rtt1_dq_write = 100000;
rtt2_dq_write = 100000;
rtt_ca = 240;
rs1_dq = 0;
rs2_dq = 0;
r_stub_ca = 0;
r_on = 50;
r_on_ca = 50;
z0 = 50;
t_flight = 0.5;
t_flight_ca = 0.5;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/100 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.1*(r_on/34 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.1*(r_on/34 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/100 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/100 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 5;
phy_clock_tree_s = 0;
phy_rx_s = 3;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 2;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.3;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.4;
phy_rx_d = 0.2;
phy_dcc_d = 0;
phy_deskew_d = 0;
phy_leveling_d = 0;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0;
phy_vrefgen_wtime = 0;
}
else if (g_ip->io_type == WideIO) { //WIDEIO
//Technology Parameters
vdd_io = 1.2;
v_sw_clk = 1.2;
// Loading parameters
c_int = 0.5;
c_tx = 0.5;
c_data = 0.5;
c_addr = 0.35;
i_bias = 0;
i_leak = 500;
// IO Area coefficients
ioarea_c = 0.003;
ioarea_k0 = 0.2;
ioarea_k1 = 0.00004;
ioarea_k2 = 0.000000020;
ioarea_k3 = 0.000000000004;
// Timing parameters (ps)
t_ds = 250;
t_is = 250;
t_dh = 250;
t_ih = 250;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 50;
t_skew_setup = 50;
t_skew_hold = 50;
t_dqsq = 250;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 200;
t_jitter_hold = 200;
t_jitter_addr_setup = 200;
t_jitter_addr_hold = 200;
t_cor_margin = 50;
//External IO Configuration Parameters
r_diff_term = 100000;
rtt1_dq_read = 100000;
rtt2_dq_read = 100000;
rtt1_dq_write = 100000;
rtt2_dq_write = 100000;
rtt_ca = 100000;
rs1_dq = 0;
rs2_dq = 0;
r_stub_ca = 0;
r_on = 75;
r_on_ca = 75;
z0 = 50;
t_flight = 0.05;
t_flight_ca = 0.05;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.2*(r_on/50 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.2*(r_on/50 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.2*(r_on/50 - 1) +
0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.1*(r_on/50 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.1*(r_on/50 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.1*(r_on/50 - 1) +
0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.1*(r_on/50 - 1) +
0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 1;
phy_clock_tree_s = 0;
phy_rx_s = 0;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 0;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.3;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.2;
phy_rx_d = 0.1;
phy_dcc_d = 0;
phy_deskew_d = 0;
phy_leveling_d = 0;
phy_pll_d = 0;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 0;
phy_rx_wtime = 0;
phy_bandgap_wtime = 0;
phy_deskew_wtime = 0;
phy_vrefgen_wtime = 0;
}
else if (g_ip->io_type == DDR3)
{ //Default parameters for DDR3
// IO Supply voltage (V)
vdd_io = 1.5;
v_sw_clk = 0.75;
// Loading parameters
c_int = 1.5;
c_tx = 2;
c_data = 1.5;
c_addr = 0.75;
i_bias = 15;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.5;
ioarea_k1 = 0.00015;
ioarea_k2 = 0.000000045;
ioarea_k3 = 0.000000000015;
// Timing parameters (ps)
t_ds = 150;
t_is = 150;
t_dh = 150;
t_ih = 150;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 25;
t_skew_setup = 25;
t_skew_hold = 25;
t_dqsq = 100;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 100;
t_jitter_hold = 100;
t_jitter_addr_setup = 100;
t_jitter_addr_hold = 100;
t_cor_margin = 30;
//External IO Configuration Parameters
r_diff_term = 100;
rtt1_dq_read = g_ip->rtt_value;
rtt2_dq_read = g_ip->rtt_value;
rtt1_dq_write = g_ip->rtt_value;
rtt2_dq_write = g_ip->rtt_value;
rtt_ca = 50;
rs1_dq = 15;
rs2_dq = 15;
r_stub_ca = 0;
r_on = g_ip->ron_value;
r_on_ca = 50;
z0 = 50;
t_flight = g_ip->tflight_value;
t_flight_ca = 2;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.1*(rtt1_dq_write/60 - 1) +
0.2*(rtt2_dq_write/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.1*(rtt1_dq_read/60 - 1) +
0.2*(rtt2_dq_read/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/50 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) + 0.1*(r_on/34 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) +
0.1*(r_on/34 - 1) + 0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else if (g_ip->io_type == DDR4)
{ //Default parameters for DDR4
// IO Supply voltage (V)
vdd_io = 1.2;
v_sw_clk = 0.6;
// Loading parameters
c_int = 1.5;
c_tx = 2;
c_data = 1;
c_addr = 0.75;
i_bias = 15;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.35;
ioarea_k1 = 0.00008;
ioarea_k2 = 0.000000035;
ioarea_k3 = 0.000000000010;
// Timing parameters (ps)
t_ds = 30;
t_is = 60;
t_dh = 30;
t_ih = 60;
t_dcd_soc = 20;
t_dcd_dram = 20;
t_error_soc = 15;
t_skew_setup = 15;
t_skew_hold = 15;
t_dqsq = 50;
t_soc_setup = 20;
t_soc_hold = 10;
t_jitter_setup = 30;
t_jitter_hold = 30;
t_jitter_addr_setup = 60;
t_jitter_addr_hold = 60;
t_cor_margin = 10;
//External IO Configuration Parameters
r_diff_term = 100;
rtt1_dq_read = g_ip->rtt_value;
rtt2_dq_read = g_ip->rtt_value;
rtt1_dq_write = g_ip->rtt_value;
rtt2_dq_write = g_ip->rtt_value;
rtt_ca = 50;
rs1_dq = 15;
rs2_dq = 15;
r_stub_ca = 0;
r_on = g_ip->ron_value;
r_on_ca = 50;
z0 = 50;
t_flight = g_ip->tflight_value;
t_flight_ca = 2;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.1*(rtt1_dq_write/60 - 1) +
0.2*(rtt2_dq_write/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.1*(rtt1_dq_read/60 - 1) +
0.2*(rtt2_dq_read/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(g_ip->num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/50 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) + 0.1*(r_on/34 - 1) +
0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) +
0.1*(r_on/34 - 1) + 0.3*(g_ip->num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else if (g_ip->io_type == Serial)
{ //Default parameters for Serial
// IO Supply voltage (V)
vdd_io = 1.2;
v_sw_clk = 0.75;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.15;
ioarea_k1 = 0.00005;
ioarea_k2 = 0.000000025;
ioarea_k3 = 0.000000000005;
// Timing parameters (ps)
t_ds = 15;
t_dh = 15;
t_dcd_soc = 10;
t_dcd_dram = 10;
t_soc_setup = 10;
t_soc_hold = 10;
t_jitter_setup = 20;
t_jitter_hold = 20;
//External IO Configuration Parameters
r_diff_term = 100;
t_jitter_setup_sen = t_jitter_setup;
t_jitter_hold_sen = t_jitter_hold;
t_jitter_addr_setup_sen = t_jitter_addr_setup;
t_jitter_addr_hold_sen = t_jitter_addr_hold;
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else
{
cout << "Not Yet supported" << endl;
exit(1);
}
//SWING AND TERMINATION CALCULATIONS
//R|| calculation
rpar_write =(rtt1_dq_write + rs1_dq)*(rtt2_dq_write + rs2_dq)/
(rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq);
rpar_read =(rtt1_dq_read)*(rtt2_dq_read + rs2_dq)/
(rtt1_dq_read + rtt2_dq_read + rs2_dq);
//Swing calculation
v_sw_data_read_load1 =vdd_io * (rtt1_dq_read)*(rtt2_dq_read + rs2_dq) /
((rtt1_dq_read + rtt2_dq_read + rs2_dq)*(r_on + rs1_dq + rpar_read));
v_sw_data_read_load2 =vdd_io * (rtt1_dq_read)*(rtt2_dq_read) /
((rtt1_dq_read + rtt2_dq_read + rs2_dq)*(r_on + rs1_dq + rpar_read));
v_sw_data_read_line =vdd_io * rpar_read / (r_on + rs1_dq + rpar_read);
v_sw_addr =vdd_io * rtt_ca / (50 + rtt_ca);
v_sw_data_write_load1 =vdd_io * (rtt1_dq_write)*(rtt2_dq_write + rs2_dq) /
((rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq)*(r_on + rpar_write));
v_sw_data_write_load2 =vdd_io * (rtt2_dq_write)*(rtt1_dq_write + rs1_dq) /
((rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq)*(r_on + rpar_write));
v_sw_data_write_line =vdd_io * rpar_write / (r_on + rpar_write);
}
// This constructor recieves most of the input from g_ip.
// however it is possible to customize other some of the paremeters,
// that are mentioned as inputs.
// connection: 0 bob-dimm, 1 host-dimm, 2 lrdimm
IOTechParam::IOTechParam(InputParameter * g_ip, Mem_IO_type io_type1, int num_mem_dq, int mem_data_width
, int num_dq, int connection, int num_loads, double freq)
{
num_mem_ca = num_mem_dq * (mem_data_width);
num_mem_clk = num_mem_dq *
(num_dq/mem_data_width)/(g_ip->num_clk/2);
io_type = io_type1;
frequency = freq;
if (io_type == LPDDR2) { //LPDDR
//Technology Parameters
vdd_io = 1.2;
v_sw_clk = 1;
// Loading paramters
c_int = 1.5;
c_tx = 2;
c_data = 1.5;
c_addr = 0.75;
i_bias = 5;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.5;
ioarea_k1 = 0.00008;
ioarea_k2 = 0.000000030;
ioarea_k3 = 0.000000000008;
// Timing parameters (ps)
t_ds = 250;
t_is = 250;
t_dh = 250;
t_ih = 250;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 50;
t_skew_setup = 50;
t_skew_hold = 50;
t_dqsq = 250;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 200;
t_jitter_hold = 200;
t_jitter_addr_setup = 200;
t_jitter_addr_hold = 200;
t_cor_margin = 40;
//External IO Configuration Parameters
r_diff_term = 480;
rtt1_dq_read = 100000;
rtt2_dq_read = 100000;
rtt1_dq_write = 100000;
rtt2_dq_write = 100000;
rtt_ca = 240;
rs1_dq = 0;
rs2_dq = 0;
r_stub_ca = 0;
r_on = 50;
r_on_ca = 50;
z0 = 50;
t_flight = 0.5;
t_flight_ca = 0.5;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/100 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.1*(r_on/34 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.1*(r_on/34 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/100 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/100 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 5;
phy_clock_tree_s = 0;
phy_rx_s = 3;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 2;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.3;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.4;
phy_rx_d = 0.2;
phy_dcc_d = 0;
phy_deskew_d = 0;
phy_leveling_d = 0;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0;
phy_vrefgen_wtime = 0;
}
else if (io_type == WideIO) { //WIDEIO
//Technology Parameters
vdd_io = 1.2;
v_sw_clk = 1.2;
// Loading parameters
c_int = 0.5;
c_tx = 0.5;
c_data = 0.5;
c_addr = 0.35;
i_bias = 0;
i_leak = 500;
// IO Area coefficients
ioarea_c = 0.003;
ioarea_k0 = 0.2;
ioarea_k1 = 0.00004;
ioarea_k2 = 0.000000020;
ioarea_k3 = 0.000000000004;
// Timing parameters (ps)
t_ds = 250;
t_is = 250;
t_dh = 250;
t_ih = 250;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 50;
t_skew_setup = 50;
t_skew_hold = 50;
t_dqsq = 250;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 200;
t_jitter_hold = 200;
t_jitter_addr_setup = 200;
t_jitter_addr_hold = 200;
t_cor_margin = 50;
//External IO Configuration Parameters
r_diff_term = 100000;
rtt1_dq_read = 100000;
rtt2_dq_read = 100000;
rtt1_dq_write = 100000;
rtt2_dq_write = 100000;
rtt_ca = 100000;
rs1_dq = 0;
rs2_dq = 0;
r_stub_ca = 0;
r_on = 75;
r_on_ca = 75;
z0 = 50;
t_flight = 0.05;
t_flight_ca = 0.05;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.2*(r_on/50 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.2*(r_on/50 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.2*(r_on/50 - 1) +
0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.1*(r_on/50 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.1*(r_on/50 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.1*(r_on/50 - 1) +
0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.1*(r_on/50 - 1) +
0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 1;
phy_clock_tree_s = 0;
phy_rx_s = 0;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 0;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.3;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.2;
phy_rx_d = 0.1;
phy_dcc_d = 0;
phy_deskew_d = 0;
phy_leveling_d = 0;
phy_pll_d = 0;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 0;
phy_rx_wtime = 0;
phy_bandgap_wtime = 0;
phy_deskew_wtime = 0;
phy_vrefgen_wtime = 0;
}
else if (io_type == DDR3)
{ //Default parameters for DDR3
// IO Supply voltage (V)
vdd_io = 1.5;
v_sw_clk = 0.75;
// Loading parameters
c_int = 1.5;
c_tx = 2;
c_data = 1.5;
c_addr = 0.75;
i_bias = 15;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.5;
ioarea_k1 = 0.00015;
ioarea_k2 = 0.000000045;
ioarea_k3 = 0.000000000015;
// Timing parameters (ps)
t_ds = 150;
t_is = 150;
t_dh = 150;
t_ih = 150;
t_dcd_soc = 50;
t_dcd_dram = 50;
t_error_soc = 25;
t_skew_setup = 25;
t_skew_hold = 25;
t_dqsq = 100;
t_soc_setup = 50;
t_soc_hold = 50;
t_jitter_setup = 100;
t_jitter_hold = 100;
t_jitter_addr_setup = 100;
t_jitter_addr_hold = 100;
t_cor_margin = 30;
//External IO Configuration Parameters
r_diff_term = 100;
/*
rtt1_dq_read = g_ip->rtt_value;
rtt2_dq_read = g_ip->rtt_value;
rtt1_dq_write = g_ip->rtt_value;
rtt2_dq_write = g_ip->rtt_value;
*/
switch(connection)
{
case(0):
rtt1_dq_write = rtt1_wr_bob_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_bob_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_bob_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_bob_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
break;
case(1):
rtt1_dq_write = rtt1_wr_host_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_host_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_host_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_host_dimm_ddr3[num_loads-1][frequnecy_index(io_type)];
break;
case(2):
rtt1_dq_write = rtt1_wr_lrdimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_lrdimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_lrdimm_ddr3[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_lrdimm_ddr3[num_loads-1][frequnecy_index(io_type)];
break;
default:
break;
}
rtt_ca = 50;
rs1_dq = 15;
rs2_dq = 15;
r_stub_ca = 0;
r_on = g_ip->ron_value;
r_on_ca = 50;
z0 = 50;
t_flight = g_ip->tflight_value;
t_flight_ca = 2;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.1*(rtt1_dq_write/60 - 1) +
0.2*(rtt2_dq_write/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.1*(rtt1_dq_read/60 - 1) +
0.2*(rtt2_dq_read/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/50 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) + 0.1*(r_on/34 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) +
0.1*(r_on/34 - 1) + 0.3*(num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else if (io_type == DDR4)
{ //Default parameters for DDR4
// IO Supply voltage (V)
vdd_io = 1.2;
v_sw_clk = 0.6;
// Loading parameters
c_int = 1.5;
c_tx = 2;
c_data = 1;
c_addr = 0.75;
i_bias = 15;
i_leak = 1000;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.35;
ioarea_k1 = 0.00008;
ioarea_k2 = 0.000000035;
ioarea_k3 = 0.000000000010;
// Timing parameters (ps)
t_ds = 30;
t_is = 60;
t_dh = 30;
t_ih = 60;
t_dcd_soc = 20;
t_dcd_dram = 20;
t_error_soc = 15;
t_skew_setup = 15;
t_skew_hold = 15;
t_dqsq = 50;
t_soc_setup = 20;
t_soc_hold = 10;
t_jitter_setup = 30;
t_jitter_hold = 30;
t_jitter_addr_setup = 60;
t_jitter_addr_hold = 60;
t_cor_margin = 10;
//External IO Configuration Parameters
r_diff_term = 100;
/*
rtt1_dq_read = g_ip->rtt_value;
rtt2_dq_read = g_ip->rtt_value;
rtt1_dq_write = g_ip->rtt_value;
rtt2_dq_write = g_ip->rtt_value;
*/
switch(connection)
{
case(0):
rtt1_dq_write = rtt1_wr_bob_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_bob_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_bob_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_bob_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
break;
case(1):
rtt1_dq_write = rtt1_wr_host_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_host_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_host_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_host_dimm_ddr4[num_loads-1][frequnecy_index(io_type)];
break;
case(2):
rtt1_dq_write = rtt1_wr_lrdimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_write = rtt2_wr_lrdimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt1_dq_read = rtt1_rd_lrdimm_ddr4[num_loads-1][frequnecy_index(io_type)];
rtt2_dq_read = rtt2_rd_lrdimm_ddr4[num_loads-1][frequnecy_index(io_type)];
break;
default:
break;
}
rtt_ca = 50;
rs1_dq = 15;
rs2_dq = 15;
r_stub_ca = 0;
r_on = g_ip->ron_value;
r_on_ca = 50;
z0 = 50;
t_flight = g_ip->tflight_value;
t_flight_ca = 2;
// Voltage noise coeffecients
k_noise_write = 0.2;
k_noise_read = 0.2;
k_noise_addr = 0.2;
v_noise_independent_write = 0.1;
v_noise_independent_read = 0.1;
v_noise_independent_addr = 0.1;
//SENSITIVITY INPUTS FOR TIMING AND VOLTAGE NOISE
/* This is a user-defined section that depends on the channel sensitivity
* to IO and DRAM parameters. The t_jitter_* and k_noise_* are the
* parameters that are impacted based on the channel analysis. The user
* can define any relationship between the termination, loading and
* configuration parameters AND the t_jitter/k_noise parameters. E.g. a
* linear relationship, a non-linear analytical relationship or a lookup
* table. The sensitivity coefficients are based on channel analysis
* performed on the channel of interest.Given below is an example of such
* a sensitivity relationship.
* Such a linear fit can be found efficiently using an orthogonal design
* of experiments method shown in the technical report (), in Chapter 2.2. */
k_noise_write_sen = k_noise_write * (1 + 0.1*(rtt1_dq_write/60 - 1) +
0.2*(rtt2_dq_write/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_read_sen = k_noise_read * (1 + 0.1*(rtt1_dq_read/60 - 1) +
0.2*(rtt2_dq_read/60 - 1) + 0.2*(r_on/34 - 1) +
0.2*(num_mem_dq/2 - 1));
k_noise_addr_sen = k_noise_addr * (1 + 0.1*(rtt_ca/50 - 1) +
0.2*(r_on/34 - 1) + 0.2*(num_mem_ca/16 - 1));
t_jitter_setup_sen = t_jitter_setup * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) + 0.1*(r_on/34 - 1) +
0.3*(num_mem_dq/2 - 1));
t_jitter_hold_sen = t_jitter_hold * (1 + 0.2*(rtt1_dq_write/60 - 1) +
0.3*(rtt2_dq_write/60 - 1) +
0.1*(r_on/34 - 1) + 0.3*(num_mem_dq/2 - 1));
t_jitter_addr_setup_sen = t_jitter_addr_setup * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
t_jitter_addr_hold_sen = t_jitter_addr_hold * (1 + 0.2*(rtt_ca/50 - 1) +
0.1*(r_on/34 - 1) + 0.4*(num_mem_ca/16 - 1));
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else if (io_type == Serial)
{ //Default parameters for Serial
// IO Supply voltage (V)
vdd_io = 1.2;
v_sw_clk = 0.75;
// IO Area coefficients
ioarea_c = 0.01;
ioarea_k0 = 0.15;
ioarea_k1 = 0.00005;
ioarea_k2 = 0.000000025;
ioarea_k3 = 0.000000000005;
// Timing parameters (ps)
t_ds = 15;
t_dh = 15;
t_dcd_soc = 10;
t_dcd_dram = 10;
t_soc_setup = 10;
t_soc_hold = 10;
t_jitter_setup = 20;
t_jitter_hold = 20;
//External IO Configuration Parameters
r_diff_term = 100;
t_jitter_setup_sen = t_jitter_setup;
t_jitter_hold_sen = t_jitter_hold;
t_jitter_addr_setup_sen = t_jitter_addr_setup;
t_jitter_addr_hold_sen = t_jitter_addr_hold;
// PHY Static Power Coefficients (mW)
phy_datapath_s = 0;
phy_phase_rotator_s = 10;
phy_clock_tree_s = 0;
phy_rx_s = 10;
phy_dcc_s = 0;
phy_deskew_s = 0;
phy_leveling_s = 0;
phy_pll_s = 10;
// PHY Dynamic Power Coefficients (mW/Gbps)
phy_datapath_d = 0.5;
phy_phase_rotator_d = 0.01;
phy_clock_tree_d = 0.5;
phy_rx_d = 0.5;
phy_dcc_d = 0.05;
phy_deskew_d = 0.1;
phy_leveling_d = 0.05;
phy_pll_d = 0.05;
//PHY Wakeup Times (Sleep to Active) (microseconds)
phy_pll_wtime = 10;
phy_phase_rotator_wtime = 5;
phy_rx_wtime = 2;
phy_bandgap_wtime = 10;
phy_deskew_wtime = 0.003;
phy_vrefgen_wtime = 0.5;
}
else
{
cout << "Not Yet supported" << endl;
exit(1);
}
//SWING AND TERMINATION CALCULATIONS
//R|| calculation
rpar_write =(rtt1_dq_write + rs1_dq)*(rtt2_dq_write + rs2_dq)/
(rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq);
rpar_read =(rtt1_dq_read)*(rtt2_dq_read + rs2_dq)/
(rtt1_dq_read + rtt2_dq_read + rs2_dq);
//Swing calculation
v_sw_data_read_load1 =vdd_io * (rtt1_dq_read)*(rtt2_dq_read + rs2_dq) /
((rtt1_dq_read + rtt2_dq_read + rs2_dq)*(r_on + rs1_dq + rpar_read));
v_sw_data_read_load2 =vdd_io * (rtt1_dq_read)*(rtt2_dq_read) /
((rtt1_dq_read + rtt2_dq_read + rs2_dq)*(r_on + rs1_dq + rpar_read));
v_sw_data_read_line =vdd_io * rpar_read / (r_on + rs1_dq + rpar_read);
v_sw_addr =vdd_io * rtt_ca / (50 + rtt_ca);
v_sw_data_write_load1 =vdd_io * (rtt1_dq_write)*(rtt2_dq_write + rs2_dq) /
((rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq)*(r_on + rpar_write));
v_sw_data_write_load2 =vdd_io * (rtt2_dq_write)*(rtt1_dq_write + rs1_dq) /
((rtt1_dq_write + rs1_dq + rtt2_dq_write + rs2_dq)*(r_on + rpar_write));
v_sw_data_write_line =vdd_io * rpar_write / (r_on + rpar_write);
}
IOTechParam::~IOTechParam()
{}
Reference in a new issue Copy permalink