ansible/roles/networking/templates/raspbian_dhcpcd.conf.j2

{{ ansible_managed | comment }}

# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.

# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel

# Inform the DHCP server of our hostname for DDNS.
hostname

# Use the hardware address of the interface for the Client ID.
clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
#duid

# Persist interface configuration when dhcpcd exits.
persistent

# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit

# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu

# Most distributions have NTP support.
#option ntp_servers

# A ServerID is required by RFC2131.
require dhcp_server_identifier

# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private

{% for item in lookup('dict', interfaces, wantlist=True) %}
{% if item.value.type == 'static' %}
interface {{ item.key }}
{% if 'ipv4' in item.value %}
static ip_address={{ item.value.ipv4 }}/{{ item.value.netmaskv4 }}
{% endif %}
{% if 'gateway' in item.value %}
static routers={{ item.value.gateway }}
{% endif %}

{% endif %}
{% endfor %}