freeradius: improve logging robustness

roles/freeradius/defaults/main.yml

@@ -13,6 +13,7 @@ radiusd__enabled_modules_minimal:
   - logintime # TODO
   - realm # TODO
   - unpack # TODO
+  - rest
   - eap_inner
   - ldap
   - pap

roles/freeradius/tasks/main.yml

@@ -1,7 +1,12 @@
 ---
 - name: Install freeradius
   apt:
-    name: freeradius
+    name:
+      - eapoltest
+      - freeradius
+      - freeradius-ldap
+      - freeradius-rest
+      - freeradius-utils
     install_recommends: false
 
 - name: Remove unused files
@@ -58,6 +63,7 @@
     - mods-available/eap
     - mods-available/ldap
     - mods-available/linelog
+    - mods-available/rest
     - mods-available/eap_inner
     - mods-config/attr_filter/access_challenge
     - mods-config/attr_filter/access_reject

roles/freeradius/templates/mods-available/linelog.j2

@@ -1,38 +1,54 @@
 {{ ansible_managed | comment }}
 
-linelog log_auth_inner {
+linelog_prefix = {{ '[%{Virtual-Server}] (session #%I)' | enquote }}
+
+linelog_inner_prefix = {{ '${.linelog_prefix} from %{%{outer.Calling-Station-Id}:-unknown}:' | enquote }}
+
+linelog linelog_inner_authz_user {
     filename = syslog
     syslog_facility = authpriv
 
-    format = ""
-
-    reference = "{{ 'messages.%{%{reply:Packet-Type}:-default}' }}"
-
-    messages {
-        default = "Unknown packet type %{Packet-Type}"
-
-        Access-Accept = "${..prefix} ACCEPT %{Stripped-User-Name}"
-        Access-Reject = "${..prefix} REJECT %{Stripped-User-Name} (%{Module-Failure-Message})"
+    format = {{ '${..linelog_inner_prefix} received request for "%{jsonquote:%{User-Name}}"' | enquote }}
 }
 
-    prefix = "[%{Virtual-Server}] (session #%n)"
-}
-
-linelog log_auth_outer {
+linelog linelog_inner_postauth {
     filename = syslog
     syslog_facility = authpriv
 
-    format = ""
-
-    reference = "{{ 'messages.%{%{reply:Packet-Type}:-default}' }}"
+    reference = {{ 'messages.%{%{reply:Packet-Type}:-default}' | enquote }}
 
     messages {
-        default = "Unknown packet type %{Packet-Type}"
-
-        Access-Accept = "${..prefix}: ACCEPT %{Stripped-User-Name}"
-        Access-Reject = "${..prefix}: REJECT %{Stripped-User-Name} (%{Module-Failure-Message})"
+        Access-Accept = {{ '${...linelog_inner_prefix} accepted "%{jsonquote:%{User-Name}}"' | enquote }}
+        Access-Reject = {{ '${...linelog_inner_prefix} rejected "%{jsonquote:%{User-Name}}" (%{%{Module-Failure-Message}:-unknown})' | enquote }}
+        default = {{ '${...linelog_inner_prefix} unknown packet type %{Packet-Type}' | enquote }}
+    }
 }
 
-    prefix = "{{ '[%{Virtual-Server}] (session #%n) from %{Calling-Station-Id} via %{NAS-IP-Address}:%{%{NAS-Port}:-0}' }}"
+linelog_outer_prefix = {{ '${.linelog_prefix} from %{%{Calling-Station-Id}:-unknown} via %{NAS-IP-Address} (%{Client-Shortname}):' | enquote }}
+
+linelog linelog_outer_authz_user {
+    filename = syslog
+    syslog_facility = authpriv
+
+    format = {{ '${..linelog_outer_prefix} received request for "%{jsonquote:%{User-Name}}"' | enquote }}
 }
 
+linelog linelog_outer_unknown_domain {
+    filename = syslog
+    syslog_facility = authpriv
+
+    format = {{ '${..linelog_outer_prefix} unknown domain "%{jsonquote:%{Stripped-User-Domain}}"' | enquote }}
+}
+
+linelog linelog_outer_postauth {
+    filename = syslog
+    syslog_facility = authpriv
+
+    reference = {{ 'messages.%{%{reply:Packet-Type}:-default}' | enquote }}
+
+    messages {
+        Access-Accept = {{ '${...linelog_outer_prefix} accepted "%{jsonquote:%{User-Name}}"' | enquote }}
+        Access-Reject = {{ '${...linelog_outer_prefix} rejected "%{jsonquote:%{User-Name}}" (%{%{Module-Failure-Message}:-unknown})' | enquote }}
+        default = {{ '${...linelog_outer_prefix} unknown packet type %{Packet-Type}' | enquote }}
+    }
+}

roles/freeradius/templates/mods-available/rest.j2

@@ -0,0 +1,5 @@
+{{ ansible_managed | comment }}
+
+# Required for jsonquote
+rest {
+}

roles/freeradius/templates/radiusd.conf.j2

@@ -28,7 +28,7 @@ correct_escapes = true
 log {
     destination = syslog
     syslog_facility = daemon
-    auth = yes
+    auth = no
 }
 
 security {

roles/freeradius/templates/sites-available/inner-aurore.j2

@@ -3,13 +3,14 @@
 server inner-aurore {
 
     authorize {
-        # Look for realm using the 'suffix' format (user@realm)
-        suffix
+        linelog_inner_authz_user
+        filter_username
+        filter_inner_identity
+        split_username_nai
         # Don't proxy requests from inner tunnel
         update control {
             &Proxy-To-Realm := LOCAL
         }
-        # TODO: vérifier que le realm est soit vide, soit 'auro.re'
         # Must be before 'ldap', so that we don't query the LDAP server
         # for "internal" packets (cf. documentation for
         # sites-available/inner-tunnel)
@@ -37,10 +38,10 @@ server inner-aurore {
     }
 
     post-auth {
-        Post-Auth-Type REJECT {
-            log_auth_inner
+        linelog_inner_postauth
+        Post-Auth-Type reject {
+            linelog_inner_postauth
         }
-	log_auth_inner
     }
 
 }

roles/freeradius/templates/sites-available/outer-aurore.j2

@@ -25,8 +25,13 @@ server outer-aurore {
     }
 
     authorize {
-        filter_username # TODO
-        suffix
+        linelog_outer_authz_user
+        filter_username
+        split_username_nai
+        if (&Stripped-User-Domain != "auro.re") {
+            linelog_outer_unknown_domain
+            reject
+        }
         eap
     }
 
@@ -55,16 +60,17 @@ server outer-aurore {
             attr_filter.access_reject
             eap
             remove_reply_message_if_eap
-            log_auth_outer
+            linelog_outer_postauth
         }
         remove_reply_message_if_eap
-        log_auth_outer
+        linelog_outer_postauth
     }
 
     pre-proxy {
     }
 
     post-proxy {
+        split_username_nai
         eap
     }