fix bogus dhcpd config

- move failover peer declaration to beginning of file
- set split only on primary
- fix re2o-service hostname
- add /etc/default/isc-dhcp-server

network.yml

@@ -22,7 +22,7 @@
     service_name: dhcp
     service_version: master
     service_config:
-      hostname: re2o.adm.auro.re
+      hostname: re2o.auro.re
       username: service-user
       password: "{{ vault_serviceuser_passwd }}"
   roles:

roles/isc-dhcp-server/tasks/main.yml

@@ -8,14 +8,21 @@
   retries: 3
   until: apt_result is succeeded
 
+
+- name: Configure /etc/default/isc-dhcp-server
+  template:
+    src: default/isc-dhcp-server.j2
+    dest: /etc/default/isc-dhcp-server
+    mode: 0644
+
 - name: Configure isc-dhcp-server
   template:
     src: dhcp/dhcpd.conf.j2
     dest: /etc/dhcp/dhcpd.conf
     mode: 0600
 
-- name: Ensure that isc-dhcp-server is started
+- name: Ensure that isc-dhcp-server is started / reloaded
   systemd:
     name: isc-dhcp-server
-    state: started
+    state: restarted
     enabled: true

roles/isc-dhcp-server/templates/default/isc-dhcp-server.j2

@@ -0,0 +1,18 @@
+# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)
+
+# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
+#DHCPDv4_CONF=/etc/dhcp/dhcpd.conf
+#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf
+
+# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
+#DHCPDv4_PID=/var/run/dhcpd.pid
+#DHCPDv6_PID=/var/run/dhcpd6.pid
+
+# Additional options to start dhcpd with.
+#	Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
+#OPTIONS=""
+
+# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
+#	Separate multiple interfaces with spaces, e.g. "eth0 eth1".
+INTERFACESv4="ens19 ens20 ens21"
+INTERFACESv6=""

roles/isc-dhcp-server/templates/dhcp/dhcpd.conf.j2

@@ -28,6 +28,43 @@ authoritative;
 #log-facility local7;
 
 
+# TODO: move this failover peer declaration to a separate file and include it.
+{% if dhcp_failover is defined %}
+failover peer "dhcp-failover" {
+{% if inventory_hostname == dhcp_failover.primary_host %}
+                primary;
+
+                # MCLT = Maximum Client Lead Time.
+                # Must be specified on the primary, forbidden on the secondary.
+                mclt 3600;
+
+                # Address or DNS name on which this node listens for connections
+                # from its failover peer.
+                address {{ dhcp_failover.primary_host }};
+                peer address {{ dhcp_failover.secondary_host }};
+
+                # Load balancing.
+                split 128;
+{% endif %}
+{% if inventory_hostname == dhcp_failover.secondary_host %}
+                secondary;
+                # Address and peer address are reversed on the secondary node.
+                address {{ dhcp_failover.secondary_host }};
+                peer address {{ dhcp_failover.primary_host }};
+{% endif %}
+
+                # The following options can be shared between primary and
+                # secondary failover peers.
+                port 647;
+                peer port 647;
+                max-response-delay 30;
+                max-unacked-updates 10;
+                load balance max seconds 3;
+          }
+{% endif %}
+
+
+
 # Bornes WiFi
 subnet 10.{{ subnet_ids.ap }}.0.0 netmask 255.255.0.0 {
        interface "ens19";
@@ -74,34 +111,4 @@ subnet 10.{{ subnet_ids.users_wifi }}.0.0 netmask 255.255.0.0 {
        }
 }
 
-{% if dhcp_failover is defined %}
-failover peer "dhcp-failover" {
-{% if inventory_hostname == dhcp_failover.primary_host %}
-                primary;
 
-                # MCLT = Maximum Client Lead Time.
-                # Must be specified on the primary, forbidden on the secondary.
-                mclt 3600;
-
-                # Address or DNS name on which this node listens for connections
-                # from its failover peer.
-                address {{ dhcp_failover.primary_host }};
-                peer address {{ dhcp_failover.secondary_host }};
-{% endif %}
-{% if inventory_hostname == dhcp_failover.secondary_host %}
-                secondary;
-                # Address and peer address are reversed on the secondary node.
-                address {{ dhcp_failover.secondary_host }};
-                peer address {{ dhcp_failover.primary_host }};
-{% endif %}
-
-                # The following options can be shared between primary and
-                # secondary failover peers.
-                port 647;
-                peer port 647;
-                split 128;
-                max-response-delay 30;
-                max-unacked-updates 10;
-                load balance max seconds 3;
-          }
-{% endif %}