ansible/roles/prometheus/templates/snmp.yml.j2

---
{{ ansible_managed | comment }}

# TODOlist :
# - Faire fonctionner le monitoring des switchs défini ici
#   * Configurer tous les switchs avec un compte SNMPv3
#   * Mettre l'inventaire des switchs dans Ansible
# - Optimiser les règles pour les bornes Unifi,
#   on pourrait indexer avec les SSID

eatonups:
  walk:
  - 1.3.6.1.2.1.33.1.2
  - 1.3.6.1.2.1.33.1.3
  - 1.3.6.1.2.1.33.1.4
  - 1.3.6.1.4.1.534.1.6
  - 1.3.6.1.4.1.318.1.1.10.2.3.2.1.4
  get:
  - 1.3.6.1.2.1.1.3.0
  metrics:
  - name: sysUpTime
    oid: 1.3.6.1.2.1.1.3
    type: gauge
    help: The time (in hundredths of a second) since the network management portion
      of the system was last re-initialized. - 1.3.6.1.2.1.1.3
  - name: upsBatteryStatus
    oid: 1.3.6.1.2.1.33.1.2.1
    type: gauge
    help: The indication of the capacity remaining in the UPS system's batteries -
      1.3.6.1.2.1.33.1.2.1
  - name: upsEstimatedMinutesRemaining
    oid: 1.3.6.1.2.1.33.1.2.3
    type: gauge
    help: An estimate of the time to battery charge depletion under the present load
      conditions if the utility power is off and remains off, or if it were to be
      lost and remain off. - 1.3.6.1.2.1.33.1.2.3
  - name: upsInputVoltage
    oid: 1.3.6.1.2.1.33.1.3.3.1.3
    type: gauge
    help: The magnitude of the present input voltage. - 1.3.6.1.2.1.33.1.3.3.1.3
    indexes:
    - labelname: upsInputLineIndex
      type: gauge
  - name: upsOutputSource
    oid: 1.3.6.1.2.1.33.1.4.1
    type: gauge
    help: The present source of output power - 1.3.6.1.2.1.33.1.4.1
  - name: upsOutputVoltage
    oid: 1.3.6.1.2.1.33.1.4.4.1.2
    type: gauge
    help: The present output voltage. - 1.3.6.1.2.1.33.1.4.4.1.2
    indexes:
    - labelname: upsOutputLineIndex
      type: gauge
  - name: upsOutputPower
    oid: 1.3.6.1.2.1.33.1.4.4.1.4
    type: gauge
    help: The present output true power. - 1.3.6.1.2.1.33.1.4.4.1.4
    indexes:
    - labelname: upsOutputLineIndex
      type: gauge
  - name: upsOutputPercentLoad
    oid: 1.3.6.1.2.1.33.1.4.4.1.5
    type: gauge
    help: The percentage of the UPS power capacity presently being used on this output
      line, i.e., the greater of the percent load of true power capacity and the percent
      load of VA. - 1.3.6.1.2.1.33.1.4.4.1.5
    indexes:
    - labelname: upsOutputLineIndex
      type: gauge
  - name: xupsEnvRemoteTemp
    oid: 1.3.6.1.4.1.318.1.1.10.2.3.2.1.4
    type: gauge
    help: The reading of an EMP's temperature sensor (APC MIB) - 1.3.6.1.4.1.318.1.1.10.2.3.2.1.4
  - name: xupsEnvRemoteTemp
    oid: 1.3.6.1.4.1.534.1.6.5
    type: gauge
    help: The reading of an EMP's temperature sensor (Eaton MIB) - 1.3.6.1.4.1.534.1.6.5
  - name: xupsEnvRemoteHumidity
    oid: 1.3.6.1.4.1.534.1.6.6
    type: gauge
    help: The reading of an EMP's humidity sensor. - 1.3.6.1.4.1.534.1.6.6
  version: 1
  auth:
    community: public

procurve_switch:
  walk:
    - 1.3.6.1.2.1.31.1.1.1.10
    - 1.3.6.1.2.1.31.1.1.1
    - 1.3.6.1.2.1.2.2.1.2
    - 1.3.6.1.2.1.31.1.1.1.18
  get:
    - 1.3.6.1.2.1.1.3.0
    - 1.3.6.1.2.1.1.5.0
    - 1.3.6.1.2.1.1.6.0
  metrics:
    - name: sysUpTime
      oid: 1.3.6.1.2.1.1.3
      type: gauge
      help: The time (in hundredths of a second) since the network management
        portion of the system was last re-initialized. - 1.3.6.1.2.1.1.3
    - name: sysName
      oid: 1.3.6.1.2.1.1.5
      type: DisplayString
      help: An administratively-assigned name for this managed node
        - 1.3.6.1.2.1.1.5
    - name: sysLocation
      oid: 1.3.6.1.2.1.1.6
      type: DisplayString
      help: The physical location of this node (e.g., 'telephone closet, 3rd
        floor') - 1.3.6.1.2.1.1.6
    - name: ifHCOutOctets
      oid: 1.3.6.1.2.1.31.1.1.1.10
      type: counter
      help: The total number of octets transmitted out of the interface,
        including framing characters - 1.3.6.1.2.1.31.1.1.1.10
      indexes:
        - labelname: ifIndex
          type: gauge
      lookups:
        - labels:
            - ifIndex
          labelname: ifDescr
          oid: 1.3.6.1.2.1.2.2.1.2
          type: DisplayString
        - labels:
            - ifIndex
          labelname: ifName
          oid: 1.3.6.1.2.1.31.1.1.1.1
          type: DisplayString
    - name: ifHCInOctets
      oid: 1.3.6.1.2.1.31.1.1.1.6
      type: counter
      help: The total number of octets received on the interface, including
        framing characters - 1.3.6.1.2.1.31.1.1.1.6
      indexes:
        - labelname: ifIndex
          type: gauge
      lookups:
        - labels:
            - ifIndex
          labelname: ifDescr
          oid: 1.3.6.1.2.1.2.2.1.2
          type: DisplayString
        - labels:
            - ifIndex
          labelname: ifName
          oid: 1.3.6.1.2.1.31.1.1.1.1
          type: DisplayString
  version: 2
  auth:
    community: "{{ snmp_switch_community }}"

ubiquiti_unifi:
  walk:
  - 1.3.6.1.4.1.41112.1.6
  get:
  - 1.3.6.1.2.1.1.5.0
  - 1.3.6.1.2.1.1.6.0
  metrics:
# Pour faire une WifiMap un jour, on peut entrer la location dans la conf des bornes
#  - name: sysLocation
#    oid: 1.3.6.1.2.1.1.6
#    type: DisplayString
#    help: The physical location of this node (e.g., 'telephone closet, 3rd floor')
#      - 1.3.6.1.2.1.1.6
  - name: unifiVapIndex
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.1
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.1'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapChannel
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.4
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.4'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapEssId
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.6
    type: DisplayString
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.6'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapName
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.7
    type: DisplayString
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.7'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifi_vap_num_stations
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.8
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.8'
    indexes:
    - labelname: unifi_vap_index
      type: gauge
    lookups:
    - labels: [unifi_vap_index]
      labelname: unifi_vap_essid
      oid: 1.3.6.1.4.1.41112.1.6.1.2.1.6
      type: DisplayString
    - labels: [unifi_vap_index]
      labelname: unifi_vap_radio
      oid: 1.3.6.1.4.1.41112.1.6.1.2.1.9
      type: DisplayString
    - labels: []
      labelname: unifi_vap_index
#  - name: unifiVapNumStations
#    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.8
#    type: gauge
#    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.8'
#    indexes:
#    - labelname: unifiVapIndex
#      type: gauge
  - name: unifiVapRadio
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.9
    type: DisplayString
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.9'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxBytes
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.10
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.10'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxCrypts
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.11
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.11'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxDropped
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.12
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.12'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxErrors
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.13
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.13'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxFrags
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.14
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.14'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapRxPackets
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.15
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.15'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxBytes
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.16
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.16'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxDropped
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.17
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.17'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxErrors
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.18
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.18'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxPackets
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.19
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.19'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxRetries
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.20
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.20'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapTxPower
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.21
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.21'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapUp
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.22
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.1.2.1.22'
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiVapUsage
    oid: 1.3.6.1.4.1.41112.1.6.1.2.1.23
    type: DisplayString
    help: guest or regular user - 1.3.6.1.4.1.41112.1.6.1.2.1.23
    indexes:
    - labelname: unifiVapIndex
      type: gauge
  - name: unifiIfIndex
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.1
    type: gauge
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.1'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfName
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.5
    type: DisplayString
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.5'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfRxBytes
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.6
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.6'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfRxDropped
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.7
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.7'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfRxError
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.8
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.8'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfRxMulticast
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.9
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.9'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfRxPackets
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.10
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.10'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfTxBytes
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.12
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.12'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfTxDropped
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.13
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.13'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfTxError
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.14
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.14'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiIfTxPackets
    oid: 1.3.6.1.4.1.41112.1.6.2.1.1.15
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.2.1.1.15'
    indexes:
    - labelname: unifiIfIndex
      type: gauge
  - name: unifiApSystemModel
    oid: 1.3.6.1.4.1.41112.1.6.3.3
    type: DisplayString
    help: ' - 1.3.6.1.4.1.41112.1.6.3.3'
  - name: unifiApSystemUptime
    oid: 1.3.6.1.4.1.41112.1.6.3.5
    type: counter
    help: ' - 1.3.6.1.4.1.41112.1.6.3.5'
  version: 3
  auth:
    security_level: authPriv
    username: snmp_prometheus
    password: {{ snmp_unifi_password }}
    auth_protocol: SHA
    priv_protocol: AES
    priv_password: {{ snmp_unifi_password }}


apc_pdu:
  walk:
  - 1.3.6.1.4.1.318.1.1.26.10.2.2.1.8
  - 1.3.6.1.4.1.318.1.1.26.4.3.1.4
  - 1.3.6.1.4.1.318.1.1.26.4.3.1.5
  - 1.3.6.1.4.1.318.1.1.26.4.3.1.6
  - 1.3.6.1.4.1.318.1.1.26.6.3.1.9
  - 1.3.6.1.4.1.318.1.1.26.9.4.3.1.7
  metrics:
  - name: rPDU2SensorTempHumidityStatusTempC
    oid: 1.3.6.1.4.1.318.1.1.26.10.2.2.1.8
    type: gauge
    help: Sensor temperature reading in tenths of degrees Celsius - 1.3.6.1.4.1.318.1.1.26.10.2.2.1.8
    indexes:
    - labelname: rPDU2SensorTempHumidityStatusIndex
      type: gauge
  - name: rPDU2DeviceStatusLoadState
    oid: 1.3.6.1.4.1.318.1.1.26.4.3.1.4
    type: gauge
    help: Indicates the present load status of the Rack PDU - 1.3.6.1.4.1.318.1.1.26.4.3.1.4
    indexes:
    - labelname: rPDU2DeviceStatusIndex
      type: gauge
  - name: rPDU2DeviceStatusPower
    oid: 1.3.6.1.4.1.318.1.1.26.4.3.1.5
    type: gauge
    help: The power consumption of the Rack PDU load in hundredths of kilowatts -
      1.3.6.1.4.1.318.1.1.26.4.3.1.5
    indexes:
    - labelname: rPDU2DeviceStatusIndex
      type: gauge
  - name: rPDU2DeviceStatusPeakPower
    oid: 1.3.6.1.4.1.318.1.1.26.4.3.1.6
    type: gauge
    help: The peak power consumption of the Rack PDU load in hundredths of kilowatts
      - 1.3.6.1.4.1.318.1.1.26.4.3.1.6
    indexes:
    - labelname: rPDU2DeviceStatusIndex
      type: gauge
  - name: rPDU2PhaseStatusPowerFactor
    oid: 1.3.6.1.4.1.318.1.1.26.6.3.1.9
    type: gauge
    help: Indicates the load power factor, in hundredths, of the Rack PDU phase being
      queried - 1.3.6.1.4.1.318.1.1.26.6.3.1.9
    indexes:
    - labelname: rPDU2PhaseStatusIndex
      type: gauge
  - name: rPDU2OutletMeteredStatusPower
    oid: 1.3.6.1.4.1.318.1.1.26.9.4.3.1.7
    type: gauge
    help: Indicates the power draw of the load on the Rack PDU outlet being queried
      - 1.3.6.1.4.1.318.1.1.26.9.4.3.1.7
    indexes:
    - labelname: rPDU2OutletMeteredStatusIndex
      type: gauge
  version: 3
  auth:
    security_level: authPriv
    username: {{ snmp_pdu_user }}
    password: {{ snmp_pdu_password }}
    auth_protocol: SHA
    priv_protocol: AES
    priv_password: {{ snmp_pdu_password }}

ilo:
  walk:
  - 1.3.6.1.4.1.232.6.2.14.4 # Resilient memory
  - 1.3.6.1.4.1.232.6.2.15.3 # Power meter
  - 1.3.6.1.4.1.232.6.2.16.1 # POST tests
  - 1.3.6.1.4.1.232.6.2.17.1 # Battery
  - 1.3.6.1.4.1.232.6.2.6.8.1.3 # Temperature sensors location
  - 1.3.6.1.4.1.232.6.2.6.8.1.4 # Temperature sensors value
  - 1.3.6.1.4.1.232.6.2.6.8.1.5 # Temperature sensors limit
  - 1.3.6.1.4.1.232.6.2.6.8.1.6 # Temperature sensors condition
  - 1.3.6.1.4.1.232.6.2.6.7.1.3 # Fans location
  - 1.3.6.1.4.1.232.6.2.6.7.1.9 # Fans condition
  - 1.3.6.1.4.1.232.6.2.9.3.1.5 # Power supply
  - 1.3.6.1.4.1.232.9.2.2 # iLO
  metrics:
  - name: cpqHeResilientMemCondition
    oid: 1.3.6.1.4.1.232.6.2.14.4
    type: EnumAsStateSet
    help: The resilient memory condition - 1.3.6.1.4.1.232.6.2.14.4
    enum_values:
      1: other
      2: ok
      3: degraded
      4: failed
  - name: cpqHePowerMeterCurrReading
    oid: 1.3.6.1.4.1.232.6.2.15.3
    type: gauge
    help: This is the current Power Meter reading in Watts - 1.3.6.1.4.1.232.6.2.15.3
  - name: cpqHeHWBiosCondition
    oid: 1.3.6.1.4.1.232.6.2.16.1
    type: EnumAsStateSet
    help: This value indicates an error has been detected during Pre-OS Test (POST)
      or during initial hardware initialization - 1.3.6.1.4.1.232.6.2.16.1
    enum_values:
      1: other
      2: ok
      3: degraded
      4: failed
  - name: cpqHeSysBatteryCondition
    oid: 1.3.6.1.4.1.232.6.2.17.1
    type: EnumAsStateSet
    help: The battery condition - 1.3.6.1.4.1.232.6.2.17.1
    indexes:
    - labelname: cpqHeSysBatteryChassis
      type: gauge
    - labelname: cpqHeSysBatteryIndex
      type: gauge
    enum_values:
      1: other
      2: ok
      3: degraded
      4: failed
  - name: cpqHeTemperatureLocale
    oid: 1.3.6.1.4.1.232.6.2.6.8.1.3
    type: EnumAsInfo
    help: This specifies the location of the temperature sensor present in the system.
      - 1.3.6.1.4.1.232.6.2.6.8.1.3
    indexes:
    - labelname: cpqHeTemperatureChassis
      type: gauge
    - labelname: cpqHeTemperatureIndex
      type: gauge
    enum_values:
      1: other
      2: unknown
      3: system
      4: systemBoard
      5: ioBoard
      6: cpu
      7: memory
      8: storage
      9: removableMedia
      10: powerSupply
      11: ambient
      12: chassis
      13: bridgeCard
  - name: cpqHeTemperatureCelsius
    oid: 1.3.6.1.4.1.232.6.2.6.8.1.4
    type: gauge
    help: This is the current temperature sensor reading in degrees celsius - 1.3.6.1.4.1.232.6.2.6.8.1.4
    indexes:
    - labelname: cpqHeTemperatureChassis
      type: gauge
    - labelname: cpqHeTemperatureIndex
      type: gauge
  - name: cpqHeTemperatureThreshold
    oid: 1.3.6.1.4.1.232.6.2.6.8.1.5
    type: gauge
    help: This is the shutdown threshold temperature sensor setting in degrees celsius
      - 1.3.6.1.4.1.232.6.2.6.8.1.5
    indexes:
    - labelname: cpqHeTemperatureChassis
      type: gauge
    - labelname: cpqHeTemperatureIndex
      type: gauge
  - name: cpqHeTemperatureCondition
    oid: 1.3.6.1.4.1.232.6.2.6.8.1.6
    type: EnumAsStateSet
    help: The Temperature sensor condition - 1.3.6.1.4.1.232.6.2.6.8.1.6
    indexes:
    - labelname: cpqHeTemperatureChassis
      type: gauge
    - labelname: cpqHeTemperatureIndex
      type: gauge
    enum_values:
      1: other
      2: ok
      3: degraded
      4: failed
  - name: cpqHeFltTolFanLocale
    oid: 1.3.6.1.4.1.232.6.2.6.7.1.3
    type: EnumAsInfo
    help: This specifies the location of the fan present in the system.
      - 1.3.6.1.4.1.232.6.2.6.7.1.3
    indexes:
    - labelname: cpqHeFltTolFanChassis
      type: gauge
    - labelname: cpqHeFltTolFanIndex
      type: gauge
    enum_values:
      1: other
      2: unknown
      3: system
      4: systemBoard
      5: ioBoard
      6: cpu
      7: memory
      8: storage
      9: removableMedia
      10: powerSupply
      11: ambient
      12: chassis
      13: bridgeCard
  - name: cpqHeFltTolFanCondition
    oid: 1.3.6.1.4.1.232.6.2.6.7.1.9
    type: EnumAsStateSet
    help: The fan condition - 1.3.6.1.4.1.232.6.2.6.7.1.9
    indexes:
    - labelname: cpqHeFltTolFanChassis
      type: gauge
    - labelname: cpqHeFltTolFanIndex
      type: gauge
    enum_values:
      1: other
      2: ok
      3: degraded
      4: failed
  - name: cpqHeFltTolPowerSupplyStatus
    oid: 1.3.6.1.4.1.232.6.2.9.3.1.5
    type: EnumAsStateSet
    help: The status of the power supply. - 1.3.6.1.4.1.232.6.2.9.3.1.5
    indexes:
    - labelname: cpqHeFltTolPowerSupplyChassis
      type: gauge
    - labelname: cpqHeFltTolPowerSupplyBay
      type: gauge
    enum_values:
      1: noError
      2: generalFailure
      3: bistFailure
      4: fanFailure
      5: tempFailure
      6: interlockOpen
      7: epromFailed
      8: vrefFailed
      9: dacFailed
      10: ramTestFailed
      11: voltageChannelFailed
      12: orringdiodeFailed
      13: brownOut
      14: giveupOnStartup
      15: nvramInvalid
      16: calibrationTableInvalid
      17: noPowerInput
  - name: cpqSm2CntlrInterfaceStatus
    oid: 1.3.6.1.4.1.232.9.2.2.17
    type: EnumAsStateSet
    help: Remote Insight/ Integrated Lights-Out Interface Status - 1.3.6.1.4.1.232.9.2.2.17
    enum_values:
      1: other
      2: ok
      3: notResponding
  - name: cpqSm2CntlriLOSecurityOverrideSwitchState
    oid: 1.3.6.1.4.1.232.9.2.2.27
    type: EnumAsStateSet
    help: Integrated Lights-Out Security Override Switch State - 1.3.6.1.4.1.232.9.2.2.27
    enum_values:
      1: notSupported
      2: set
      3: notSet
  - name: cpqSm2CntlrLicenseActive
    oid: 1.3.6.1.4.1.232.9.2.2.30
    type: EnumAsStateSet
    help: Remote Insight License State - 1.3.6.1.4.1.232.9.2.2.30
    enum_values:
      1: none
      2: iloAdvanced
      3: iloLight
      4: iloAdvancedBlade
      5: iloStandard
      6: iloEssentials
      7: iloScaleOut
      8: iloAdvancedPremiumSecurity
  - name: cpqSm2CntlrServerPowerState
    oid: 1.3.6.1.4.1.232.9.2.2.32
    type: EnumAsStateSet
    help: The current power state for the server - 1.3.6.1.4.1.232.9.2.2.32
    enum_values:
      1: unknown
      2: poweredOff
      3: poweredOn
      4: insufficientPowerOrPowerOnDenied
  version: 3
  # Reduce timeout to retry faster
  timeout: 1s
  auth:
    security_level: authPriv
    username: {{ snmp_ilo_user }}
    password: {{ snmp_ilo_auth }}
    auth_protocol: SHA
    priv_protocol: AES
    priv_password: {{ snmp_ilo_priv }}

...